Politici de confidentialitate

Date GDPR Termeni utilizare Politica cookies Confidentialitate Livrare si plata Cum comanzi?
Accept conditiile de utilizare Continua
 
office@distek.ro  +40 760952425   Cere ofertă (0) 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


GOODWILL INSTEK GPS-Series

Cod: GOODWILL INSTEK GPS-Series


 
Brosura produs PDF, 1.11 Mb
   

Descriere

The GPS-Series are single output, 54 to 90W, linear DC power supplies. The GPS-Series include both analog and digital display meters with varying power outputs. The GPS-Series feature Overload and reverse polarity protection as well as high regulation and low ripple / noise that are maintained at 0.01% and < 1mVrms, respectively. Continuous or dynamic internal load selection accommodates applications such as pulsed current. Remote control terminals offer programming and operation from an external device.

 

Features:

  • Light and Compact Design
  • 0.01% High Regulation
  • Constant Voltage and Constant Current Operation
  • Remote Control for External Programmability
  • Internal Select for Continuous or Dynamic Load
  • Low Ripple and Noise
  • Overload and Reverse Polarity Protection
  • Series or Parallel Operation
  • Optional European Type Jack Terminal for GPS-3030/GPS-3030D/GPS-3030DD
 

Alte produse INSTEK

ANALIZOR DE SPECTRU RF 9KHZ..3GHZ GW INSTEK GSP-830

• Frequency Range : 9kHz ~ 3GHz
• Low Noise Floor(-117dBm@1GHz, 3k RBW)
• Sequence Programming Functions
• ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements
• 10 Markers with Delta Marker, Peak Functions
• AC/DC/Battery(Option)three modes of power supply
• USB/RS-232C/GPIB(Option) Interface
• 6.4" TFT Color LCD, Resolution: 640x480

 
GOODWILL INSTEK PEL-3000 SERIES

• Commands are compatible with Kikusui PLZ-4W model.
• Dynamic(Switching) Function:0.0166Hz ~20kHz
• Soft Start Function:Off / On(1~200ms, Res:1ms)
• Adjustable OCP / OVP / OPP / UVP Setting
• Short Circuit Function

 
TESTER RIGIDITATE DIELECTRICA GW-INSTEK GPT-9901A GPT-9902A GPT-9903 GPT-9904

• 500VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Sweep Function for DUT characteristic analysis
• Insulation resistance measurement up to 50GO(GPT-9903/9904)
• Manual/Auto Mode
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

 
GOODWILL INSTEK GFG-8200A SERIES

• Frequency Range: 0.3Hz ~ 3MHz (GFG-8215A/8216A/8217A/8219A)
• Frequency Range: 0.5Hz ~ 5MHz (GFG-8250A/8255A)
• Waveforms: Sine, Triangle, Square,Ramp, TTL and CMOS Output
• External Voltage Controlled Frequency (VCF) Function

 
OSCILOSCOP ANALOGIC 2 X 50 MHZ GW INSTEK GOS-6051

• 50 MHz bandwidth
• 2 analog channels
• 1mV/div ~ 20V/div
• Cursor Measurement, 6 Digit Frequency Counter, 10 sets Memory for Front Panel Setting Save & Recall

 
GOODWILL INSTEK AFG-2225

• Couple, Tracking, Phase Operations of Dual Channel are Supported
• 1% ~ 99% Adjustable Duty Cycle for Square Waveform
• High Resolution and Colored TFT LCD with Friendly User Interface
• Multiple Editing methods to Edit Arbitrary Waveform Easily

GOODWILL INSTEK MFG-2000 SERIES

• Earth Ground Isolation Design Among I/O Terminals and Instrument Chassis
• Frequency Counter : 150MHz, 8 bits
• AM/FM/PM/ASK/FSK/PSK/SUM/PWM Modulation
• USB Host/USB Device/LAN (MFG-22XX only)
• 4.3 Inch TFT Color Display

 
GOODWILL INSTEK PPE-3323

• 50 Sets memory
• Self test and software calibration
• Meets UL, CSA, IEC safety regulation
• Auto step running with timer setting

 
GOODWILL INSTEK GPT-9800 SERIES

• Safety INTERLOCK function
• Zero Crossing Turn-on Operation
• Controllable Ramp-up Time
• True RMS Current Measurement

 
OSCILOSCOP ANALOGIC 2 X 100 MHZ GW INSTEK GOS-6103

• 100 MHz bandwidth, Delayed Sweep
• 2 analog channels
• 10 Sets Memory for Front Panel Setting Save & Recall
• Time Base Auto-range
• Cursor Readout with 7 Measurements