Sursa semnal TV frecvente fixe Deviser DS5103

• mainly applied for the installation of data service of HFC Network
• compatible with DOCSIS & Euro DOCSIS 1.1/2.0/3.0
• simple measurement of Analog TV, DVB-C and Spectrum
• 3.5 Inch TFT LCD
• USB storage and upgrade
• Toolbox - PC Management Software

 

• 100 kHz.. 3 GHz Frequency Range
• 50 or 75 ohm input impedance
• Design QAM analysis, spectrum analysis and CATV analysis in one unit
• QAM analysis
• CATV analysis
• Video Analysis Function
• Battery and AC power supply

 

• Analyze 18 wavelengths (ranging from 1271 ~ 1611nm) simultaneously
• All-day testing with 5 hours' continuous operation
• With interchangeable connectors, switch easily among FC / SC / LC / ST
• View measurement results in list or graph format
• Store up to 1000 data groups; manage them with Toolbox PC software

 

• Multi-wavelength output: 1310 & 1550nm, or 1310 & 1490 & 1550nm (depending on model)
• CW mode or modulated mode: 270Hz, 1kHz, 2kHz
• 30 hours working time

 

• Reduce test time with dual measurement display to make two measurements simultaneously
• Detect signal degradation and system performance over time with trace overlay
• Instant Pass/Fail status

 

• 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1610nm Wavelengths
• 0.01 dBm Resolution
• fber network installation, debugging and maintenance in optical network, CATV and FTTX field
• Up to 50 hours working time with 3 5AA rechargeable batteries
• Visual Fault Locator
• Auto shutdown and self-calibration function
• USB Interface and toolbox software

 

• Perform comprehensive spectrum and signal analysis for complete site profile and monitoring of signal environment
• Test MIMO 4x4 antenna performance
• Detect signal degradation and system performance over time with trace overlay

 

• E7000A: 25 MHz to 4400 MHz
• E7100A: 25 MHz to 6000 MHz
• Spectrum Analyzer Option 100kHz to 3000 MHz
• Return Loss/VSWR
• Cable Loss
• Distance-To-Fault
• 1-Port Phase
• Smith Chart
• 2-ports Transmission Measurements(With E7000-SA Option)
• USB Power Meter Sensor Option
• GPS Receiver Option

 

• Client-based Toolbox management software for quick unit configuration
• USB Micro 2.0 port for PC data transfer
• Ethernet port for Ping function
• Optical Power Measurement and VFL (Visual Fault Location) available by option

 

• Analog TV and SC-QAM: troubleshoot typical analog interference and distortions as well as SC-QAM performance
• Time-Domain EVS Measurements: uncover interference from LTE signals under downstream QAM carriers with no service interruptions
• Characterize OFDM carrier performance and DOCSIS 3.1 cable modem performance
• 7½ Capacitive Touchscreen: with excellent touch response and 7 hours of operating time