The MD 9250 is the first Clamp Meter that meets overvoltage category CAT IV 1000 V. MD 9250 is a high quality clamp meter specially designed for single-hand operation, built-in measuring functions; TRMS AC/DC (current, voltage), capacitance, temperature and full range resistance makes this instrument an ideal tool for the most demanding applications in the industrial sector. The large jaws capacity of (max. 55 mm) in diameter allows AC/DC current measurements up to 2000 A. High resolution and accuracy, 2-line LCD display fast data acquisition and transfer (via optical interface), non-contact voltage detection, and auto-check function are highlights of the instrument.

TEST FUNCTIONS

TRMS AC, DC voltage measurement;
TRMS AC, DC current measurement;
Capacitance measurement;
Resistance measurement;
Diode test;
Frequency measurement;
Electric field detection;
Continuity test (acoustic signaling);
Temperature measurement.

TECHNICAL DATA

Dimensions (w x h x l): 97 x 43 x 264 mm

Mass (without accessories): 608 g

Accesorii standard

MD 9250 Standard set

Current clamp MD 9250
Test lead with probe, 2 pcs
Thermocouple probe, type K
Pouch
1.5 V battery, type AAA, 2 pcs
Instruction manual
Warranty

Alte produse METREL

MICROOHMMETRU PORTABIL REZISTENTA INFASURARE TRANSFORMATOR 2A METREL MI 3242

• Bidirectional resistance measurement from 1 µO up to 199,9 O
• test current up to 2 A
• High overvoltage protection (CAT III / 600 V)
• Internal protection cicuit
• 50 Hz / 60 Hz ripple detection and rejection.
• more than 800 measurements of 500 mO load 8 2 A test current & 15 s measurement duration
• Pre-programmed limits with PASS/FAIL evaluation of measurement result
• Up to 1500 test results with timestamp can be stored in internal memory.
• PC SW HVLink PRO enables downloading, review, analyses and printing of test results.

MEGOHMMETRU 1000V REZISTENTA IZOLATIE, CONTINUITATE CONDUCTOARE, DISPERSIE METREL MI 3102 EUROTEST XE

• DC insulation resistance,
• PE conductor continuity test,
• Line and Loop resistances with Fuse evaluation table built-in,
• RCD test with Trip lock function, phase sequence in 3-phase systems,
• on-line voltage monitor,
• 3-wire Earth resistance test with built-in battery operated generator,
• Leakage Current test,
• test of Luminance with optional LUX meter probe.

MICROHMETRU PORTABIL REZISTENTE MICI 2A METREL MI 3242

MULTIMETRU DIGITAL PORTABIL INDUSTRIAL METREL MD 9040

• CAT IV/1000 V overvoltage category
• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 60nF..25mF Capacitance measurement;
• 600O..60MO Resistance measurement;
• Diode test;
• 5Hz..1MHz Frequency of digital signals measurement

TESTER INSTALATII ELECTRICE 1KV METREL MI 3125B EUROTEST COMBO

• Insulation resistance with DC voltage
• Continuity of PE conductors with 200 mA test current with polarity change
• Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping
• Line impedance
• Loop impedance
• Loop impedance with Trip Lock RCD function
• TRMS voltage and frequency
• Phase sequence
• RCD testing (general and selective, type AC, A and B)
• Earth resistance (3-wire method).

TESTER SECURITATE ECHIPAMENTE ELECTRICE PORTABILE METREL MI 3311 GAMMAGT

• Continuity test with 200 mA.
• Insulation resistance.
• Insulation resistance of isolated accessible conductive parts.
• Substitute leakage current.
• Substitute leakage current of isolated. accessible conductive parts.
• IEC cord polarity test.
• Voltage.
• Functional and visual inspection.

MEGOHMMETRU REZISTENTA IZOLATIE 2500V SI CONTINUITATE METREL MI 3121H SMARTEC 2.5KV

• Insulation resistance up to 100 GO with DC voltage up to 2.5 kV;
• PI, DAR calculation;
• Continuity of PE conductors with 200 mA test current and polarity change;
• Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping;
• TRMS voltage and frequency.

LOCATOR TRASEE CABLURI METREL MI 2093 LINE TRACER

• Field proven instrument for under-wall low voltage installation tracing
• fuse finding
• short-circuit spot determination and metal installation tracing
• Can be used on energized or voltage-free systems.
• Tips and detailed descriptions of connection schemes for various combinations from everyday practice.

TRANSFORMATOR VARIABIL MONOFAZAT TRIFAZAT PORTABIL METREL

• Single-phase Built-in Variable Auto-Transformers
• Three-phase Built-in Variable Auto-Transformers
• Motor driven Variable Transformers
• Desk top Variable Transformers

MULTIMETRU DIGITAL PORTABIL PROFESIONAL DE PRECIZIE METREL MD 9060

• large 2-line 500.000 counts LCD display
• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 50nF..25mF Capacitance measurement;
• 500O..50MO Resistance measurement;
• Diode test;
• 5Hz..1MHz Frequency of digital signals measurement
• Temperature measurement(thermocouple type K included)