MPEG-2 Transport Stream Recorder, Processor, Player Promax TG-130

• 1 - 50 MHz PLC Spectrum Analyser Propower-5
• 1 - 50 MHz PLC Noise Generator Propower-1
• field use and combined use
• st the network response to PLC test signals

 

• Attenuation test nd OLTS Functions
• LOSSES Function
• LOGGER Function
• Visual locator to find faults in the fibre
• Red laser at 650 nm with an universal connector
• User interface in several languages
• Connection USB to PC to transfer the data recorded by the instrument

 

• integrated DVB-T tuner that allows the TS capture in real time
• record a transport stream continuously for several minutes and then play it back
• work in the field where maybe it is not possible to find electricity available
• ASI Transport Stream Input: Maximum data rate 40 Mb/s
• RF Input: DVB-T from 35 to 100 dBµV
• ASI & SPI parallel Transport Stream Output: Maximum data rate 32 Mb/s
• Storing Capacity: Memory card 4 GB, 20 minutes approx (20 Mbits/s)

 

• Fully compliant with DVB ETSI 300421 standard
• Processing of up to 8 SPTS or MPTS
• 8 ASI inputs, 2 ASI outputs
• ASI input packet length 188/204 bytes Self-adapting
• Output rate up to 216 Mbps

 

• install, configure, adjust, modify and analyse any kind of actual MATV and SMATV installation
• high definition (HD) terrestrial television receiver and satellite television receiver is provided
• high definition and video compression (MPEG-2 and MPEG-4)
• DVB-S2, transmodulation, TDT Premium, IPTV, Fiber Optics, FTTx
• DTT signals propagation, Gap-Fillers, transport stream (TS) creation
• familiarity with PID, PMT NID
• configuration and testing of modulation parameters

 

• frequencies between 1 and 2200 MHz
• handheld broadband white gaussian noise generator
• testing coaxial networks

 

• theoretical-practical study of a DVD & CD player
• observe the internal composition of the mechanics
• analyze the signals that take part of the operation
• simulate several faults for the study of troubleshooting and diagnostic methods

 

• -T and ISDB-TB modulator contained in a 19" 1U chassis
• inputs can be used to modulate the COFDM signal
• TS MPEG INPUT: 2x ASI
• RF OUTPUT: 45-875 MHz (1 Hz steps), approx. 80 dBµV power

 

• INPUTS FOR EACH COMBINER: 4 BNC female inputs 75 ? (16 total)
• OUTPUTS FOR EACH COMBINER: 1 BNC female output 75 ? (4 total)
• allows many different combinations to adapt to the needs of each system as best as possible
• used to mix the output RF signals of the COFDM modulators and transmodulators
• preserves better the original quality and maintains lower noise levels

 

• MPEG-2 TS INPUT: 2xDVB-ASI 75 ?, 1xDVB-SPI LVDS DB-25
• RF Output: 45 - 875 MHz
• CONTROL INTERFACE: Ethernet RJ-45 connector (SNMP compatible)
• 10 MHz GPS reference input