OPM-50 paired with SLS-50 Intelligent Stabilized Laser Source can be used to identify fiber, measure attenuation and loss, verify continuity and evaluate fiber link transmission quality.

Automatic Wavelength Identification

Compatible with the digital encryption protocols of SLS-50, OPM-50 can automatically identify the wavelength of the optical signals transmitted from SLS-50 and switch to the corresponding test mode, which greatly reduces the workload at both ends and avoids potential error.

Remote Reference Value Setting

OPM-50 can receive the power parameters of digital-encrypted signal transmitted from SLS-50 as reference for precise link loss measurement even the two units are far apart.

Internal Clock & Fiber S/N Editable

Internal clock enables OPM-50 to save test data with time and editable fiber SN information.

Compatible with FTTx Test

OPM-50 can be applied to measure Triple-play signals (1310nm, 1490nm and 1550nm) on Passive Optical Network (PON).

Features:

? Automatic wavelength identification (with SLS-50 Laser Source)

? Remote reference value setting

? FTTx applicable

? Internal clock & fiber S/N editable

? Memory of 1000 test records

? Data Transfer to PC via USB

? USB power charging

? No warm-up, quick start

? Backlight

? 70 hours continuous operation

? Pocketsize, lightweight and easy-to-use

? CE FCC certificates

Alte produse SHINEWAY

SHINEWAY MTP-200-CWDM SERIES HAND-HELD HIGH PERFORMANCE OTDR

• Up to 18CWDM wavelengths, customized
• Dynamic Range up to 36dB
• Short dead zone:EDZ 1m, ADZ 4m
• Auto/Manual test and analysis

ANALIZOR OTDR RETELE METROPOLITANE FIBRA OPTICA, ACCES SI FTTX SHINEWAY MTP-1000

• up to 3 functional modules, which is specially designed for FTTx/PON
• Flexible wavelength configurations to meet different requirements
• FTTX in-service testing
• PON OTDR identifies splitter and fiber-end
• 8.4 inch touch screen
• Fast power up with Windows CE
• Damp-dust-shock proof

SHINEWAY OVA-50 INTELLIGENT OPTICAL VARIABLE ATTENUATOR

• Network/BER testing
• Power meter calibration
• Link loss simulation
• Optical margin analysis

APARAT SUDAT FIBRA OPTICA SHINEWAY OFS-60

• 5" Turn-over TFT LCD screen for clear display
• Both X and Y axis display
• Fiber core can be display clearly
• 11seconds splice time and 30seconds heat time
• Portable design for field and Laboratory
• Simple Operation menu

SURSA LASER SEMNAL OPTIC SHINEWAY MLS-20

• Multi-wavelength selectable: 650/850/1300/1310/1490/1550/1625 nm
• 650 nm visible laser source for break and macrobend detection
• Modulation in CW and modulated frequencies
• Modulation frequencies in 270,1K, 2KHz (1Hz@650nm)
• 1625nm laser source with optical power meter to measure upper limit loss in DWDM

TESTER ETHERNET GIGABIT/BER SHINEWAY GET-100

• Electrical and optical ports with rate at 10/100/1000Mbps
• Ergonomic, creative design, and easy to carry
• IEEE 802.3, RFC1242, RFC2544 compliant
• L1/L2/L3 BER Test
• Full RFC2544 benchmark test
• Support VLAN test function
• Jitter Test

TESTER MASURA PIERDERI FIBRA OPTICA CU POWER-METRU SI SURSA LASER INTEGRATE SHINEWAY OTL-20/ OTM-20

• Support quick test, intelligentized operation
• Graphic interface, large easy to read LCD display
• Measurement units in dB, dBm and W (or mW)
• Large memory capacity (4000 measurements)
• Interchangeable fiber-optic adapters (FC, SC, ST, P/N, E 2000)
• RS-232 data upload port

SHINEWAY SPM-50 RF SPECTRUM POWER METER

• Power histogram or spectrum chart
• Preset frequency band for fast scan
• Live testing through feeder cable system

VERIFICATOR CANALE FIBRA OPTICA CWDM SHINEWAY OCC-50

• Clear TFT LCD display (320*240)
• 8-channel measurement (1471-1611 nm)
• Result display in histogram and list
• Data Transfer to PC via USB
• 10 hours continuous operation

SHINEWAY 95S FUSION SPLICER

• Auto and manual splicing
• Splicing=9s, heating=25s(time and power adjustable)
• Arc counter prompts electrode change upon usage
• Auto arc optimization