The MD 9225 is a versatile current clamp meter with perfect combination of size and built-in functions. It measures AC/DC current and voltage, capacitance, temperature, full range resistance and captures In-rush current. Display with large easy-to-read figures and one-handed operation make MD 9225 an extremely easy-to-use. This compact instrument combines a high level of functionality, small size and portability. All built-in features make MD 9225 a perfect tool for advanced applications.

TEST FUNCTIONS

TRMS AC, DC voltage measurement;
TRMS AC, DC current measurement;
Capacitance measurement;
Resistance measurement;
Diode test;
Frequency measurement;
Continuity test (acoustic signaling);
Temperature measurement.

TECHNICAL DATA

Dimensions (w x h x l): 63 x 40 x 188 mm

Mass (without accessories): 218 g

Accesorii standard

MD 9225 Standard set

Current clamp MD 9225
Test lead with probe, 2 pcs
Thermocouple probe, type K
Pouch
1.5 V battery, type AAA, 2 pcs
Instruction manual
Warranty

Alte produse METREL

TESTER ELECTROSECURITATE ECHIPAMENTE PORTABILE CF. STANDARD IEC EN VDE METREL MI 3304 BETAGT PLUS

• Continuity tests (200 mA, 4 A, 10 A, 25 A).
• Insulation resistance.
• Substitute leakage current.
• Differential leakage current.
• Touch leakage current.
• IEC cord polarity test.
• Leakage and load TRMS current measurement with current clamp.

TESTER SECURITATE ECHIPAMENTE ELECTRICE PORTABILE METREL MI 3311 GAMMAGT

• Continuity test with 200 mA.
• Insulation resistance.
• Insulation resistance of isolated accessible conductive parts.
• Substitute leakage current.
• Substitute leakage current of isolated. accessible conductive parts.
• IEC cord polarity test.
• Voltage.
• Functional and visual inspection.

TESTER RCD CURENTI DE SCURGERE SCURTCIRCUIT DISJUNCTOARE SI INTRERUPATOARE METREL MI 3122 SMARTEC Z

• Loop impedance / prospective fault current
• Line impedance / prospective short-circuit current
• Built-in fuse characteristics for quick evaluation of measuring results
• RCD tests (trip out time, contact voltage, ramp test, Autotest)
• Testing on 1- and 3-phase systems
• Phase sequence test

TESTER REZISTENTA PRIZA DE PAMANT METREL MI 3123 SMARTEC

• Supports all types of earthing resistance measurements:
• - Standard earthing resistance measurement with spikes
• - Selective earthing resistance test with one current clamp
• - Selective (contactless) earthing resistance with two current clamps
• - Specific earth resistance measurement
• Leakage current tests with current clamps
• Load current tests with current clamps
• High accuracy, very high immunity against external noise
• Preprogrammed limits

TESTER IMPEDANTA LINIE SI BUCLA INTRERUPTA RETEA ELECTRICA LA CURENTI INALTI METREL A 1143 EURO Z 290 A

• High precision line impedance;
• High precision fault loop impedance;
• Contact voltage.
• Range widening: adapts the instruments to read from 0.1 m? up to 19.99 ?.
• Multi-system testing: works on both single phase and 3-phase systems (110 V to 440 V).

MEGOHMMETRU REZISTENTA IZOLATIE 2500V SI CONTINUITATE METREL MI 3121H SMARTEC 2.5KV

• Insulation resistance up to 100 GO with DC voltage up to 2.5 kV;
• PI, DAR calculation;
• Continuity of PE conductors with 200 mA test current and polarity change;
• Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping;
• TRMS voltage and frequency.

PLATFORMA SIMULARE INSTALATIE ELECTRICA REZIDENTIALA METREL MI 2166 DEMO

• Simulation of common electrical installation usually met in an individual house or apartment
• Various test methods supported by different test instruments can be presented.
• Acceptable or faulty parameters can be preset by five »fault� switches.
• Some real elements of electrical installation are placed on the front panel like RCD protection device, ON/OFF switch

TESTER CABLU COAXIAL SI RETEA LAN METREL MI 2014 CABLE SCANNER

• easy to use LAN tester with wide variety of functions for fault finding
• troubleshooting on IT cabling connections
• TDR facility with adjustable NVP
• determination of distance to the fault
• cable length measurement
• pair determination in multi-pair cables
• crossed pairs,
• crosstalk,
• short-circuit,
• mismatched pairs,
• bad contacts,
• no shield etc..

CLESTE AMPERMETRIC CURENTI SLABI DE SCURGERE IMPAMANTARE METREL MD 9270

• TRMS AC voltage and current measurement.
• Frequency measurement.
• Power: measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement).
• Intelligent loss analysis: complex algorithms detect loss and allow determining possible reasons for current loss.
• Harmonics: measures current or voltage harmonic components and a percentage value of a harmonic up to the 49th.
• Total Harmonic Distortion (THD)
• Power Factor (PF).

TESTER SECURITATE ECHIPAMENTE ELECTRICE CF. STANDARD IEC EN VDE METREL MI 3305 OMEGAGT PLUS