Antena RF banda larga logaritm periodica 680MHz..8GHz Aaronia HyperLOG 6080

• Frequency range: 10MHz to 6GHz
• DANL: -135dBm(1Hz)
• DANL with Preamp: -150dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Units: dBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm² etc.
• Demodulator: AM, FM

 

• Compatible with any Spectrum Analyzer brand
• Design: Directional Log Periodic
• Frequency range: 400MHz to 4GHz
• Max. input power: 100W AM (400MHz)
• 
• Nominal impedance: 50 Ohm
• VSWR: <1:2 (typ.)
• Gain: 4dBi (typ.)

 

• Frequency range: 10MHz to 8GHz
• DANL: -145dBm(1Hz)
• DANL with Preamp: -160dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 1kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM, PM

 

• Frequency range: 10MHz to 8GHz
• DANL: -145dBm(1Hz)
• DANL with Preamp: -160dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 1kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM, PM

 

• Compatible with any Spectrum Analyzer brand
• Design: ACTIVE directional Logarithmic-periodic
• Frequency range: 700MHz to 4GHz
• Nominal impedance: 50 Ohm
• VSWR: <1:2 (typ.)
• Gain: 44dBi (typ.)

 

• Compatible with any Spectrum Analyzer brand
• Design: Horn antenna
• Frequency range: 4GHz - 40GHz (usable & directional from 700MHz up, specific calibration data from 18GHz up)
• Max. input power: 300W (peak)
• Nominal impedance: 50 Ohm
• Gain: up to 17dBi

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (radial isotropic)
• Frequency range: 30MHz to 1GHz
• Max. input power: 5W AM (100MHz)
• Nominal impedance: 50 Ohm
• Gain: -18dBi (@100MHz)

 

• Spectran HF-80120 V5 (9kHz - 12GHz) Real-Time Handheld Spectrum Analyzer
• Frequency range: 9kHz to 12GHz
• Up to 175MHz Real-Time bandwidth
• POI below 1µS
• Real-time I/Q streaming via USB
• Very fast sweep mode, scans 20GHz in less than 20mS (in preparation)

 

• Frequency range: 100MHz to 4GHz
• Amplitude: -90dBm to 0dBm (typ.)
• Lowest sample time: 100mS
• Resolution (RBW): 100kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Pulse
• Input: 50 Ohm SMA RF-input (f)
• Interface: USB 2.0/1.1

 

• Compatible with any Spectrum Analyzer brand
• Design: Logarithmic Periodic Dipoles
• Frequency range: 700MHz to 2,5GHz
• Max. input power: 50W AM (800MHz)
• Nominal impedance: 50 Ohm
• VSWR: <1:2 (typ.)
• Gain: 4dBi (typ.)