The NoiseKen's Impulse Noise Simulator INS-4020/4040 is a further development from our versatile INS series simulators for greater ease of use, durability and reliability with new technologies specifically applied to this new product. The most significant addition is automatic ramp operation in output voltage, pulse repetition period and phase angle placement.

INS-4020 (2kV) : 0.01 ~ 2.00KV ±10% with 50 ohm load, 10V step
INS-4040(4kV) : 0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step
Automatic ramp operation for output voltage, phase angle and repetition period
Floating output
Coupling mode selection by plugging the supplied coaxial connector to the selected port
Easily changeable mercury relay unit
Built-in 50 ohm terminator
Up to 5 test settings stored in the internal momory
Easily changeable outlet panels
CE marked

SPECIFICATIONS

Item		Model
		INS-4020 (2kV)	INS-4040(4kV)
Output voltage		0.01 ~ 2.00KV ±10% with 50 ohm load, 10V step	0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step
Polarity		Positive or negative
Square wave	Pulse width	50ns, 100 ns, 200ns, 250ns, 400ns, and any combination thereof, maximum width, 1µs or 10ns±3ns (the shortest connection)
	Pulse rise time	< 1ns
	Output impedance	50 ohm system (53.5 ohm)
Pulse repetition mode	VARIABLE	10ms ~ 999ms±10%, 1ms step	16ms ~ 999ms±10%, 1ms step
	PHASE	50 or 60Hz, Injection phase angle 0~359°, 1° step, synchronized with L1 - L2 power line frequency for EUT
	EXT	<EXT mode> >10ms, Pulse width>1ms TTL/Open collector negative logic	<EXT mode> >16ms, Pulse width>1ms TTL/Open collector negative logic
		Also functions for timing reference signals input from an external injection unit
	1 SHOT	Single pulse injection to the angle selected by PHASE setting, or irrelevant with the EUT line frequency
Memory		Up to 5 test settings
Power capacity of equipment under test		AC 240V, DC60V, Single phase, DC60V 16A
Power supply		AC100 ~ 240V 50/60H
Power consumption		140VA
Operating temperature and humidity		15~35°C / 25~75% (No dewing shall occur.)
Dimensions		(W) 430 X (H) 249 X (D) 420 mm(Projections excluded)
Weight		Approx. 19kgs

Standard accessories

Recommended options

More products NOISEKEN

PULSE 2B, 4 GENERATOR AUTOMOTIVE TRANSIENT SURGE SIMULATOR NOISEKEN BP4610

• Pulse 2b and Pulse 4 generating unit
• +-60V 10A DC - 150kHz built-In bipolar amplifier
• Functions as the DUT power supply for testing with the other pulses
• Upgradeable to 15A or 30A by use of an optional external power supply

ESD ELECTROSTATIC DISCHARGE SIMULATOR NOISEKEN ESS-B3011/ESS-L1611

• ESS-B3011 : 0.2 to 30.0kV
• ESS-L1611 : 0.2 to 16.0kV
• EN/IEC 61000-4-2 Ed2 Compliant (B3011/L1611)
• ISO 10605 Ed2 Compliant (B3011/L1611)
• 3 pre-checking function taking the confirmable test into the account (B3011/L1611)
• Discharge detecting function to realize the air-discharge confirmation (B3011/L1611)
• Lightest Discharge Gun in the market to lighten the continuous operation (GT-30R)

ESD ELECTROSTATIC DISCHARGE SIMULATOR NOISEKEN ESS-2000AX

• 0.20kV~30.0kV Output voltage range
• Fully programmable menu-driven simulator providing three operation modes: IEC standard, Manual and Sequence
• 5.7-inch color LCD for easy setting and good visibility
• Unique shape for the operator's easy access to the controls and displays even when the unit is put on the floor level (ground plane)
• Communications with PC through the optic serial interface
• wide variety of the dedicated options

IMPULSE NOISE SIMULATOR EMC TESTING NOISEKEN INS-4020/ 4040

• INS-4020 (2kV) : 0.01 ~ 2.00KV ±10% with 50 ohm load, 10V step
• INS-4040(4kV) : 0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step
• Automatic ramp operation for output voltage, phase angle and repetition period
• Floating output
• Coupling mode selection by plugging the supplied coaxial connector to the selected port
• Easily changeable mercury relay unit

PCB BOARDS RADIATION EMISSIONS MEASUREMENT SYSTEM NOISEKEN EPS-6000

• Measurable up to 8GHz in the frequency range
• 4 axes (X, Y, Z, ?) measurements with minute step minimum 0.1m realized
• Equivalent distance measurement to parts on PCBs even the heights are different
• Composite figure of photo of the measured PCB and the measurement data realized
• Rich magnetic field probes in the figures, sizes and Vertical/Horizontal directions
• Versatile display for the measurement data as 2 dimensions, 3 dimension, and equiangular line realized

ESD ELECTROSTATIC DISCHARGE SIMULATOR FOR SEMICONDUCTOR CIRCUITS NOISEKEN ESS-6002/ 6008

• ESS-6002 Output voltage: 10V ~2.0kV ±10% (1V step)
• ESS-6008 Output voltage: 100V ~ 8.0 kV±10% (10V step)
• A simple probe stand and test fixture plus a pair of miniature test leads
• Narrow pitch DUT can be tested in semi-automatic manner
• Each probe has a coaxial interface with an external measuring instrument.

VOLTAGE DIP AND SWELL WAVEFORMS SIMULATOR NOISEKEN VDS-2002

• Conforming to IEC 61000-4-11
• Fully compliant with all the test generator requirements of IEC standard.
• One unit solution for dip, swell, interruption and variation tests up to 16A 290V single phase AC
• Interruption test up to 16A 125V DC (*)
• Two motor-driven transformers approach enables switching between any voltages (*)
• Preset IEC test levels 0%/40%/70%/80% plus additional 120%

LIGHTING SURGE SIMULATOR NOISEKEN LSS-6230

• Lightning Surge Simulator conforming to IEC61000-4-5 ed2 Standard
• Ring wave conforming to ANSI/IEEE C62.45 available
• Max. voltage 6.6kV output focusing on the practical use
• Monitor terminal standard equipped so as for easy waveform pre-checking
• Interlock built-in as the emergency stop function for safety

SOURCE-VOLTAGE DIP AND SWELL SIMULATOR NOISEKEN VDS-1007/ 2007

• VDS-1007 : 1kVA Power
• VDS-2007 : 2kVA Power
• Enable to enrich EMC preliminary tests with the remote control as an AC stabilizing power source
• Enable IEC61000-4-11/13/14/28 precompliant tests
• Usable to be power source for IEC61000-3-2-2 precompliant measurement

FAST TRANSIENT BURST SIMULATOR NOISEKEN FNS-AX3

• 4.8kV maximum peak voltage
• 2MHz pulse repetition rate
• Conforming to IEC/EN 61000-4-4 (Second Edition-2004)
• Reverse polarity per burst
• Automatic ramp operation
• Manual, IEC level and sequence modes