• Variable insulation test voltage from 10 V to 100 V
• Insulation resistance from 2 GO to 20 GO
• Continuity testing at 200mA down to 0.01 O
• TRMS & DC Voltage measurement
• Frequency measurement 40 Hz to 400 Hz

The MIT40X insulation and continuity tester offers an easy-to-use products for those how have awkward insulation resistance measurement applications where a lower test voltage is needed. The MIT40X test voltage can be selected over a range from 10 V to 100 V. Applications include avionics, marine and other military applications, manufacturing, electrostatic measurement and component testing.

A key feature of the design of the tester is its waisted profile making it easily held by operators with the smallest of hands, and it can be used right or left-handed, just as easily.

There are other features that add to the convenience of operation including, a built-in stand, probe clips etc.

Accesorii standard

MIT400: basic CATIV 600 V with 250 V/500 V/1000 V insulation MIT400-EN

MIT410: as MIT400 + 50 V, 100 V, PI and DAR

MIT410-EN NSN:6625-99-354-2757

MIT415: 10 V, 25 V, 50 V, 100 V, 250 V, 500 V, PI and DAR 1000-351

MIT420: as MIT410 + result storage and recall + 200 GO

MIT420-EN NSN 6625-99-169-4728

MIT420-MIN: (NATO version - no batteries) 1000-309 NSN 6625-99-169-5675 MIT430: as MIT420 with Bluetooth download

MIT430-EN MIT40X: Special applications - selectable IT voltage 10-100 V MIT40X-EN

Included accessories

Hard case 5410-420

2 wire lead set to CAT IV 600 V, consisting of: Red and black leads, probes and clips with 1 x red long probe

Calibration certificate

SP5 Switched probe (not MIT400 or MIT40X) 1002-774

Owners information user guide CD

Optiuni recomandate

Optional accessories

Replacement 2 wire test lead set 1002-001

2 wire 500 mA fused test lead set 1002-015

Rubber boot with stand 6231-802

Pouch - test and carry case 2001-322

Alte produse MEGGER

TRUSA MONOFAZATA CURENT-TENSIUNE MEGGER SVERKER 750 780

• The engineer’s toolbox for all single phase relay testing!
• Stand-alone functionality
• Rugged and reliable for field use

PUNTE PENTRU MASURAT TANGENTA UNGHIULUI DE PIERDERI DIELECTRICE MEGGER DELTA4000

• fully automatic 12 kV insulation power factor / dissipation factor (tan delta) test set
• Voltage: 25 V to 12 kV, 1 V resolution
• Current : 0 to 5 Amps, 0.1 µA maximum resolution
• Capacitance: 0 to 100 µF, 0.01 pF maximum resolution
• Inductance: 6 H to 10 MH, 0.1 mH maximum resolution
• Power factor PF : 0-100% (0-1), 0.001% maximum resolution
• Dissipation factor DF : 0-100 (0-10,000%), 0.001% maximum resolution
• Watt Loss: 0 to 2 kW
• Automatic and manual operation
• Accurate and repeatable measurement results with high noise suppression
• Lightweight, rugged two-piece design

TESTER TDR LOCALIZARE DEFECTE CABLURI MEGGER TDR1000/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO set up for instant use.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature to allow comparison between cables.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.

TESTER DE TENSIUNE VOLTMETRU ELECTRICIAN MEGGER TPT420 CATIV 1000V

• CAT IV/1000 V
• Clasificare IP64
• 12 până la 1000 V AC
• 12 până la 1500 V DC
• Funcție de testare a continuității cu indicație vizuală și acustică
• Indicare tensiune fără baterii
• Test de tensiune unipolar
• Indicare rotație fază
• Lanterna integrată

ANALIZOR INTRERUPATOARE MONOFAZATE MEGGER EGIL

• Suitable for testing timing and travel on all circuit breakers with single interrupter per phase
• Extremely easy-to-use and reliable
• Two separate timing channels for measurement of auxiliary contacts
• Analog measurement channels for travel transducers or general voltage/current measurements
• Static and dynamic resistance measurements along with the SDRM201 accessory

MULTI-AMP CIRCUIT BREAKER TESTER RETROFIT MEGGER DDA16, DDA30 AND DDA60

• Drop-in retrofit capability to the Multi-Amp Model CB-9116, Model DB-8130 and Model CB-8160 circuit breaker test sets
• Digital Signal Processing (DSP) technology
• Variable pulse time and firing-angle output-current control
• Complies with NEMA AB-4 Test Guidelines

TESTER DE IZOLATIE SI CONTINUITATE CU ALARMA MEGGER - MIT200 SERIES

• Sunt disponibile doua sau trei tensiuni de test asigur½nd solutia ideala pentru majoritatea aplicatiilor din zona tensiunilor joase
• Masurarea rezistentei de izolatie p½na la 1000 M? pe toate domeniile
• Descarcarea automata ne asigura ca toate circuitele sunt descarcate sigur dupa ½ncheierea testelor
• Tensiunea de test a izolatiei de 1000 V are o avertizare de ½nalta tensiune ½nainte de a aplica tensiunea

LOCATOR SCURGERI LA PAMANT CURENTI DC IN SISTEME BATERII MEGGER BGFT 246100B

• Ground faults in ungrounded dc battery systems easily located
• Operates in high electrical noise environment
• Simplifies fault tracing by identifying fault characteristic (resistive and capacitive) magnitudes

TESTER MULTIFUNCTIONAL INSTALATII ELECTRICE JOASA TENSIUNE MEGGER MFT-X1

• Testează True Loop™ cu brevetatul Confidence Meter™
• Transferul rezultatelor prin Bluetooth® compatibil cu CertSuite™
• Noua generaţie a metodei de test a buclei fără declanșare, cu 2 şi 3 fire
• Sistem de operare actualizabil de către utilizator
• Test de buclă de înaltă rezoluţie de 0,001Ω

CIRCUIT BREAKER TESTER RETROFIT MEGGER ½ DDA1600

• Digital signal processing technology
• Variable firing angle and pulse duration
• Modular, portable design
• Complies with NEMA AB-4 Test Guidelines

Tester izolatie 100V si continuitate Megger MIT40XPRODUS OBSOLET ( * SCOS DIN UZ )

Tester izolatie 100V si continuitate Megger MIT40X
PRODUS OBSOLET ( * SCOS DIN UZ )