500VA AC Test Capacity
240x64 Ice Blue Dot matrix LCD
Sweep Function for DUT characteristic analysis
Insulation resistance measurement up to 50GO(GPT-9903/9904)
Manual/Auto Mode
Function Key for quick selection
High intensity flash for caution & Status indication
Safety INTERLOCK function
Zero Crossing Turn-on Operation
Controllable Ramp-up Time
True RMS Current Measurement
High resolution: 1uA for measuring current, 2V for setting voltage
PWM amplifier to enhance the power efficiency and reliable testing
Max. 100 memory block for test condition (step) setting. And each step can be named individually.
Remote terminal on the front panel for ½start½ and ½stop½ control
Rear panel output available
Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

GPT-9904 AC 500VA AC/DC Withstanding Voltage / Insulation Resistance / Ground Bond Tester

GPT-9903 AC 500VA AC/DC Withstanding Voltage / Insulation Resistance Tester

GPT-9902A AC 500VA AC/DC Withstanding Voltage Tester

GPT-9901A AC 500VA AC Withstanding Voltage Tester

Accesorii standard

Quick Start Guide x 1,

CD x1(completed user manual)

Power cord x 1,

Interlock key x 1,

Remote terminal male plug x 1,

Test lead GHT-114 x 1 for GPT-9903/9902A/9901A

Test lead GHT-114 x 1, GTL-115 x 1 for GPT-9904

Optiuni recomandate

Option

Opt.1 GPIB card

Optional Accessories

GHT-113 High Voltage Test Pistol

GHT-205 High Voltage Test Probe

GTL-232 RS232C Cable, 9-pin Female to 9-pin, null Modem for Computer

GTL-247 USB Cable, A-A type, approx. 1.8m

GTL-248 GPIB Cable, approx. 2m

GRA-402 RACK Adapter Panel (19½, 4U)

Alte produse GW INSTEK

GOODWILL INSTEK GCT-9040

• AC 40A Ground Bond Tester
• Measuring Resistance from 1mO~650mO
• Connect with the GPT-9800/9900 series to become a multifunctional test or simultaneous test system
• 240x64 Ice Blue Dot Matrix LCD
• Function Key for quick selecting

GOODWILL INSTEK GDM-8342 & GDM-8341

• The basic precision of DC voltage: 0.02%
• Auto/manual Ranging
• True RMS (AC,AC+DC) measurements
• 11 different measurement functions

GOODWILL INSTEK GPR-H SERIES

• 0.01% High Regulation
• Constant Voltage and Constant Current Operation
• Internal Select for Continuous or Dynamic Load
• Low Ripple and Noise

GOODWILL INSTEK LCR-900 SERIES

• Parallel/Series Testing Mode
• Sorting Mode for Quality Control
• 2Wire or 5Wire Measurement Available
• Data Hold and Zero Mode Supported

GOODWILL INSTEK GDM-8034

• 8 Functions AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Diode Test and Audible Continuity Beeper
• High Voltage 1000V and 20A Current Range
• 0.5% Basic DCV Accuracy
• LCD Display

GOODWILL INSTEK PPH-1503

• High Measurement REsolution (1mV/0.1mA for 5A Range);(1mV/0.1uA for
• 5mA Range)
• EXternal Relay Control Output On/Off
• Sink Current Capability (Maximum:2A)
• Digital Panel Control

GOODWILL INSTEK APS-7000 SERIES

• Low Ripple & Noise
• Measurement and test functions include VOLT?CURR?PWR?SVA?IPK?IPKH?FREQ?PF?CF
• Support a small AC current measurement 2mA ~ 35A, Min. resolution 0.01mA(APS- 7050& APS-7100)
• Reverse Current Alarm Function

GOODWILL INSTEK GFG-8200A SERIES

• Frequency Range: 0.3Hz ~ 3MHz (GFG-8215A/8216A/8217A/8219A)
• Frequency Range: 0.5Hz ~ 5MHz (GFG-8250A/8255A)
• Waveforms: Sine, Triangle, Square,Ramp, TTL and CMOS Output
• External Voltage Controlled Frequency (VCF) Function

GOODWILL INSTEK LCR-6000 SERIES

• Consecutive test frequency
• Basic accuracy : 0.05%
• Measuring speed up to 25ms (max.)
• Full frequency range or spot OPEN/SHORT

GOODWILL INSTEK GAD-201G

• Automatic level & distortion measurements
• Auto or Hold function selectable
• 0.1% ~ 100% in 7 distortion measuring ranges
• 20Hz ~ 20kHz in 3 continuous ranges
• 400Hz, 1kHz, 10kHz 3 frequency spots
• 1mVrms ~ 300Vrms in 12 ACV measuring ranges