4.5 digit
20,000 count resolution for precise measurements
0.05% basic accuracy
True-rms ac voltage and current for accurate measurements on non linear signals
Selectable filter for accurate voltage and frequency measurements on motor drives
Built in thermometer lets you carry one less tool (TC probe included)
Measure up to 1000 V ac and dc
Measure up to 10 A, 20 A for up to 30 seconds
Frequency to 200 kHz and % duty cycle
Resistance, continuity and diode test
10,000 µF capacitance range for components and motor caps
Min/Max-Average recording with Min/Max Alert to capture variations automatically
Peak capture to record transients as fast as 250 µs
Relative mode to remove test lead interference from low ohms measurements
Auto and manual ranging for maximum flexibility
Touch Hold to capture stable readings avoiding noisy signals
Large display digits and two-level bright white backlight for increased visibility
Analog bargraph for fast changing or unstable signals
Input Alert provides audible warning against wrong use of input jacks
Improved selectable sleep mode for long battery life
Access door for fast battery changes without breaking the calibration seal
"Classic" design with new removable holster with built in test lead and probe storage
Lifetime warranty

Accesorii standard

TL75 test leads
AC72 alligator clips
yellow holster (H80M excl. TPAK)
80BK temperature probe
9 V battery (installed)
CD-ROM user’s manual and technical notes
operator’s guide

Alte produse FLUKE

CLESTE AMPERMETRIC DE CURENT TRUE-RMS 600A FLUKE 373

• 600 A AC current measurement with fixed jaw
• 600 V AC and DC voltage measurement
• True-rms ac voltage and current
• 6000 O resistance measurement
• 1000 µF capacitance measurement

CLESTE AMPERMETRIC DE CURENT 400A FLUKE 321

• Measures AC current to 400 A with 0.1 A resolution
• Measures AC volts to 600 V, with 0.1 V resolution to 400.0 V
• Resistance measurement to 400 O
• Precise measurements with 1.8% basic accuracy

CALIBRATOR UNIVERSAL FLUKE 9100

• Calibrates over 15 different categories of general-purpose test equipment
• Options for power meter, insulation/continuity tester and oscilloscope calibration
• Semi-automated and fully automated procedure modes
• Fully supported by MET/CAL Plus software
• Intuitive front panel operation for ease of use

ANALIZOR DE PUTERE DE PRECIZIE FLUKE NORMA 5000

• 3, 4 or 6 power phases
• Bandwidth from dc to 3 MHz / 10 MHz
• FFT analysis, vector diagram, and Digital Oscilloscope
• Voltage, current and power harmonics measured up to the 40th harmonic

TERMOMETRU INFRAROSU PENTRU INDUSTRIA ALIMENTARA FLUKE FOOD PRO

• Infrared temperature range from -35 to 275 �C
• HACCP check lights for instant recognition of safe/unsafe temperatures
• LED target illumination highlights the entire measurement spot for accurate targeting
• Hand washable (IP54 sealed)
• Probe temperature range -40 to 200 �C(Fluke Food Pro Plus)

MANOMETRU PRESIUNE FLUKE 700G DIGITAL DE PRECIZIE

• Precision pressure measurement from -20 mbar to 690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance

KIT MASURA CURENT AC LA DISTANTA CU CLESTE AMPERMETRIC FLUKE FLK-CNX A3000 KIT

• Masuratori de tensiune c.a. si c.c. true-RMS pâna la 1.000 V
• Curent c.a. ?i c.c. true-RMS cu rezolu?ia de 0,01 mA
• Masuratori de curent c.a. true-RMS la 400 A
• Înregistrare în memorie a pâna la 65.000 de masuratori
• CAT III 600 V; IP42

FLUKE 190-202 190-202/S OSCILOSCOP PORTABIL DIGITAL 2X200 MHZ

• 2-canale izolate 200MHz
• Clasa de protectie CAT III 1000 V, CAT IV 600 V
• Multimetru digital dedicat cu 5000 de numărări la modele cu două canale
• Măsurători automate avansate, energie (Vpwm, VA, W, PF) ™ timp (mAs, V/s, w/s)
• Clasa de protectie IP-51 pentru praf şi lichide pentru a rezista in medii dificile
• Porturi USB izolate

TERMOMETRU INFRAROSU FARA CONTACT FLUKE 572

• Backlit display for poorly lit areas
• Last ten temperature readings displayed on bar graph for easy reference
• Enhanced optics (distance to spot ratio up to 60:1) allow measurements of smaller objects from farther away
• Coaxial three-dot laser sighting system highlights the true diameter of measurement spots at all distances (90% energy)
• MIN/MAX measurements calculations instantly computed
• Audible and visible HI temperature alarm for instant recognition

TELEMETRU LASER PORTABIL 60M FLUKE 416D

• Ability to measure up to 60 m (200 ft) with increased accuracy of up to 1.5 mm (0.06 in)
• Measurement to 30 m (100 ft) with accuracy of 3 mm (0.12 in)
• Instant measurement with one-button operation.
• Easy targeting with bright laser.
• Quick calculation of area and volume.
• Easy addition and subtraction of measurements.