Augmenting Megger Ducter range of 10 A micro-ohmmeters, the DLRO10HDX combines ultimate simplicity of operation with a rugged IP65 case designed for stable ground and bench operation and provides memory storage.

These units are powered from either rechargeable battery or mains power making it suitable for continuous testing in production line/repetitive use environments.

Rotary switch controls are simple and easy to operate in all weather conditions and with gloved hands. A large, clear, backlit LCD display is easy to read from a distance. The DLRO10HDX provides significantly enhanced compliance and is capable of delivering 10 A into measurements up to 250 mOhm and 1 A into measurements up to 2.5 Ohm. The duration of each test may be up to 60 seconds.

The DLRO10HDX is rated CAT III 300 V provided the optional terminal cover is fitted to the instrument.

History of Ducter testing

For over 100 years the Ducter test has been used to describe a simple test for measuring very low contact resistances and Ducter, which is still used as a trade mark, was the name originally given to the low resistance ohmmeter manufactured by Megger. The name Ducter was registered by Megger in June 1908 and Ducter has since become the industry standard.

Features:

Onboard memory storage for test results up to 200 records (HDX only)
Download to PowerDB
Interchangeable test lead terminations
High or low output power selection for condition diagnosis
Operates from battery or AC mains supply
Protected to 600 V without blowing a fuse, test lead live voltage warning light
Heavy duty case: IP 65 lid closed, IP54 operational
Simple rotary switch selection of five test modes, including auto start on connection

Alte produse MEGGER

MICROOHMETRU 600A MEGGER DLRO600

• Small and weighs less than 33 lbs (15 kg)
• Test currents from 10 A to 600 A dc
• 0.1 µohms best resolution
• On board memory for up to 300 test results and notes
• RS232 port to download stored results or for real time output to a printer
• Supplied complete with 16.4 ft (5 m) test leads and download software

TESTER RELEE DE PROTECTIE TRIFAZATE MEGGER SMRT33

• Small, rugged, lightweight and powerful
• Operate with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power output - (45 Amps/300 VA rms) per phase
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS software

TESTER RELEE DE PROTECTIE MONOFAZATE MEGGER SMRT1

• Small, rugged, lightweight and powerful
• Operate with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power (75 Amps/400 VA rms)
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS software

TRUSA MASURA TANGENTA UNGHI DE PIERDERI TANGETA DELTA MEGGER DELTA4310

• fully automatic 12 kV insulation power factor / dissipation factor (tan delta) test set
• Voltage: 25 V to 12 kV, 1 V resolution
• Current : 0 to 5 Amps, 0.1 µA maximum resolution
• Capacitance: 0 to 100 µF, 0.01 pF maximum resolution
• Inductance: 6 H to 10 MH, 0.1 mH maximum resolution
• Power factor PF : 0-100% (0-1), 0.001% maximum resolution
• Dissipation factor DF : 0-100 (0-10,000%), 0.001% maximum resolution
• Watt Loss: 0 to 2 kW
• Automatic and manual operation
• Accurate and repeatable measurement results with high noise suppression
• Lightweight, rugged two-piece design

MEGOHMETRU REZISTENTA IZOLATIE 15KV MEGGER MIT1525/2

• Testare diagnostică cu suită completă de teste
• PI Predictor™ reduce timpul de testare la jumătate
• Testare precisă cu RE>Act™
• Stocare încorporată şi export ușor de date
• Conceput pentru testare sigură pe teren

TESTER CURENTI REZIDUALI RCD-URI MEGGER RCDT300 RCDT310 RCDT320 RCDT330

• Testează RCD-uri standard, CC, selective şi programabile
• Testarea rampei (RCDT320/330)
• Testarea automată (de la distanţă) (RCDT320/330)
• Siguranţă trifazată

TESTER UNIVERSAL ELECTRICIAN INSTALATII MEGGER MFT1800 MFT1825 MFT1815

• Testarea RCD de tip B şi a RCD trifazate pentru aplicaţii industriale fără împământare
• Testarea buclei fără declanșare cu două şi trei fire pentru circuite protejate de RCD
• Opţiuni de teste cu 3 poli, 3 poli cu tehnica tijei atașate, 2 poli şi fără ţăruşi pentru măsurarea rezistenţei electrodului de împământare
• Selecţie simplă a testelor codificate prin culori şi afișaj mare, clar, iluminat din spate pentru ușurinţă în utilizare
• Test de continuitate cu inversare automată a curenţilor de testare de 200 mA şi 15 mA la alegere

TRUSA TESTARE TRANSFORMATOARE SI STATII TRANSFORMARE CAPACITATE FACTOR DE PUTERE SI DISIPATIE MEGGER TRAX

• Înlocuiește nevoia mai multor seturi de testare
• Sistem puternic, portabil și compact
• Reduce timpul de instruire a utilizatorilor și de testare
• Extinde durata de viață a transformatoarelor de putere
• Testarea stării izolației la 1 Hz
• Gestionează și analizează datele de testare

DIGITAL CLAMP METER MEGGER - DCM310 AND DCM320

• Option of current only , DCM310 or multimeter, DCM320 models
• Measures up to 400 A a.c. with low current ranges for improved resolution
• 600 V a.c./d.c. DCM320
• 20 MO Resistance DCM320

TESTER TDR LOCALIZARE DEFECTE CABLURI MEGGER TDR1000/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO set up for instant use.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature to allow comparison between cables.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.