4CH oscilloscope, with 1CH Arbitary/function waveform generator, independent keys of oscilloscope and waveform generator which is easy to operate at the same time.. 80-250MHz bandwidth, minimum measurement range 500Î¼V /div�¼�1GS/s sample rate�¼�advanced digital trigger system, high trigger sensitivity, low trigger jitter�¼�high resolution 7 inch 64K color TFT�¼�800*480�¼�

Features:

4CH oscilloscope+EXT+DVM+auto range function
80-250MHz bandwidth�¼�minimum range 500Î¼V /div�¼�1GS/s sample rate.
Over 32 types of auto measurement function
Advanced digital trigger system, high trigger sensitivity.
Over 14 types of trigger function: edge, overtime, pulse, pattern, interval, etc.
Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
Integrated USB Host/Device, convenient to communicate with PC. Support U-stick storage/systerm update.
Support a variety of SCPI remote control command
Support optional RS232 port, LAN port. (Optional)
Stable and reliable quality, sturdy and durable.

More products HANTEK

HANTEK DSO3000 SERIES (200MSA/S) USB SCOPE

• 8--36V wide range of input voltage, suitable for vehicle power test.
• USB 2.0 interface, LAN optional.
• More than 20 kinds of automatic measurement function, PASS/FAIL Check function, is suitable for engineering application.
• Excellent industrial design,similar interface with bench oscilloscope. Easy to use.

HANTEK DSO5000BM OSCILLOSCOPE

• Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
• USB host and device connectivity, standard
• Multiple automatic measurements
• Four math functions, including FFTs standard

HANTEK DSO8000 PORTABLE OSCILLOSCOPE WITH MULTIMETER

• Excellent Industrial Design. Direct key for Each Channel, time base, Trigger and DMM, easy to operate.
• Large 5.7 inch TFT Color LCD Display, LED backlight, Display clearly.
• USB Host/Device 2.0 full-speed interface, support removeable disk, LAN Option; Easy to control by PC or long-distance.
• Battery Power Operation (Installed) Industrial Design.
• Save waveform in the following: jpg/bmp graphic file, MS excel/word file.

HANTEK HT3000PB POWER SUPPLY

• SMD adhesive sheet element technology for internal PCB construction
• Two LEDS Display output current and voltage
• Multiloop high precision voltage regulation
• Progressive current regulation

HANTEK HT3000PA POWER SUPPLY

• Overload protection circuit
• Low ripple voltage:<1mVp-p
• Output polarity:positive or negative
• Rugged reinfirced metal frame construction

HANTEK 1008C AUTOMOBILE OSCILLOSCOPE

• Ignition: primary and secondary
• Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position
• Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus
• Performer: Petrol/Diesel
• Starter and charging circuits

HANTEK DSO3000(A) SERIES (1GSA/S)

• More than 20 kinds of automatic measurement function, PASS/FAIL Check function, fit for engineering application.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.

HANTEK HT824 - PROCESS CALIBRATOR

• 5 1/2 digit input/output display.
• Manual/auto cold junction compensation and setting.
• The temperature value can be directly measured/output.
• Auto power off when the voltage of battery is low.

HANTEK 1008A USB OSCILLOSCOPE 8-CHANNELS

• USB 2.0 interface plug and play, and no need extra power supply;
• More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use;
• Software support: Windows NT, Window 2000, Windows XP, VISTA, Windows 7, Windows 8.

HANTEK LA5034 LOGIC ANALYZER

• Continuously variable pre/post trigger position,Advanced Multi-Level Triggering
• +6V to -6V Adjustable Logic Threshold
• CAN, I2C, SPI and RS232 Interpreters
• Built-in 250MHz Frequency Counter