Generator impulsuri si Date 660 MHz Agilent 81130A 81132A

• 1 µHz - 330 MHz pulse generation with variable rise/fall time
• 1 µHz - 500 MHz sine waveform output
• 14-bit, 2.5 GSa/s arbitrary waveforms
• 1 or 2 channel, coupled and uncoupled

 

• Two SPDT terminated switches
• 4 GHz, 20 GHz, or 26.6 GHz options
• High isolation, low VSWR
• Up to 50W switching

 

• High-speed USB 2.0
• 16-bit resolution
• 64 SE/32 DI multiplex analog input channels
• Up to 500 kSa/s sampling rate
• 2 12-bit analog output channels
• 1 MSa/s analog output update rate
• 24-bit programmable TTL input/output channels

 

• 1 MHz to 3 GHz, with 100 kHz steps
• 1% basic accuracy
• Wide impedance measurement range from 200 milliohm to 3 kohm

 

• 9 kHz to 3 GHz
• 0.1 Hz resolution
• 20 Hz to 80 kHz low frequency (LF) output
• -127 to +13 dBm output level range (maximum +20 dBm settable)
• Optional IQ modulator, 40 MHz bandwidth

 

• Network Analyzer 2 MHz to 4 GHz/ 6 GHz
• Transmission/reflection (S21, S11) or full two-port (S21, S11, S12, S22)
• Cable and Antenna Analyzer 2 MHz to 4 GHz/ 6 GHz
• Power Meter 9 kHz to 24 GHz
• Vector Voltmeter 2 MHz to 4 GHz/ 6 GHz

 

• 68-channel portable logic analyzer
• 4 GHz (250 ps) timing zoom with 64 K memory
• 1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
• up to 450 MHz State clock rates
• up to 500 Mb/s Data rates
• up to 32 M acquisition memory depth

 

• 1 mHz to 80 MHz
• 1 or 2 Channels(order 2 x 81105A modules)
• 3 ns to 200 ms variable transition time
• Up to 10 Vpp into 50 O (20 Vpp into open circuit)

 

• Fast, low-noise Single outputs
• Linear output regulation
• Overvoltage & overcurrent protection
• Measured V & I readback over GPIB

 

• General purpose switching to control external devices or
• switching in light loads or power supplies
• 100-channel SPST switch
• 100Vrms
• 1A switch/carry current
• 25W max power