Calibrare RLC | SAMAR

Brand: Samar

Rezistenta Etalon Standard de precizie utilizare in aer Samar RC-E 50

Cod: Samar RC-E 50

Brosura produs

PDF, 1.04 Mb

Descriere

STANDARD RESISTORS

On request various values and precision described below and boxes containing several values at your choice

Included certificate of calibration of our laboratory

Fixed value standard resistances

high-accuracy used as standard in laboratory.

SAMAR certificate of calibration is supplied with each standard resistor.

The standard production includes sample resistances multiple of 10.

Resistances realized in manganine with temperature coefficient of ± 20 ppm/°C (independent from temperature between 15 and 30 °C)
Long term stability: ± 50 ppm per year
Resistances from 0.0001? to 0.1? are 4 terminals, two potential and two current.
Resistances from 1? to 10M? are wrapped in an ant-inductive way and are two terminals with 2 screws for potential and current.

Type	Nominal Value O	Max Current in Air, A	Power dissipation in Air, W	Precision % t=20 ± 0,5 °C	Max deviation from nominal value t= 20 ± 0,5 °C
RC-E 50/00	0,0001	100	1	± 0,05	± 0,1
RC-E 50/0	0,001	30	1	± 0,01	± 0,05
RC-E 50/1	0,01	10	1	± 0,01	± 0,05
RC-E 50/2	0,1	3	1	± 0,01	± 0,05
RC-E 50/3	1	1	1	±0,01	± 0,05
RC-E 50/4	10	0,3	1	± 0,01	± 0,05
RC-E 50/5	100	0,1	1	± 0,01	± 0,05
RC-E 50/6	1.000	0,03	1	± 0,01	± 0,05
RC-E 50/7	10.000	0,01	1	± 0,01	± 0,05
RC-E 50/8	100.000	0,003	1	± 0,01	± 0,05
RC-E 50/9	1.000.000	0,001	1	± 0,01	± 0,05
RC-E 50/10	10.000.000	V_max=500V	V_max=500V	± 0,01	± 0,05

Alte produse SAMAR

Brand: Samar

CAPACITOR STANDARD DE VALOARE FIXA SAMAR CC-E50

• Values from 1nF to 1µF
• ON REQUEST DIFFERENT VALUES FROM THE ONES SHOWN
• Nominal voltage : 500Vdc
• Temperature coefficient: - (100 ± 50) x 10-6 /°C
• Test voltage: 2,000Vdc
• Insulation resistance: 500,000 MW
• Precision: ± 0.5 % at 1,000 Hz, between terminals

Brand: Samar

INDUCTANTA ETALON DE PRECIZIE PENTRU LABORATOR CALIBRARE SAMAR IC

• Values from 1mH to 1H
• Inductances of precision used as standard in laboratory
• SAMAR certificate of calibration is supplied with each standard inductor.
• Precision: ± 0.1 % at 1,000 Hz, between terminals
• ON REQUEST DIFFERENT VALUES FROM THE ONES SHOWN

Brand: Samar

DECADA REZISTENTE DE PRECIZIE SAMAR CR-E

• DECADES BOXES OF RESISTANCE with switch precision 0.1% at terminals
• Calibration precision: ± 0.02 %
• The precision shown refers to the terminals and therefore is total resistance included the resistance of zero
• Resistors are in manganine wire (temperature coefficient ± 10 ppm/°C) wrapped in ant-inductive way.
• Thanks to an opportune seasoning process the long term stability is ensured: : 10 ppm in the first year and max. 20 ppm in three years

Brand: Samar

REFERINTA STANDARD DE TENSIUNE FIXA DE PRECIZIE PENTRU CALIBRARE SAMAR SC51/SC52

• REFERENCES DC VOLTAGE STANDARD
• certificate of calibration of our laboratory
• DC voltage reference standard providing standard cell accuracy for use in measuring laboratories.
• Nominal e.m.f.: 1.01865 calibration 5°/ 6° decimal digits
• Precision: ± 50 µV / ± 25 µV
• max output current: 1 mA continuative
• stability: < 10 ppm/month with working temperature 15 - 25 °C and relative
• humidity 45-85%

Brand: Samar

CASETA REZISTENTE IN TREPTE DIVIZOR DE TENSIUNE SI POTENTIAL SAMAR CRC/1

• Used as a potential divider or for calibration (for example insulation tester)
• Chemical resistances of high stability, with dissipation 1W
• Precision 1% dc and ac up to 1 MHz. (on request execution at 0.1% )
• Range: 0 to 500M? with terminals for the following values:
• 0.5 - 1 - 2 - 3 - 4 - 5 - 10 - 20 -30 - 40 - 50 - 100 - 200 - 300 - 400 - 500 K?
• 1 - 2 - 3 - 4 - 5 - 10 - 20 -30 - 40 - 50 - 100 - 200 - 300 - 400 - 500 M?
• Execution in reading-desk metal case.

Brand: Samar

REZISTENTA ETALON STANDARD DE PRECIZIE UTILIZARE IN AER SAMAR RC-E 50

• On request various values and precision
• Long term stability: ± 50 ppm per year
• Resistances from 0.0001? to 0.1? are 4 terminals, two potential and two current.
• Resistances from 1? to 10M? are wrapped in an ant-inductive way and are two terminals with 2 screws for potential and current
• Included certificate of calibration of our laboratory
• high-accuracy used as standard in laboratory.

Brand: Samar

CAPACITATE ETALON DE PRECIZIE PENTRU LABORATOR CALIBRARE SAMAR CC

• Values from 1nF to 1µF
• ON REQUEST DIFFERENT VALUES FROM THE ONES SHOWN
• Nominal voltage: 500Vdc
• Temperature coefficient: - (100 ± 50) x 10-6 /°C
• Test voltage: 2,000Vdc
• Insulation resistance: 500,000 MW
• Precision ± 0.1 % at 1,000 Hz, between terminals

Brand: Samar

REZISTOR ETALON STANDARD REZISTENTE MARI SI INALTA TENSIUNE SAMAR RC80/M

• On request various values and precision
• Nominal Values: 10MO..100TO
• Nominal Voltage 500V
• Included certificate of calibration of our laboratory

Brand: Samar

INDUCTOR STANDARD PENTRU LABORATOARE CALIBRARE SAMAR IC-E50

• Values from 1mH to 1H
• Inductances of precision used as standard in laboratory
• SAMAR certificate of calibration is supplied with each standard inductor.
• Precision: ± 0.5 % at 1,000 Hz, between terminals
• ON REQUEST DIFFERENT VALUES FROM THE ONES SHOWN

Brand: Samar

PUNTE DE MASURA WHEATSTONE THOMSON MAXWELL DE SAUTY SCHERING

• DC / AC BRIDGES
• THOMSON - WHEATSTONE BRIDGE
• MAXWELL - DE SAUTY BRIDGE 50Hz
• SCHERING BRIDGE