Rohde & Schwarz FSH6 Spectrum Analyzer 100 kHz to 6 GHz, 100 Hz RBW
Rohde & Schwarz FSH626 Spectrum Analyzer 100 kHz to 6 GHz, 100 Hz RBW, Internal Tracking Generator

FSH-B1 Distance to Fault Measurement For FSH313/323/626 and FSH3-TV only. Requires FSH-Z2 or FSH-Z3.
FSH-K1 Remote Control Software (RS-232)
FSH-K2 Vector Reflection/Transmission Measurements For FSH313/323/626, FSH3-TV only
FSH-K3 Receiver Mode
FSH-K4 3GPP FDD Code Domain Power BTS/Node B Measurement For FSH323 Only.
FSH-Z1 Average Power Sensor 10 MHz to 8 GHz, 200 pW to 200 mW
FSH-Z2 VSWR Bridge & Power Divider Includes open, short load calibration standards. For models with tracking generator only.
FSH-Z3 VSWR bridge with DC bias and bypass switch 10 MHz to 6 GHz, 50 Ohms, includes open, short, load for calibration. For FSH626 only.
FSH-Z14 Directional Power Sensor 25 MHz to 1 GHz, 30 mW to 120 (300) W
FSH-Z44 Directional Power Sensor 200 MHz to 4 GHz, 30 mW to 120 (300) W
FSH-Z18 Average Power Sensor 10 MHz to 18 GHz, 200 pW to 200 mW
FSH-Z20 Cable for option FSH-B1 1 m, male/female Type-N.
FSH-Z21 12VDC Car Adapter
FSH-Z22 Serial to Parallel Interface Converter Interface converter for Deskjet, Laserjet, Epson FX, Postscript printers.
FSH-Z25 Soft Carrying Bag
FSH-Z26 Hard Carry Case
FSH-Z32 Spare Battery Pack
FSH-Z33 Spare AC Adapter
HZ-15 Probe set for E and H nearfield emissions
HZ-16 Preamplifier 3 GHz, 20 dB, for HZ-15

More products Rohde & Schwarz

MICROWAVE SIGNAL GENERATOR 10 MHZ..20 GHZ/ 27 GHZ/ 30 GHZ/ 40 GHZ ROHDE & SCHWARZ SMR

• 1 GHz to 20 GHz, 27 GHz, 30 GHz or 40 GHz Frequency ranges
• 10 MHz to 1 GHz Optional Frequency Extension
• 1 kHz Frequency resolution(0.1 Hz optional)

PORTABLE SPECTRUM ANALYZER 9 KHZ..3.6 GHZ ROHDE & SCHWARZ FSH4

• 9 kHz to 3.6 GHz Frequency range
• 100 Hz to 3 MHz RBW
• <-141dBm sensitivity, with preamp <-161 dBm

VECTOR SIGNAL GENERATOR 100 KHZ..2.2 GHZ/ 3 GHZ/ 4 GHZ/ 6 GHZ ROHDE & SCHWARZ SMU200A

• 100 kHz to 2.2 GHz, 3 GHz, 4 GHz or 6 GHz Frequency ranges for the first RF path
• Optional second RF path up to 2.2 GHz or 3 GHz
• Up to two complete baseband paths
• 200 MHz RF I/Q modulator bandwidth
• High output power up to +19 dBm (PEP), overrange + 26 dBm
• 2 x 2 MIMO with realtime fading possible

DIGITAL OSCILLOSCOPE 4 X 500 MHZ ROHDE & SCHWARZ RTM1054

• 500 MHz bandwidth
• 4 analog channels
• 2.5 GSa/s sample rate, 5 GS/s interleaved

RF USB POWER METER USB 10 MHZ..8 GHZ ROHDE & SCHWARZ NRP-Z11

• 10 MHz to 8 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals

R&S ZNL VECTOR NETWORK ANALYZER

• Frequency range from 5 kHz to 3 GHz (R&S®ZNL3) or 5 kHz to 6 GHz (R&S®ZNL6)
• Two-port vector network analyzer for bidirectional measurements
• Wide dynamic range of typ. 130 dB