ShinewayTech^@ TPM-50A Terminal Power meter can test (1) Average power range: -40 dBm~+20 dBm;(3) Modulation bandwidth: 5MHz;(3) Continuous signal and burst signal test. Highly accurate power measurement CW and digital modulated signal (For example: GSM/EDGE, CDMA/EV-DO, WCDMA/HSDPA, WiMAX, and TD-SCDMA). It is very important to test that if the transmitter is at a specified level or not. For example, the tester needs to test the output power of base station. Because the lower output power produces the larger coverage area to cause call interruption.

Features:

Measures 2G/3G /4G/ WiMAX wireless network, including GSM900/1800, CDMA800/1900, TD-SCDMA, WCDMA, CDMA2000, WLAN 2.4G & WiMAX or user-defined band
High-accuracy forward power, VSWR, Return Loss & load power measurement
Peak power and Peak/Average Ratio measurement
Burst power measurement
CW power measurement
Monitor function & test data saving
PC monitoring software and handheld monitor for result display
Standard N(Female) connector supports various transmission cable & antenna
USB interface

Alte produse SHINEWAY

SHINEWAY OLT-20 OPTICAL LOSS TESTER

• Pocketsize, large LCD display
• Multi-wavelength measurement
• Display units: dB/dBm/mW/?W
• Link loss testing

SHINEWAY MTP-200-OSA OPTICAL SPECTRUM ANALYZER / CHANNEL ANALYZER

• Channel power measurement
• Channel threshold detection
• In-band OSNR measurement

TESTER TELEFONIE RETEA FIBRA OPTICA SHINEWAY OTS-20/ OTS-30

• Full duplex multiparty call on single fiber
• Combines laser source and power meter
• High-quality voice signal
• Large internal memory: 4000 records
• PC software for data download and reporting

APARAT SUDURA FIBRA OPTICA SHINEWAY OFS-80

• 5.7" Turn-over LCD screen for clear display Both X and Y axis display
• Fiber core can be display clearly
• Inner light to set fiber in dark environment Auto check fiber end-face
• Auto calculate splicing loss
• 9 seconds splice time and selectable heating mode
• 3 hours fast recharge
• 60 preset/user-definable splicing programs

SET POWER METRU/ SURSA LUMINA LASER MASURA PIERDERI FIBRA OPTICA SHINEWAY OPM-50/ SLS-50

• OPM-50 Intelligent Optical Power Meter
• SLS-50 Intelligent Stabilized Laser Source
• Automatic Wavelength Identification
• Ideal for optical attenuation and loss measurements
• Continuity Verification and Fiber Link Evaluation

APARAT INSPECTIE CONEXIUNI FIBRA OPTICA SHINEWAY OCI-20A

• Eye-safe video viewing
• Inspect male and female connectors
• Various tips available
• Single-handed operation, quick focus
• Slim to access hard-to-reach connectors

POWER METRU RETEA FIBRA OPTICA PON SHINEWAY PPM-30

• Specially designed for FTTx/PON (B/E/G) applications
• Simultaneous Triple-play PON signals measurement: 1310/1490/1550nm (Voice/Data/Video)
• Pass/Warning/Fail assessment
• Pass-through test: Applicable anywhere on PON
• Optional Visible Fault Locator for macro bend detection and fiber identification
• Optional SM/MM Power Meter and Stabilized Laser Source

SURSA LASER SEMNAL OPTIC SHINEWAY MLS-20

• Multi-wavelength selectable: 650/850/1300/1310/1490/1550/1625 nm
• 650 nm visible laser source for break and macrobend detection
• Modulation in CW and modulated frequencies
• Modulation frequencies in 270,1K, 2KHz (1Hz@650nm)
• 1625nm laser source with optical power meter to measure upper limit loss in DWDM

ANALIZOR TRANSMISII DATE SDH/PDH/STM/E1 SHINEWAY DTA-SDH/155

• Analysis and evaluation of SDH and PDH networks andequipment up to 155Mbps.
• According to ITU.T G.821, G.826, G.828,G.829, M.2100, M.2101.
• Tandem Connection Monitoring (TCM) and APid tests.
• Support pointer adjustment test.
• Automatic Protection Switching (APS).
• Round trip delay measurement (STM-1 and E1).

KIT-URI INSTALARE, SERVICE, MENTENANTA FIBRA OPTICA SHINEWAY FTTX TESTPRO

• FTTx TestPro TK-FTP-102 Installation Stage-Enhanced Tool Kit
• FTTx TestPro TK-FTP-202 Service Activation Stage-Enhanced Tool Kit
• FTTx TestPro TK-FTP-302 Maintenance Stage-Enhanced Tool Kit