ELA 10 DATA LINE ANALYSER is a flexible and highly functional hand held instrument for analog testing in the range 20 Hz to 20 (85) kHz. Digital signal processing (DSP) technology delivers fast accurate results in a compact battery powered instrument ideal for field use. It is intended for the test of 2/4 W ordinary or special quality leased circuits and dial-up circuits. ELA 10 provides single sided and end-to-end measurements with two instruments in MASTERSLAVE arrangement. Just one person, thanks to the communication between the two instruments, can perform such measurements. Operation is made extremely simple by means of pre-defined automatic test sequences. ELA 10 can be programmed as MASTER and SLAVE as well. Tolerance masks of cable parameters and the principal system parameters are pre-programmed for ITU-T M.1020, M.1025 and M.1040 systems. When the automatic test sequence is ready ELA 10 provides an immediate PASS/FAIL indication by comparing the test results with the tolerance masks. Detailed test results are available in graphic and numeric forms. In case of FAIL indication the reason of failure is marked with asterisks. The test results can be stored in memory and transferred to PC for post processing or creating archive.

Features:

Comprehensive parametric testing in the frequency range 20 Hz to 20 kHz
Spectrum analyzer and out of band noise measurement up to 85 kHz
Measurements from ITU-T M.1020, M.1025, M.1030, M.1040, M.1050 and M.1060
Analogue-to-analogue measurements on PCM systems
Quasi analogue graph shows the measured results graphically
Simultaneous phase hit, gain hit, impulse noise, and interruption event counting
Interruption measurement with histogram display of results
Group delay distortion measurement
A range of accessories for signal balance, return loss, impedance and other measurements
Integral loudspeaker and microphone
Service telephone facility
Loop holding and dialing (pulse and DTMF) for dial-up circuit testing
Acoustic pair detection facility
AC-DC Voltage measurement
Memory for phone numbers
In-service talk/listen and voice monitoring

Alte produse ELEKTRONIKA

REFLECTOMETRU RETELE CABLU ELEKTRONIKA ETDR10A-1

• TDR for balanced cables
• Easy to operate
• Automatic detection of the fault
• Small size, suitable for using in the field at different weather conditions
• Widest range in a hand-held cable fault locator up to 16 km

ANALIZOR ISDN ELEKTRONIKA EIT10

• BRI TE and NT simulation, monitoring
• PRI TE and NT simulation, monitoring
• Dual U interface for troubleshooting between the NT and the Exchange
• B-channel voice and D-channel signaling monitor
• EDSS1, V5.1/V5.2, QSIG, SS7 protocols
• Analysis of CAS (R1,5; R2

SET TESTARE NIVEL 6 MHZ LEVEL TEST SET ELEKTRONIKA ET92

• Comfortable End to End Measurements
• High Resolution Spectrum Analyzer
• USB Ports for Result and Setup Transfer
• Memory for Test Setups

TESTER RETEA LAN ELEKTRONIKA ELT10

• Simple, menu controlled operation
• Intelligent measurement port
• Storage of setups and results/statistics
• Results can be logged on PC via USB
• Software upgrade via USB

ANALIZOR LINII DATE TELEFONIE ELEKTRONIKA ELA10

• Service telephone facility
• Loop holding and dialing (pulse and DTMF) for dial-up circuit testing
• Acoustic pair detection facility
• AC-DC Voltage measurement
• Memory for phone numbers
• In-service talk/listen and voice monitoring

CALIFICATOR LINII XDSL XDSL ELEKTRONIKA ELQ2+

• TDR for fault location
• Load coil detection facility
• DC-AC bridge option
• 2.2 MHz frequency range for fix-frequency and spectrum measurements
• Longitudinal voltage protection

ANALIZOR SEMNALE TELECOMUNICATII ELEKTRONIKA ESA10

• External clock input
• 320 x 240 dot LCD display
• LED indicators showing settings and status of line signal
• Selectable English or Russian languages
• Internal rechargeable battery-pack
• USB interface to connect to PC

CALIFICATOR RETELE CUPRU CABLU ELEKTRONIKA ELQ30A+

• Analogue measurements on leased or switched circuits 20 Hz to 20 kHz
• Analogue-to-analogue measurements on PCM systems
• Loop holding and dialling (pulse or DTMF) for dial-up circuit testing
• Built-in loudspeaker and microphone, service telephone
• In-service talk/listen and voice monitoring facility

ANALIZOR DIGITAL LINII RETELE VOCE & DATE ELEKTRONIKA EDCT20

• PC software for analysis of signalling data and control
• Storage of set-ups and results
• Voice channels monitoring through built in speaker
• External clock input
• Selectable English or Russian languages
• LED indicators showing status of line signal

TESTER TELEFONIE ELEKTRONIKA ETT 10

• Hand-held programmable instrument with microprocessor control
• Testing of subscriber lines, exchanges and telephone sets
• Hand-held programmable instrument with microprocessor control
• Ring generator for testing telephone sets
• Battery for feeding the telephone line with DC current