Politici de confidentialitate

Date GDPR Termeni utilizare Politica cookies Confidentialitate Livrare si plata Cum comanzi?
Accept conditiile de utilizare Continua
 
office@distek.ro  +40 760952425   Cere ofertă (0) 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


Punte pentru masurat tangenta unghiului de pierderi dielectrice Megger DELTA4000

Cod: Megger DELTA4000 DELTA4110 DELTA-4000


 
Brosura produs PDF, 0.71 Mb
         

Descriere

• Power factor test set
• Automatic and manual operation
• Accurate and repeatable measurement results with high noise suppression
• Lightweight, rugged two-piece design
• New built-in intelligent temperature correction
• New automatic voltage dependence detection

 
 
  • Voltage: 25 V to 12 kV, 1 V resolution
  • Current : 0 to 5 Amps, 0.1 µA maximum resolution
  • Capacitance: 0 to 100 µF, 0.01 pF maximum resolution
  • Inductance: 6 H to 10 MH, 0.1 mH maximum resolution
  • Power factor PF : 0-100% (0-1), 0.001% maximum resolution
  • Dissipation factor DF : 0-100 (0-10,000%), 0.001% maximum resolution
  • Watt Loss: 0 to 2 kW, actual power, 0 to 100 kW when corrected to 10 kV
  • equivalent, 0.1 mW maximum resolution
 

DELTA4000 series is a fully automatic 12 kV insulation power factor / dissipation factor (tan delta) test set designed for condition assessment of electrical insulation in high voltage apparatus such as transformers, bushings, circuit breakers, cables, lightning arresters, and rotating machinery.

Two configurations make up the Series:

• DELTA4110 with external computer (not included) consists of the DELTA4100 control unit and DELTA4010 high-voltage unit

• DELTA4310 comes with onboard computer and consists of DELTA4300 control unit and DELTA4010 high-voltage unit

 

Accesorii standard

DELTA4110 Insulation Diagnostic System

(DELTA4100 control unit and DELTA4010 HV unit) DELTA4110

 

DELTA4310 Insulation Diagnostic System with onboard computer

(DELTA4300 control unit and DELTA4010 HV unit) DELTA4310

 

Included Accessories

High voltage lead: 21 m (70 ft), double shielded 30012-11

Measurement lead, color-coded red 25572-1

Measurement lead, color-coded blue 25572-2

Ground lead: 9 m (30 ft) 2002-131

Input power cable 25A EU 17032-23

Input power cable 16A US 17032-20

Input power cable 16A UK 17032-21

Input power cable 16A no plug 17032-22

Safety hand switch, Interlock #1: 18 m (60 ft) 1001-850

Safety hand switch, Interlock #2: 2.5 m (8 ft) 1001-851

HV unit power cable, 1 m (3 ft) 2002-132

HV unit control cable, 1 m (3 ft) 2002-133

Ground lead cable, 1 m (3 ft) 2002-134

USB cable, 2 m (7 ft) CA-USB

Ethernet cable, CAT 5, 2 m (7 ft) 36798

Soft padded carrying case for control unit [1] 2001-766

Soft padded carrying case for HV unit [1] 2001-766

Soft case for HV cable 2001-507

Soft case for other cables/accessories 2001-506

User manual 81331

Application guide 81332

Warranty [1 year]

PowerDB Advanced software

 

 

Optiuni recomandate

Optional Software

PowerDB Pro software, on USB dongle DB1001S-A

PowerDB Pro software, via soft key DB1001-A

 

Extended Warranty and Annual Support

Priority Access annual support plan D4K-P-ACCESS

Product warranty Y12-WARRANTY

Training D4K-TRAINING

PowerDB software

maintenance and upgrades D4K-SOFTWARE

24/7 technical support D4K-TECHSUPPORT

Engineering consulting and

results analysis D4K-ENGCONSULT

Loaner unit and accessories D4K-LOANER

 

 

Optional Accessories

Safety foot switch 1001-852

External strobe Y37181

External strobe extension cable, 18 m (60 ft) 1001-853

Transport case, 2-piece design kit, consists of: 1001-932

case for control unit and accessories (2001-746),

case for HV unit and accessories (2001-746)

Transport case, 3-piece design kit, consists of: 1001-933

case for control unit (2001-791),

case for HV unit (2001-791),

case for accessories ( 2001-792)

Transport cart / trolley 1001-530

Calibration box set for CAL4000 2002-137

Calibration standard 670500-1

Transit cases for calibration standard 670635

HV TTR capacitor, single phase (10 nF, 10 kV) 36610

HV reference capacitor (100 pF, 10 kV) 36610-1

HV reference capacitor (1000 pF, 10 kV) 36610-2

Carry case for capacitors 36610-CC

Capacitor kit (TTR cap, 2 ref caps, carry case) 36610-KIT2

Resonating inductor 670600-1

Thermal Pentax® printer, 120 V 36493-1

Thermal Pentax® printer, 240 V 36494-1-KIT

Thermal paper (8.5" x 11") for printer 36809-1

Thermal paper (A4) for printer 36809-2

Oil test cell 670511

Hot collar belts [3] 670505

Bushing tap connectors [2] 670506

External temperature and humidity probes 2002-138

USB bar code wand and software 36528

 

