0 to 28 V DC Voltage measure
0 to 24 mA Current measure
0 to 20 mA Current source / simulate
mA accuracy of 0.015%, superior to other loop calibrators in this price range
Large display and simple, quick-click interface for easy one-handed operation
Simultaneous mA and % readout for quick, easy interpretation of readings
1 µA resolution for mA source, simulate and measure
Push button 25% steps for fast, easy linearity checks
0-100% "span check" for fast confirmation of zero and span
Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests
24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM
Single 9V battery that is easily changed without braking calibration seal
0 - 20 mA or 4 - 20 mA default start up modes
Innovative output adjustment dial with 1 µA and 100 resolution
HART ™ mode connects 250 O resistor in series with 24 V loop for compatibility with HART communicators

Accesorii standard

AC70A Alligator Clips
C10 protective yellow holster with Flex-Stand™
Instruction sheet
TL75 safety-designed test lead set
NIST- traceable calibration report and data

Alte produse FLUKE

POMPA PNEUMATICA CALIBRARE PRESIUNE FLUKE 700PTP-1

• Ideal for calibrating pressure transmitters, pressure switches and pressure gauges up to 600 PSI/40 bar
• Pump can be easily cleaned without disassembly
• The vernier can be used as a stand-alone low pressure calibration source
• Two pressure ports allowing simultaneous connection:
• ¼ -NPT female fitting for the reference gauge or pressure module
• ¼" NPT female fitting for the unit under test
• Adjustable stroke length can be set to limit the pressure per stroke

RLC-METRU 50 HZ..100 KHZ FLUKE 6304/ 6304C

• 50, 60, 100, 120 Hz, 200 Hz to 20 kHz (100 Hz steps), 100 kHz test frequencies
• 0.1 % basic accuracy (0.05 % for PM 6304C)
• Easy to use, at-a-glance display

TERMOMETRU INFRAROSU DE PRECIZIE FLUKE 574

• Backlit display for poorly lit areas
• Last ten temperature readings displayed on bar graph for easy reference
• Enhanced optics (distance to spot ratio up to 60:1) allow measurements of smaller objects from farther away
• Coaxial three-dot laser sighting system highlights the true diameter of measurement spots at all distances (90% energy)
• MIN/MAX measurements calculations instantly computed
• Audible and visible HI temperature alarm for instant recognition
• 100 temperature data logging capability for easy route review

MEGOHMETRU DIGITAL MULTIMETRU IZOLATIE 500/ 1000V FLUKE 1503

• Insulation test range: 0.1 MO to 2000 MO
• Insulation test voltages: 500 V, 1000 V

POMPA HIDRAULICA CALIBRARE PRESIUNI FLUKE 700HTP-2

• hand operated hydraulic pressure pump
• designed to generate calibration pressures up to 10,000 psi/690 bar
• Variable size stroke adjustment, allows the user to vary the volume and pressure per stroke
• Integral pressure adjustment vernier knob for fine pressure adjustment
• Directly connection to pressure modules consolidates two separate pieces into one when performing pressure calibration and testing
• Two ¼ inch NPT pressure ports, one for reference (pressure module or gauge), one for UUT
• Improved priming
• Improved stroke limiting mechanism

RLC-METRU 1 KHZ FLUKE 6303A

• 1 kHz test frequency
• 0.25% accuracy
• test signal level: 2V via 400O source

ANALIZOR PORTABIL CALITATE ENERGIE FLUKE 43B

• Power Quality Analyzer Measures power (W, VA, VAR) and power factor (PF, DPF)
• Oscilloscope Dual-channel scope 20 MHz bandwidth
• Multimeter
• Recorder
• Harmonics Up to 51st
• Power One and three phase

CALIBRATOR UNIVERSAL FLUKE 9100

• Calibrates over 15 different categories of general-purpose test equipment
• Options for power meter, insulation/continuity tester and oscilloscope calibration
• Semi-automated and fully automated procedure modes
• Fully supported by MET/CAL Plus software
• Intuitive front panel operation for ease of use

TESTER TENSIUNE SI CONTINUITATE FLUKE T120

• LED Bargraph
• Display: Fluke T120: 3½ digit LCD
• Voltage test
• Optical and acoustical continuity test

MULTIMETRU DIGITAL PORTABIL 3.5 DIGIT FLUKE 77IV

• 3.5 digit
• 6000 count resolution
• 0.3% basic accuracy
• Large display
• Backlight for work in dim areas