The Multistandard and Multisystem Generator of analogue and digital television signals GV-998 with MPEG-2 format TS output, is able to generate the necessary signals to verify the most common anomalies that can occur in Digital TV receivers. The system has an analogue external input of audio and video.

Multi-standard and multi-system analogue TV signals
Test Signal generation in MPEG-2, SPI or ASI format
The Test Signal contains valid audio and video programs
External analogue and digital audio / video inputs
Moving MPEG-2 video pattern generation
MPEG logos
RS-232 remote operation

TS GENERATION	MPEG-2 format, audio/video valid program
SOUND	Variable frequency for TV decoder verification
ANALOGUE TV	Multistandard and multisystem signal generation

Optiuni recomandate

Alte produse PROMAX

RECEPTOR CONVERTOR FIBRA OPTICA -> DVB-T RF PROMAX DT-620

• OPTICAL INPUT: From 1100 to 1600 nm
• RF OUTPUT: From 470 MHz to 862 MHz
• optical SC input and an RF type BNC output
• suitable for optical links up to 40 km away

SISTEM MONITORIZARE & DETECTIE & MASURA RADIO SI TV DIGITAL PROMAX PROWATCH DEIDE3

• Detection of radio signals received in a specific location, in the radio as well as in the digital and analogue television bands
• Identification of each one of the signals received
• Permanent monitoring of a variable area of the radio spectrum, carrying out an analysis of the detected variation
• digital radio (DAB), terrestrial digital television (TDT) according to the DVB-T (COFDM modulation) standard, FM-RDS radio and analogue TV signals

POWER-METRU FIBRA OPTICA PROMAX PROLITE-23

• 850, 1300, 1310, 1490, 1550 nm CALIBRATED WAVELENGTH
• Pocketsize, large LCD display, easy to use
• Measure six wavelengths through a single connector
• Direct loss measurements units in dB
• Absolute power measurement units in dBm and W (or µW)
• PC software available for testing data collection and report generation

MPEG-2 TRANSPORT STREAM RECORDER, PROCESSOR, PLAYER PROMAX TG-130

• integrated DVB-T tuner that allows the TS capture in real time
• record a transport stream continuously for several minutes and then play it back
• work in the field where maybe it is not possible to find electricity available
• ASI Transport Stream Input: Maximum data rate 40 Mb/s
• RF Input: DVB-T from 35 to 100 dBµV
• ASI & SPI parallel Transport Stream Output: Maximum data rate 32 Mb/s
• Storing Capacity: Memory card 4 GB, 20 minutes approx (20 Mbits/s)

SISTEM MONITORIZARE & CONTROL TV TERESTRIAL DVB-T/ DVB-H 6 CANALE PROMAX PROWATCH TELMO

• remote control and measuring of Digital Terrestrial Television (DTT)
• compact module, designed for an easy integration
• operating on its own, controlling the quality of service parameters for up to 6 multiplex
• Warning and Alarm that can activate switches

AMPLIFICATOR PUTERE RF DVB-T SEMNAL COFDM 1W 30DBM PROMAX DT-730

• FREQUENCY BANDS: UHF from 470 MHz ~ 862 MHz
• 1 W RF power amplifier for COFDM signals
• both for single carrier or multicarrier system
• provides an amplified output of 30 dBm (137 dBµV)
• preserves the original signal quality and maintains a low noise levels

SISTEM TRAINING RECORDER CASETE PROMAX EG-833

• Input section
• Recording process section
• Playback process section
• Output section
• Noise reduction systems: Dolby© B and C
• Control system

GENERATOR SEMNAL VIDEO CABLU CATV PURTATOARE 4 CANALE 5..900 MHZ PROMAX RP-200

• 4 channels handheld pilot generator 5..900 MHz Frequency Range
• direct frequency band (downstream) and return band (upstream) in CATV
• fully-configurable by the user
• frequency and level of each pilot can be set independently
• powered by rechargeable batteries

COMBINATOR DVB-T AMPLIFICATOR SEMNAL RF 22 DBM PROMAX TD-522

• designed to combine different RF (COFDM) signals in DVB-T format
• provides 46 dBm amplification and an output power of 130 dBµV (+22 dBm)
• to be assembled in a rack cabinet of 19 inches and 1U height
• FREQUENCY RANGE: 50 MHz to 860 MHz

SISTEM TRAINING DVD & CD PROMAX ED-845

• theoretical-practical study of a DVD & CD player
• observe the internal composition of the mechanics
• analyze the signals that take part of the operation
• simulate several faults for the study of troubleshooting and diagnostic methods