The SDRM202 is an accessory for TM1800 and TM1700. SDRM202 can be used with EGIL equipped with the SDRM option and CABA Win version R03A or higher, however the single channel SDRM201 is recommended.

The SDRM202 is intended to use for both static and dynamic resistance measurements (SRM and DRM) on high voltage circuit breakers or other low resistive devices. Used together with TM1800 and TM1700 the current and also the voltage-drop across the circuit breaker contacts are measured. The measuring unit can thus calculate the resistance as a function of time.

An SDRM202 unit includes current cables and an SDRM Cable which comes in three versions, for TM1800 and TM1700 and EGIL respectively. The SDRM Cable is a small box with integrated cables for connection to the SDRM202 and to TM1800, TM1700 or EGIL.

Features:

Enables resistance measurement on circuit breakers
Small and light weight
A number of operations can be run with short waiting intervals

Alte produse MEGGER

ANALIZOR TRIFAZAT CALITATE ENERGIE SI PUTERE CLASA A MEGGER MPQ2000

• Alimentat de la tensiunea fazei A AC/DC
• Rezistent la intemperii conform standardului IP54 pentru utilizare în orice mediu
• Interval 1000 VAC şi 1500 VDC
• Auto CT identifică curentul la care este conectat instrumentul şi intervalul în care se află
• Oscilloscop şi DVM în timp real
• Conformitate IEC61000-4-30 Clasa A

SMART PRIMARY INJECTION TEST SYSTEM MEGGER SPI225

• Up to 2000A output
• Smallest primary injection test system in its class
• First unit on the market to eliminate variac control
• Output current regulation
• Designed for switchgear commissioning, circuit breaker, CT commissioning, ground grid and relay testing
• Software includes thousands of circuit breaker TCC curves

SINGLE PHASE HAND CRANKED TRANSFORMER TURNS RATIO TESTER MEGGER - TTR550005B

• Used for testing single phase power and distribution transformers
• Design based on precision bridge measuring technique
• Unmatched accuracy (½0.1%) in a portable design

TRUSA ELECTRICIAN INSTALATII ELECTRICE MEGGER MTK310 MTK320 MTK330

• Three kit options available: Insulation, continuity, earth loop, RCD testing
• MTK310: Standard electrical test kit
• MTK320: Advanced electrical test kit
• MTK330: Result storage and downloading test kit
• Rubber armoured instruments
• Weatherproof IP54
• Test leads included
• Calibration certificates included
• 3 year warranty

TESTER DE RELEE CONFORM IEC 61850 MEGGER GOOSER

• Reliable testing of IEC61850 relays using a conventional relay test set
• Separate Ethernet ports for the substation LAN and the controlling PC forming a Safe Substation Bus Access Point
• Seamless interaction between SCL GOOSE and GOOSE "sniffing"
• GOOSE merge - SCL GOOSE vs captured GOOSE for network troubleshooting and SCD file validation at FAT
• Stand alone functionality - Download a configuration and run

KARL FISCHER MOISTURE IN OIL TEST SETS MEGGER ½ KF875 AND KF-LAB MKII

• Coulometric Karl Fischer titrimetry
• KF875 optimized for insulating oil with an SG of 0.875, completely portable
• KF-LAB MkII offers greater flexibility, versatility and sample data input than the KF875; also completely portable
• KF-LAB MkII analyzes materials with an SG between 0.6 & 1.4, plus insulating oils with an SG of 0.875

MULTIFUNCTION INSTALLATION TESTERS MEGGER - MFT1735

• Two and three wire non-trip loop testing for RCD protected circuits
• Type-B RCD and 3-phase RCD testing for industrial applications with no Earth
• 3-terminal earth test and stakeless testing for earth electrode resistance measurement **
• Internal memory and Bluetooth® communications

TRUSA TRIFAZATA DE VERIFICARE RELEE DE PROTECTIE MEGGER SVERKER900

• The toolbox for substation 3-phase testing
• Three currents and four voltages
• Stand-alone functionality
• Rugged and reliable for field use
• Generation of 900 V and 105 A in single phase mode
• Secondary and primary testing

MICROHMMETRU 10A MEGGER DLRO10HD

• High or low output power selection for condition diagnosis
• Rechargeable battery or line power supply, continuous operation, even with dead battery
• 10 A for 60 seconds, less time waiting to cool, great for charging inductance
• High input protection to 600 V, inadvertent connection to line or UPS voltage will not blow a fuse
• Heavy duty case: IP 65 lid closed, IP54 operational (battery operation only)
• Rotary switch selects one of five test modes, including auto start on connection, giving ease of use

CURRENT SUPPLY UNIT MEGGER ½ CSU600A AND CSU600AT

• Compact and rugged
• Quick and easy to us
• Broad application range
• Excellent weight/performance ratio