Modul PXI matrice RF 3GHz 1 x 16, 75 Ohm Agilent M9153A

• 200 MHz bandwidth
• 2 channels
• 32 Mpts memory depth, 64 Mpts interleaved single-shot
• 1 GSa/s sample rate on 2 channels interleaved, 500 MSa/s each channel

• 40 2-wire channels
• 300V, 1A switch; 2A carry current
• 100 ch/s scanning
• Mix 2- or 4-wire configurations
• 45 MHz Bandwidth

 

• Multiple sources in an integrated one-box solution
• Dual-range linear outputs
• 2, 3 or 4 independent isolated outputs
• Stable, low ripple and noise power source
• Measured V & I readback over GPIB

 

• RF signal routing to 3 GHz for 75 ohm applications
• 1x8 75 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 75 ohm input impedance
• 52 dB isolation at 1 GHz

 

• 120 Hz, 1 kHz, 1 MHz measurement frequency
• 0.07% Basic accuracy
• High-speed measurements to 2.3 ms @ 1 MHz

 

• 16 bits of digital input and output
• 100 kHz totalizer input
• Two +/-12V analog outputs

 

• Frequency options:
• 9 kHz - 4.5 GHz/ 6.5 GHz/ 8.5 GHz
• 100 kHz - 4.5 GHz/ 6.5 GHz/ 8.5 GHz (with bias tees)
• 300 kHz - 14 GHz/ 20 GHz (with bias tees)

 

• 350 MHz bandwidth
• 2 GSa/s sample rate
• 2 analog plus 16 digital channels
• Standard 8 Mpts MegaZoom III deep memory

 

• RF switching to 3 GHz
• Quad 1x4 50 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 1W switching
• 50 dB isolation at 1 GHz
• 1.3 dB insertion loss at 3 GHz

 

• 40 MHz bandwidth
• 2 analog channels
• 200MS/s sample rate
• 6000 count Digital Multimeter
• 11KS Maximum recording length viewable on screen with zoom function