MI 3252 MicroOhm 100A is a portable low resistance ohmmeter used to measure low contact resistances of breakers and switches, busbars using test current from 100 mA to 100 A.

MEASURING FUNCTIONS

Resistance measurement: wide measuring range (1 nO ... 20 O) adjustable test current (100 mA ... 100 A)
Voltage drop measurement
Bar graph: on screen resistance bar graph

KEY FEATURES:

Safe: sustain external voltages in case of wrong connection, protection level (CAT IV, 50 V); automatically detects continuity in current circuit.
Single and continuous measuring mode.
Portable: rugged carrying case with a handle and lightweight design enable easy moving the instrument between sites.
High protection degree: IP 64.
Accurate: 1 nO best resolution with 0.25% accuracy.
Custom limits: the limits can be set for PASS or FAIL evaluation of test result.
Battery powered: the instrument enables measurements with 100 A for up to 10 minutes when powered from internal battery only.
Memory: built-in memory enables storage of up to 1000 test results.
Downloadable: downloads test results via RS232 or USB cable directly to the PC with the help of the software.

TECHNICAL DATA

Dimensions (w x h x l): 410 X 175 X 370 mm

Weight (with batteries, without accessories): 11.8 kg

Standard accessories

MI 3252 Standard set MI 3252

Instrument MI 3252 MicroOhm 100A
Current test lead with crocodile clip, 5 m, 25 mm², 2 pcs
Potential test lead, 5 m, 2 pcs (red, black)
Test probe, 2 pcs (red, black)
Crocodile clip, 2 pcs (red, black)
Mains cable
RS232 cable
USB cable
Bag for accessories
PC SW HVLink PRO
Instruction manual
Calibration certificate

More products METREL

POWER CURRENT CLAMP METER METREL MD 9240

• DC and TRMS AC voltage up to 600 V
• TRMS AC current measurement up to 1000 A
• Resistance measurement
• Continuity test
• Frequency measurement
• Contact temperature measurement
• Power factor
• Power (W, VA, Var)

METREL MI3311 GAMMAGT SAFETY ANALYZER FOR PORTABLE ELECTRICAL EQUIPMENT

• Continuity test with 200 mA.
• Insulation resistance.
• Insulation resistance of isolated accessible conductive parts.
• Substitute leakage current.
• Substitute leakage current of isolated. accessible conductive parts.
• IEC cord polarity test.
• Voltage.
• Functional and visual inspection.

INDUSTRIAL CURRENT CLAMP METER FOR GENERAL USE METREL MD 9230

• DC and TRMS AC voltage up to 600 V
• DC and TRMS AC current measurement up to 1000 A and 800 A respectively
• Resistance measurement
• Continuity test
• Diode test
• Capacitance measurement

RESIDENTIAL ELECTRICAL INSTALLATION SIMULATOR METREL MI 2166 DEMO

• Simulation of common electrical installation usually met in an individual house or apartment
• Various test methods supported by different test instruments can be presented.
• Acceptable or faulty parameters can be preset by five »fault� switches.
• Some real elements of electrical installation are placed on the front panel like RCD protection device, ON/OFF switch

LOW COST UNIVERSAL CURRENT CLAMP METER METREL MD 9210

• DC and AC voltage up to 600 V
• AC current measurement up to 600 A
• Resistance measurement
• Continuity test
• Diode test
• Frequency measurement
• Capacitance measurement

METREL MI3125B ELECTRICAL INSTALATION TESTER 1KV EUROTEST COMBO

• Insulation resistance with DC voltage
• Continuity of PE conductors with 200 mA test current with polarity change
• Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping
• Line impedance
• Loop impedance
• Loop impedance with Trip Lock RCD function
• TRMS voltage and frequency
• Phase sequence
• RCD testing (general and selective, type AC, A and B)
• Earth resistance (3-wire method).

METREL MI2077 TERAOHM INSULATION RESISTANCE MEGOHMMETER

• Adjustable test voltage from 250 V to 5000 V in 50 V steps.
• Resistance measuring range 5 T?.
• Adjustable measuring time from 1 second to 90 minutes.
• Automatic PI, DAR and DD index calculation and capacitance measurement up to 50µF.
• Automatic load discharge after completed measurement.
• Guard terminal for elimination of insulation surface currents.
• AC and DC voltage measurement up to 600 V.

METREL MI2088 EARTH INSULATION TESTER

• Measurements on earthing and lightning protection systems include: standard 4-wire method, standard 4-wire method with current clamps and 2-clamp method without junctions disassembling.
• Specific earth resistance (soil resistance).
• DC insulation resistance measurement with test voltages from 50 V up to 1000 V in 10 V steps. Measuring range up to 30 GOhm.

METREL MI3100 ELECTRICAL INSTALATION TESTER EUROTEST EASI

• DC insulation resistance,
• PE conductor continuity test,
• Line and Loop resistances with Fuse characteristics inside the instrument,
• RCD test with Trip lock function,
• phase sequence in 3-phase systems,
• on-line voltage monitor.

METREL MI3123 SMARTEC EARTH RESISTANCE TESTER

• Supports all types of earthing resistance measurements:
• - Standard earthing resistance measurement with spikes
• - Selective earthing resistance test with one current clamp
• - Selective (contactless) earthing resistance with two current clamps
• - Specific earth resistance measurement
• Leakage current tests with current clamps
• Load current tests with current clamps
• High accuracy, very high immunity against external noise
• Preprogrammed limits