Parameters		FNS-AX3-A16B	FNS-AX3-B50B
Output voltage		200 to 4800V
Pulse parameters at 50 ohm		Pulse rise time 5ns ±30%, Pulse width 50ns ±30% *1
Pulse parameters at 1k ohm		Pulse rise time 5ns ±30%, Pulse width 35 ns to 150 ns *1
Polarity		Positive, negative, polarity change burst by burst
Pulse frequency		0.1kHz to 2MHz *1
Burst duration		1 to 1000 pulses or continuous 1 pulse per 1ms burst period
Burst period		10 to 1000 ms ±10%, 10ms step
Continuous mode operation		10 KHz max (0.2 to 1kV)
Dynamic output impedance		50 ohms
Output connector		Coaxial (PULSE OUT)
Coupling/DC blocking capacitor		33nF/10nF
Frequency modulation		0 to -10% of setting
Timer (test duration)		1s to 9h 59m 59s 10 minutes max in the "continuous" and alternate polarity modes
External trigger		TL down edge Minimum trigger interval acceptable: 10ms
Burst timing	Non-synchronization	Irrelevant to EUT mains frequency
	Synchronization	Synchronizes with the EUT mains frequency 0 to 360 degrees ±10 degrees, 1 degree step Burst period: 50/60Hz
Internal CDN		85 to 240VAC 16A 50/60Hz 3-wire single-phase 125V DC/16A	85 to 500VAC 50A 50/60Hz 5-wire three-phase 125V DC/50A
Coupling line		L, N, PE	L1, L2, L3, N, PE
Coupling mode		Common mode
Dimensions (projection included)		(W) 320 x (D)352 x (H)400 mm
Character display		English, Chinese, Korean or Japanese
Weight		Approx. 14 kg	Approx. 19 k

*1 Pulse specifications guaranteed over 5KHz to 100KHz

Recommended options

More products NOISEKEN

PCB BOARDS RADIATION EMISSIONS MEASUREMENT SYSTEM NOISEKEN EPS-6000

• Measurable up to 8GHz in the frequency range
• 4 axes (X, Y, Z, ?) measurements with minute step minimum 0.1m realized
• Equivalent distance measurement to parts on PCBs even the heights are different
• Composite figure of photo of the measured PCB and the measurement data realized
• Rich magnetic field probes in the figures, sizes and Vertical/Horizontal directions
• Versatile display for the measurement data as 2 dimensions, 3 dimension, and equiangular line realized

VOLTAGE DIP AND SWELL WAVEFORMS SIMULATOR NOISEKEN VDS-2002

• Conforming to IEC 61000-4-11
• Fully compliant with all the test generator requirements of IEC standard.
• One unit solution for dip, swell, interruption and variation tests up to 16A 290V single phase AC
• Interruption test up to 16A 125V DC (*)
• Two motor-driven transformers approach enables switching between any voltages (*)
• Preset IEC test levels 0%/40%/70%/80% plus additional 120%

ESD ELECTROSTATIC DISCHARGE SIMULATOR FOR SEMICONDUCTOR CIRCUITS NOISEKEN ESS-6002/ 6008

• ESS-6002 Output voltage: 10V ~2.0kV ±10% (1V step)
• ESS-6008 Output voltage: 100V ~ 8.0 kV±10% (10V step)
• A simple probe stand and test fixture plus a pair of miniature test leads
• Narrow pitch DUT can be tested in semi-automatic manner
• Each probe has a coaxial interface with an external measuring instrument.

ESD ELECTROSTATIC DISCHARGE SIMULATOR NOISEKEN ESS-B3011/ESS-L1611

• ESS-B3011 : 0.2 to 30.0kV
• ESS-L1611 : 0.2 to 16.0kV
• EN/IEC 61000-4-2 Ed2 Compliant (B3011/L1611)
• ISO 10605 Ed2 Compliant (B3011/L1611)
• 3 pre-checking function taking the confirmable test into the account (B3011/L1611)
• Discharge detecting function to realize the air-discharge confirmation (B3011/L1611)
• Lightest Discharge Gun in the market to lighten the continuous operation (GT-30R)

RF EMISSION RADIATION PRECISION SCANNER NOISEKEN EPS-3007

• Provides an amplitude versus frequency plot for each antenna probe position and field intensity distribution map by a single scan
• Electric and magnetic fields are separately detected
• 3D graphical representation and zoom capability for a given area
• Comparison before and after a modification or improvement
• Scanning by a single antenna probe to minimize error between each measurement point
• 3GHz maximum frequency response (option)
• Standard included three kinds of antenna probes (Probe A, Probe B and Probe C)

IMPULSE NOISE SIMULATOR EMC TESTING NOISEKEN INS-4020/ 4040

• INS-4020 (2kV) : 0.01 ~ 2.00KV ±10% with 50 ohm load, 10V step
• INS-4040(4kV) : 0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step
• Automatic ramp operation for output voltage, phase angle and repetition period
• Floating output
• Coupling mode selection by plugging the supplied coaxial connector to the selected port
• Easily changeable mercury relay unit

HIGH VOLTAGE LIGHTING SURGE SIMULATOR NOISEKEN LSS-F02

• "Output voltage 15kV, current 7500A" which can conduct breakdown resistibility test
• "50% reduction of the output interval" which can drastically reduce the test time
• "Touch-panel" adopted for the easy test setting
• "Multi-languages" for the easy operation processing available
• "Indicator" which is linked with the test setting equipped
• PC control available with the optional software
• "Emergency stop" & "Interlock terminal" which secure the test operator equipped

FAST TRANSIENT BURST SIMULATOR NOISEKEN FNS-AX3

• 4.8kV maximum peak voltage
• 2MHz pulse repetition rate
• Conforming to IEC/EN 61000-4-4 (Second Edition-2004)
• Reverse polarity per burst
• Automatic ramp operation
• Manual, IEC level and sequence modes

PULSE 3A, 3B GENERATOR AUTOMOTIVE TRANSIENT SURGE SIMULATOR NOISEKEN ISS-7630

• Pulse 3a and Pulse 3b generating unit
• A built-in 60V/30A Coupling Network allows independent operation.
• <3.5ns rise time pulse available
• Runs in pulse repetition frequencies sweep mode from 1 kHz to 100 kHz (ISS-7601 software required)

ESD ELECTROSTATIC DISCHARGE SIMULATOR NOISEKEN ESS-2000AX

• 0.20kV~30.0kV Output voltage range
• Fully programmable menu-driven simulator providing three operation modes: IEC standard, Manual and Sequence
• 5.7-inch color LCD for easy setting and good visibility
• Unique shape for the operator's easy access to the controls and displays even when the unit is put on the floor level (ground plane)
• Communications with PC through the optic serial interface
• wide variety of the dedicated options