MO260 is a Combination Pin/Pinless Moisture Meter which measures Relative Moisture in wood and other building materials using pinless technology plus % of Moisture in sheetrock and other materials using the direct pin method. Measurements are displayed on a digital LCD with backlighting and a tri-color LED bargraph. Pinless non-invasive measurement depth to 0.75" (22mm) below the surface. Complete with 9V battery, replacement pins, protective cap, and pouch case.

Features:

%WME (wood moisture equivalent) pin moisture reading
Relative pinless moisture reading for non-invasive measurement
Digital LCD readout with backlighting feature and tri-color LED bargraph
Quickly indicates the moisture content of materials
Pinless measurement depth to 0.75" (22mm) below the surface
Electro-magnetic sensing technology
Built-in calibration check, Low battery indication
Complete with 9V battery, replacement pins, protective cap, and pouch case

Alte produse EXTECH

EXTECH 480400 TESTER SECVENTA FAZE

• Checks phase sequence and phase status
• Tests up to 600VAC and displays graphical phase orientation on the large LCD
• Double molded durable housing
• Easy to use alligator clips with wide jaws

EXTECH EMF300 TESTER SCAPARI MICORUNDE

• Ideal for measuring high frequency radiation levels emitted from household and commercial microwave ovens
• 0 to 1.999mW/cm² measurement range
• Audible alarm and overrange indicator
• Peak Hold
• Complete with 9V battery

EXTECH EN100 TESTER PARAMETRI MEDIU MULTIFUNTIONAL 11-IN-1

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off, Auto-rotating display depending on function
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

EXTECH ET15 TESTER PRIZA

• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

EXTECH LCR200 RLC-METRU PORTABIL

• Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)
• Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter
• Auto Select measurement function with 1kHz default test frequency
• Five test frequencies
• Set Hi/Lo limits using absolute values or percentage limits

EXTECH MG310 TESTER DIGITAL IZOLATIE

• Test Voltages of 250V, 500V, and 1000V
• Measure Insulation Resistance to 5.5GOhm (autoranging)
• AC Voltage measurement from 30 to 600V
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)

EXTECH 382100 ANALIZOR PUTERE 3 FAZE 1200A SI DATALOGGER

• Single phase, 3-phase/3-wire or 3-phase/4-wire systems
• Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1200A and Voltage measurements to 600V

DINAMOMETRU MASURARE FORTA CU DATALOGGING EXTECH 475040-SD

• Features 5000g, 176 oz. and 49 Newtons measurement capacity
• Large dual backlit LCD with reversible display feature to match viewing angle
• Record data on SD card
• Updates reading every 0.2 seconds and sample rate is 1 second to 9 hours
• Integrated load cell measurement transducer

EXTECH CB10: AC CIRCUIT BREAKER FINDER/RECEPTACLE TESTER

• Quickly locate 110V to 125VAC Circuit Breakers and Fuses
• Variable Sensitivity adjustment to pinpoint correct circuit breaker
• Bright Red and Green LEDs indicates if receptacle is correctly wired or six fault conditions
• Push button GFCI test
• Audible and visual circuit breaker indication

EXTECH EX350 MULTIMETRU TRUE RMS CU 11 FUNCTII

• True RMS for accurate AC measurements
• 4000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals