PROMAX MX-008 is a compact and cost-effective DVB MPEG-2 TS re-multiplexer which can multiplex up to 8 ASI transport streams and deliver 2 ASI output ports. The combination of PID-packet-exchanging based technology Service, PID filtering and re-multoplexing function, and 19" rack mountable chassis make it an ideal device for a wide range of re-multiplexing applications including cable and terrestrial regional head-ends.

Fully compliant with DVB ETSI 300421 standard
Processing of up to 8 SPTS or MPTS
8 ASI inputs, 2 ASI outputs
ASI input packet length 188/204 bytes Self-adapting
Output packet length 188/204 bytes optional
Output rate up to 216 Mbps
SI/PSI automatic regeneration or manual re-mapping
Service and PID packet filtering and re-multiplexing
Network remote control and software upgrade
Standard 19" rack 1U chassis installation

REAR PANEL RS-232 ETHERNET ASI1-ASI8 IN ASI1-ASI2 OUT Power cord socket	9-pin port for debug and software upgrade 10M/100M Base-T Ethernet for network remote control DVB-ASI Input ports DVB-ASI Output ports AC 90~260V, 50Hz/60Hz
DVB-ASI INPUT Connector Min Sensitivity Input Level Input Bit rate Data format Package length	8 x BNC female, 75 O 200mV 880mV 5 to 50Mbps Byte 188/204 bytes (self-adapting)
DVB-ASI OUTPUT Connector Output level Rise time Fall time Deterministic jitter Output Bit rate Data format Package length	2xBNC female, 75 O 800mV 1200ps 1200ps 10% 5 to 80Mbps Byte 188/204 bytes (selectable)

Optiuni recomandate

Alte produse PROMAX

RECEPTOR CONVERTOR FIBRA OPTICA -> DVB-T RF PROMAX DT-620

• OPTICAL INPUT: From 1100 to 1600 nm
• RF OUTPUT: From 470 MHz to 862 MHz
• optical SC input and an RF type BNC output
• suitable for optical links up to 40 km away

GENERATOR SEMNAL TEST TV CABLU COAXIAL CATV/ SMATV 5..2150 MHZ PROMAX RP-110

• CATV and SMATV coaxial cable bands
• six pilots of frequency and level selectable by the user
• 8 preset memories for the six pilot signals.
• Frequency resolution: 25 kHz.
• User interface in several languages.
• USB to PC connection for firmware updating and to configure frequencies and levels.

MPEG-2 TRANSPORT STREAM RECORDER, PROCESSOR, PLAYER PROMAX TG-140

• record a transport stream continuously for several hours up to 15 hours at 20 Mbps
• ASI transport stream Input, Maximum data rate 150 Mbps
• ASI transport stream Output, SPI parallel transport stream Output, Maximum data rate 90 Mbps
• Hard disk 160 GB Storage Capacity
• USB, Ethernet interface

KIT ACCESORII SUDURA FIBRA OPTICA PROMAX OP-040B

• - Kevlar scissors
• - Fibre disposal unit
• - Isopropyl alcohol cleaning wipes (x50)
• - Connector cleaner
• - SC/APC pre-polished connectors
• - Mechanical splicer
• - Mini Visual Laser Source
• - LED headlamp
• - Transport and storage suitcase

MODULATOR SFN/MFN DVB-ASI/ SPI -> DVB-T/ DVB-H PROMAX MO-180

• MPEG-2 TS INPUT: 2xDVB-ASI 75 ?, 1xDVB-SPI LVDS DB-25
• RF Output: 45 - 875 MHz
• CONTROL INTERFACE: Ethernet RJ-45 connector (SNMP compatible)
• 10 MHz GPS reference input

MODULATOR ASI-TS MPEG -> ISDB-T/TB PROMAX MO-370

• -T and ISDB-TB modulator contained in a 19" 1U chassis
• inputs can be used to modulate the COFDM signal
• TS MPEG INPUT: 2x ASI
• RF OUTPUT: 45-875 MHz (1 Hz steps), approx. 80 dBµV power

TRANSMODULATOR DVB-T -> DVB-T PROMAX DT-212

• RF INPUTS: 2 independent DVB-T inputs
• RF OUTPUT: 2 combined independent DVB-T multiplexes
• PID Filtering with Filtering Table up to 32 PID
• direct COFDM input that can be tuned to any multiplex
• ouput in the UHF band
• regenerate the quality of the multiplex when received from a noisy source
• change the input channel to another channel with total quality preservation

RECEPTOR PACHETE IP -> 4 X DVB-ASI TRANSPORT STREAM PROMAX DT-324

• IP INPUT: Ethernet 100/1000 Mbps. RJ45 connector
• TS OUTPUT: 4 x DVB-ASI. BNC Female connector, 75 ?
• Communication protocol: UDP or RTP/UDP communication protocol
• Transmision methode: MULTICAST / IGMP Version 2
• Payload: From 1 to 7 packets MPEG-2

COMBINER 4 X DVB-T -> 1 X DVB-T PROMAX DT-722

• FREQUENCY MARGIN: From 50 MHz (C-2) to 860 MHz (C-69)
• INPUTS: 4 inputs Female BNC, 75 ? impedance
• RF OUTPUT: 1 female BNC output, 75 ? impedance
• output designed to mix output RF signals of COFDM modulators and transmodulators with DTT channels

COMBINER 8 X DVB-T -> 1 X DVB-T PROMAX DT-710

• FREQUENCY MARGIN: From 50 MHz (C-2) to 860 MHz (C-69)
• INPUTS: 8 inputs Female BNC, 75 ? impedance
• RF OUTPUT: 1 female BNC output, 75 ? impedance
• output designed to mix output RF signals of COFDM modulators and transmodulators with DTT channels