Calibrator portabil de bucla Fluke 705

Cod: Fluke 705


 

Brosura produs PDF, 0.53 Mb

Descriere

  • 0 to 28 V DC Voltage measure
  • 0 to 24 mA Current measure
  • 0 to 20 mA Current source / simulate
  • A large display and simple, pushbutton interface for ease of use
  • Simultaneous mA and % readout for quick, easy interpretation of readings
  • mA accuracy of 0.02%
  • Push button 25% steps for fast, easy linearity checks
  • "Span Check" for fast confirmation of zero and span
  • Selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests
  • 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM
  • Single 9V battery that is easily changed
  • 0 - 20 mA or 4 - 20 mA default start up modes
  • Safety conformance CSA C22.2 No. 1010.1:1992
 

Accesorii standard

  • AC70A Alligator Clips
  • C10 protective yellow holster with Flex-Stand™
  • Instruction sheet
  • TL75 safety-designed test lead set
  • NIST- traceable calibration report and data
 

Alte produse FLUKE

TERMOMETRU INFRAROSU CU CAMERA INTEGRATA FLUKE VT04

• Interval de masurare a temperaturii : -10 °C si +250 °C
• Precizie: ±2°C sau ±2%
• Frecventa de captura a imaginii : 8 Hz
• Banda spectrala infrarosu : între 6,5 µm si 14 µm
• Câmp de vizualizare 28° X 28°
• Suport de stocare Card Micro SD
• Alarma de monitorizare automata

 

FLUKE 438 II ANALIZOR MOTOARE SI CALITATE ENERGIE ELECTRICA

• Masurati parametrii cheie ai motoarelor cu conectare directa, inclusiv cuplul, turatia, puterea mecanica si randamentul motorului
• Masurati parametrii de putere electrica precum tensiunea, curentul, puterea, puterea aparenta, factorul de putere, distorsiunea armonica si dezechilibrul, pentru identificarea caracteristicilor care afecteaza randamentul motorului
• Identificati problemele de calitate a energiei precum caderile, vârfurile, fenomenele tranzitorii, armonicile si dezechilibrul

 

TESTER TENSIUNE SI CONTINUITATE FLUKE T100

• Display: 12 LED's
• Voltage test
• Optical and acoustical continuity test

 

INREGISTRATOR CALITATE TENSIUNE SI PUTERE FLUKE VR1710

• 70 V to 300 V Operating Voltage
• Fast and easy recording of voltage trends, dropouts, and power quality
• Continuous recording of all values with no gaps
• Flicker recording to EN 61000-4-15, individual harmonic and THD values
• Min, Max, and Average RMS values


RECORDER CALITATE PUTERE TRIFAZATA FLUKE TOPAS 1760/ 1760 BASIC

• 8 input channels
• Fully IEC 61000-4-30 Class-A standard compliant
• Power quality statistics according to EN50160, DISDIP tables, ITIC, CEBEMA, ANSI
• 10 MHz, 6000 Vpk waveform capture
• GPS time synchronization
• records rms, min, max values for: Voltage Current Power P, Q, S Power Factor kWh Flicker Unbalance Frequency Harmonics Interharmonics

 

FLUKE TIX500 CAMERA DE TERMOVIZIUNE 320X240

• Fluke TiX500 320x240 pixels, -20 °C..+650 °C
• Fluke TiX520 320x240 pixels, -20 °C..+850 °C
• Fluke TiX560 320x240 pixels, -20 °C..+1200 °C

 

CALIBRATOR PORTABIL DE BUCLA FLUKE 707EX

• 0 to 28 V DC Voltage measure
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• mA accuracy of 0.015%
• For use in explosion endangered areas ATEX certifed ( II 2 G Eex ia IIC T4)

 

MULTIMETRU DIGITAL PORTABIL CU DATA LOGGING 4.5 DIGIT FLUKE 289

• 4.5 digit large ¼ VGA display with white backlight
• 50,000 count
• 0.025% basic accuracy
• Logging function with TrendCapture
• Low input impedance function (LoZ)
• Motor winding and low ohm measurement range
• Low pass filter

 

TESTER INSTALATII ELECTRICE 50V-1000V FLUKE 1653B

• Test voltage: 50V, 250V, 500V, 1000V
• Two measurements at once and a dual display
• PEFC/PSC and loop impedance
• Fast voltage measurement between L-N, L-PE and N-PE
• PASS/FAIL indication for RCD test results
• Earth resistance

 

RLC-METRU 50 HZ..1 MHZ FLUKE 6306

• 50, 60, 100, 120 Hz 200 Hz to 100 kHz (100 Hz steps)
• 100 kHz to 1 MHz (1 kHz steps) test frequencies
• 0.1 % basic accuracy
• Easy to use, at-a-glance display