Accessory kit: hot collar straps [3], external temperature

and humidity meters, .75" bushing tap connector [1],

1" bushing tap connector [1], mini bushing tap

connectors [2], "J" probe bushing tap connector [1],

1 m (3 ft) non-insulating shorting lead [3],

2 m (6 ft) non-insulating shorting lead [3] 670501

Special length cables available upon request Consult factory

 

Additional Transformer Test Products

Leakage Reactance MLR

Turns Ratio, 3-phase TTR

Winding Resistance MTO

Sweep Frequency Response Analysis (SFRA) FRAX

Dielectric Frequency Response (DFR) and

moisture assessment IDAX

DC Insulation MIT/S1

Current Transformer Measurements MCT

 

Alte produse MEGGER

TESTER RAPORT TRANSFORMARE, DEPLASARE FAZA, REZISTENTA INFASURARE TRANSFORMATOARE MEGGER TTR100

• Tests turns ratio, phase displacement, excitation current, vector group, winding resistance and polarity
• Fully automatic; fast; easy-to-use; handheld; robust; lightweight
• Battery powered with power-saving and shutdown function
• Alphanumeric keyboard
• RS232 for data transfer and printing
• Stores 200 test results and 100 user-defined transformer test settings

 
ANALIZOR TRIFAZAT CALITATE ENERGIE SI PUTERE CLASA A MEGGER MPQ2000

• Alimentat de la tensiunea fazei A AC/DC
• Rezistent la intemperii conform standardului IP54 pentru utilizare în orice mediu
• Interval 1000 VAC şi 1500 VDC
• Auto CT identifică curentul la care este conectat instrumentul şi intervalul în care se află
• Oscilloscop şi DVM în timp real
• Conformitate IEC61000-4-30 Clasa A

 
TRUSA COMPLEXA PENTRU VERIFICAREA RELEELOR DE PROTECTIE MEGGER FREJA 400

• FREJA 403 3x60 A at 300 VA per phase.
• FREJA 406 Up to 6 channels: 3 x 60 A and 3 x 15 A
• FREJA 409 Up to 9 channels: 6 x 60 A and 3 x 15 A
• Voltage outputs : Up to four channels 300 V at 150 VA
• Fully automated testing using FREJA Win software
• PC operated or stand alone using the intuitive graphic touch screen
• High current, high power output (60 A / 300 VArms) per phase
• FREJA 409 provides 3 x 120 A in threephase configuration mode
• FREJA 406 provides 6 currents, and FREJA 409 provides 9 currents for transformer differential testing
• IEC 61850 test capabilities

 
OHMMETRU INFASURARI BOBINAJ TRANFORMATOR MEGGER MTO300 MTO330

• Automated 8-terminal/6-winding measurement capability
• Simultaneous winding magnetization
• Tests operation of on-load tap-changers
• Built-in auto-demagnetization feature
• Automatic discharge
• Power DB software (MTO330)

 
MICRO-OHMMETER MEGGER MOM690A

• Easy-to-use
• Automatic range settings
• MOM Win PC software

 
SARCINA TESTARE DESCARCARE BATERII UPS-URI MEGGER TORKEL-840 TORKEL-860 BS-49094 BS-49096

• used for battery systems ranging from 12 to 250 V
• Batteries can be tested "in service"
• Unit adjusts to include load currents in the test parameters
• User adjustable alarm and shutdown points to avoid excessive discharge
• Easily expandable for larger battery banks using TXL extra load units (option)
• Computerized test operation using TorkelWin software (option)

 
BOND TESTER MEGGER - BT51

• High test current
• Four terminal measurement
• Two measuring ranges (2000 mO. and 20,00 mO.)and maximum resolution of 0,01 mO.
• Protected against inadvertent connection to the mains supply

 
TRUSA CURENT-TENSIUNE VERIFICAREA RELEELOR DE PROTECTIE MEGGER SMRT410

• Small, rugged, lightweight and powerful
• Operates with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power output (60 Amps/300 VA rms) per phase
• Flexible output design provides up to 4-phase voltage and up to 10-phase current
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS software

 
REFLECTOMETRU TDR LOCALIZARE DEFECTE CABLU MEGGER TDR500/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO selection of gain and pulse width.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.

 
TRUSA AVANSATA PRIZE DE PAMANT INALTA PRECIZIE SI REZOLUTIE MEGGER DET2/3

• Rezoluție înaltă de 1 mΩ, ideală pentru sisteme de împământare mari
• Moduri de testare versatile
• Precizie ridicată pentru testele de rețea ale electrodului de împământare/masă și rezistivitatea solului
• Baterie reîncărcabilă care poate dura toată ziua cu o reîncărcare rapidă (până la 10 ore)
• Instrument robust cu protecție IP65
• Selectare automată a frecvenței de testare, cu filtre și funcții de curent ridicat