The Digital Line Analyser EDCT 2A is a handheld, battery operated, multi-function measuring instrument for in or out-of-service bit error and signal measurements. EDCT 2A can work in both unframed and framed modes for end-to-end and loopback testing of digital channels. It offers features such as: timeslot monitoring; timeslot access; set-ups and result storages.

Results can be stored in it's non-volatile memory or logged on PC via USB.

Main field of using:

- Installation of digital telecom circuits and services

- Long-term network monitoring

- Maintenance and troubleshooting

Features:

• 2048 kbit/s framed / unframed transmitter and receiver with through mode capability

• 2048 kbit/s slip measurement

• Interface parameters to ITU-T Rec. G.703

• Graphical displaying of signal pulse shape

• Jitter measurement

• PCM30, PCM30CRC, PCM31, PCM31CRC frame analysis

• nx64 kbit/s testing

• Line signal frequency measurement

• BER test to ITU-T Rec. G.821, G.826, M.2110, M2120

• CAS status analysis

• Auto-configuration function

• Storage of set-ups and results

• Voice channels monitoring through built in speaker

• External clock input

• Selectable English or Russian languages

• PC software for result storage

Accesorii standard

Results can be stored in it's non-volatile memory or logged on PC via USB.

Main field of using:

- Installation of digital telecom circuits and services

- Long-term network monitoring

- Maintenance and troubleshooting

Features:

• 2048 kbit/s framed / unframed transmitter and receiver with through mode capability

• 2048 kbit/s slip measurement

• Interface parameters to ITU-T Rec. G.703

• Graphical displaying of signal pulse shape

• Jitter measurement

• PCM30, PCM30CRC, PCM31, PCM31CRC frame analysis

• nx64 kbit/s testing

• Line signal frequency measurement

• BER test to ITU-T Rec. G.821, G.826, M.2110, M2120

• CAS status analysis

• Auto-configuration function

• Storage of set-ups and results

• Voice channels monitoring through built in speaker

• External clock input

• Selectable English or Russian languages

• PC software for result storage

Alte produse ELEKTRONIKA

TESTER NIVEL LINIE 2,4 MHZ LEVEL TEST SET ELEKTRONIKA ET91

• Psophometer
• Autmatic End to End Measurements
• High Resolution Spectrum Analyzer
• Measuring Bridge
• Memory Locations for Test Setups

ANALIZOR ISDN ELEKTRONIKA EIT10

• BRI TE and NT simulation, monitoring
• PRI TE and NT simulation, monitoring
• Dual U interface for troubleshooting between the NT and the Exchange
• B-channel voice and D-channel signaling monitor
• EDSS1, V5.1/V5.2, QSIG, SS7 protocols
• Analysis of CAS (R1,5; R2

PUNTE MASURA DETECTIE DEFECTE CABLU ELEKTRONIKA ECFL30

• Capacitance Measurements
• DC Fault Location Methods
• AC Fault Location Methods
• Graaf Fault Location Method
• TDR Measurements

TESTER TELEFONIE ELEKTRONIKA ETT 10

• Hand-held programmable instrument with microprocessor control
• Testing of subscriber lines, exchanges and telephone sets
• Hand-held programmable instrument with microprocessor control
• Ring generator for testing telephone sets
• Battery for feeding the telephone line with DC current

ANALIZOR LINII DATE TELEFONIE ELEKTRONIKA ELA10

• Service telephone facility
• Loop holding and dialing (pulse and DTMF) for dial-up circuit testing
• Acoustic pair detection facility
• AC-DC Voltage measurement
• Memory for phone numbers
• In-service talk/listen and voice monitoring

CALIFICATOR LINII XDSL XDSL ELEKTRONIKA ELQ2+

• TDR for fault location
• Load coil detection facility
• DC-AC bridge option
• 2.2 MHz frequency range for fix-frequency and spectrum measurements
• Longitudinal voltage protection

ANALIZOR SEMNALE TELECOMUNICATII ELEKTRONIKA ESA10

• External clock input
• 320 x 240 dot LCD display
• LED indicators showing settings and status of line signal
• Selectable English or Russian languages
• Internal rechargeable battery-pack
• USB interface to connect to PC

ANALIZOR DIGITAL LINII RETELE VOCE & DATE ELEKTRONIKA EDCT20

• PC software for analysis of signalling data and control
• Storage of set-ups and results
• Voice channels monitoring through built in speaker
• External clock input
• Selectable English or Russian languages
• LED indicators showing status of line signal

TESTER LINII DE DATE DIGITALE ELEKTRONIKA EDCT2A

• CAS status analysis
• Auto-configuration function
• Storage of set-ups and results
• Voice channels monitoring through built in speaker
• External clock input

TESTER RETEA LAN ELEKTRONIKA ELT10

• Simple, menu controlled operation
• Intelligent measurement port
• Storage of setups and results/statistics
• Results can be logged on PC via USB
• Software upgrade via USB