• CAT IV 600 V
• Charge current: 5 mA
• 4 mA noise rejection and software filtering
• Mains or battery powered
• Digital/analogue backlit display
• Variable test voltage from 50 to 10000V
• Automatic IR, PI, DAR, SV and DD tests
• Measures to 35 TO
• RS232 and USB download of results to Megger Download Manager
• On board memory for results storage

Now CAT IV 600 V this new 10 kV insulation resistance testers from Megger are designed specifically to assist you with the testing and maintenance of high voltage electrical equipment in areas prone to high amounts of electrical noise.

The case is incredibly rugged and easy to carry, being made of tough polypropylene and achieving an ingress protection rating of IP54. In addition, the model number is marked on both the top and side of the case for ease of identification in stores or vehicles.

Accesorii standard

5 kV insulation resistance tester S1-554/2

10 kV insulation resistance tester S1-1054/2

Included Accessories

3 m lead set medium insulated clips 1002-531

User guide on CD-ROM 2000-213

RS232 cable 25955-025

USB cable 25970-041

3 x 3 m lead set large insulated clips (S1-1054/2 only) 1002-534

Optiuni recomandate

Optional Accessories

HV test lead sets

5 m leadset x 3, medium insulated clips* 1002-641

8 m leadset x 3, medium insulated clips 1002-642

10 m leadset x 3, medium insulated clips 1002-643

15 m leadset x 3, medium insulated clips 1002-644

5 m leadset x 3, large insulated clips* 1002-645

8 m leadset x 3, large insulated clips 1002-646

10 m leadset x 3, large insulated clips 1002-647

15 m leadset x 3, large insulated clips 1002-648

3 m leadset x 3, bare compact clips 8101-181

8 m leadset x 3, bare compact clips 8101-182

15 m leadset x 3, compact bare clips 8101-183

1 kV test lead sets

2 x 3 m control circuit, small insulated clips 6220-822

Screened HV test leads

1 x 3 m, 5 kV screended un-insulated compact clips 6220-835

1 x 15 m, 5 kV screened un-insulated compact clips 6311-080

1 x 3 m, 10 kV screened un-insulated compact clip 6220-834

1 x 10 m , 10 kV screened un-insulatedcompact clip 6220-861

1 x 15 m , 10 kV screened un-insulated compact clip 6220-833

Other

CB101, 5 kV calibration box 6311-077

Calibration certificate - CB101 1000-113

UKAS calibration certificate CB101 1000-047

Alte produse MEGGER

VACUUM INTERRUPTER TESTER MEGGER - VIDAR

• Tests the integrity of vacuum interrupters quickly, safely and easily
• User defined voltage selection
• Extensive voltage range
• Easy to operate. Follows ANSI/IEEE standardized DC test methods.
• Lightweight and portable

SMART PRIMARY INJECTION TEST SYSTEM MEGGER SPI225

• Up to 2000A output
• Smallest primary injection test system in its class
• First unit on the market to eliminate variac control
• Output current regulation
• Designed for switchgear commissioning, circuit breaker, CT commissioning, ground grid and relay testing
• Software includes thousands of circuit breaker TCC curves

PRIMARY CURRENT INJECTION TEST SYSTEM MEGGER ODEN AT

• Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
• Modular design to permit optimal user configuration of output current vs. unit size
• Compact transport cart facilitates portability into switchgear rooms with limited space
• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result

TRUSA TRIFAZATA CURENT-TENSIUNE VERIFICARE RELEE DE PROTECTIE MEGGER SMRT36

• Small, rugged, lightweight and powerful
• Operate with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power (60 Amps/300 VA rms) per phase
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS Software

KARL FISCHER MOISTURE IN OIL TEST SETS MEGGER ½ KF875 AND KF-LAB MKII

• Coulometric Karl Fischer titrimetry
• KF875 optimized for insulating oil with an SG of 0.875, completely portable
• KF-LAB MkII offers greater flexibility, versatility and sample data input than the KF875; also completely portable
• KF-LAB MkII analyzes materials with an SG between 0.6 & 1.4, plus insulating oils with an SG of 0.875

TESTER TDR LOCALIZARE DEFECTE CABLURI MEGGER TDR1000/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO set up for instant use.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature to allow comparison between cables.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.

ANALIZOR DIAGNOZA IZOLATIE SI PIERDERI ULEI ELECTROIZOLANT MEGGER IDAX-300 IDAX-350

• Automated measurement and analysis of moisture content, tan delta/power factor and oil conductivity
• Individual temperature correction (ITC) of tan delta/power factor and oil conductivity
• 40% faster measurements with the new IDAX 5.0 SW
• Reliable measurements in high-interference environments
• Multi-function test set for transformer measurements

MICRO-OHMMETER MEGGER MOM690A

• Easy-to-use
• Automatic range settings
• MOM Win PC software

MEGOHMETRU IZOLATIE 15000V 15KV MEGGER S1-1568/2

• Rezultate fiabile în substaţii zgomotoase
• Teste precise cu RE>Act™
• Control de la distanţă pentru testare mai sigură şi mai ușoară
• PI Predictor™ reduce timpul de testare la jumătate
• Suită completă de diagnosticare cu capacitate PDC

UNIVERSAL CIRCUIT BREAKER TEST SETS MEGGER DDA-3000 AND DDA-6000

• Model DDA-1 Digital Data Acquisition Instrumentation and Control System
• High-current output: 60,000 A for Model DDA-6000; 35,000 A for Model DDA-3000
• Digital signal processing (DSP) technology
• Variable pulse time and firing angle output current control
• Compliant with NEMA AB-4 test guidelines

Megohmmetru rezistenta izolatie 10kV Megger S1-1054/2PRODUS OBSOLET ( * SCOS DIN UZ )

Megohmmetru rezistenta izolatie 10kV Megger S1-1054/2
PRODUS OBSOLET ( * SCOS DIN UZ )