The GDS-122 is a reliable and handy instrument for all test and electronic engineers. This model is designed to carry out complicated on-site tests. The Dual-channel unit features 20MHz of bandwidth with a sampling rate of 100MS/s along with multimeter functionality. The color LCD display with a resolution of 320 x 240 helps you to read waveforms easily, especially when displaying a lot of data or multiple waveforms. The compact design with the total weight of 690g allows engineers to carry it around easily. The protective cover of the unit is insulated and specially designed to guarantee endurance and reliability in tough environments. The rechargeable Li-ion battery ensures convenience for on-site testing.

Accesorii standard

User manual x1

AC-DC Adaptor x1

Probe-T5060: 60MHz (10:1/1:1) switchable passive probe (one per channel)

Multimeter test lead x1

Serial data communication cable x1

Extension module for small capacitance measurement x1

Extension module for large current measurement x1

Optiuni recomandate

Alte produse GW INSTEK

ANALIZOR DE SPECTRU RF 9KHZ..3GHZ GW INSTEK GSP-830

• Frequency Range : 9kHz ~ 3GHz
• Low Noise Floor(-117dBm@1GHz, 3k RBW)
• Sequence Programming Functions
• ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements
• 10 Markers with Delta Marker, Peak Functions
• AC/DC/Battery(Option)three modes of power supply
• USB/RS-232C/GPIB(Option) Interface
• 6.4" TFT Color LCD, Resolution: 640x480

OSCILOSCOP PORTABIL CU ECRAN TACTIL INSTEK GDS-200

• GDS-220 200MHz, 2-Channel, Full Touch Panel, Digital Oscilloscope
• GDS-210 100MHz, 2-Channel, Full Touch Panel, Digital Oscilloscope
• GDS-207 70MHz, 2-Channel, Full Touch Panel, Digital Oscilloscope

GOODWILL INSTEK GVT-427B & GVT-417B

• 300½V Full Scale Sensitivity
• Measurement Frequency: 10Hz ~ 1MHz
• Measurement Amplitude: -70dB ~ +40dB in 12 Ranges
• Dual Channel (GVT-427B)
• CE Approved (GVT-417B)

ANALIZOR SPECTRAL 9KHZ..3GHZ GW INSTEK GSP-930

• Frequency Range: 9kHz ~ 3GHz
• High Frequency Stability: 25ppb (0.025ppm)
• RBW: 10Hz ~ 10kHz in 1-3 steps, 10kHz ~ 1MHz in 10% adjustable steps
• Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset
• Built-in Measurement Functions: Channel Power, N-dB bandwidth, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO
• Built-in Spectrogram and Topographic Display Modes

GOODWILL INSTEK GPT-9900 SERIES

• Function Key for quick selection
• High intensity flash for caution & Status indication
• Safety INTERLOCK function
• Zero Crossing Turn-on Operation
• Controllable Ramp-up Time

GOODWILL INSTEK SFG-1000 SERIES

• DDS Technique and FPGA Chip Design
• Frequency Range:0.1Hz~3MHz
• High Frequency Accuracy : ½ 20ppm
• High Frequency Stability : ½ 20ppm

GOODWILL INSTEK PEL-2000A SERIES

• Multiple independent load inputs up to 8 channels in a mainframe
• Parallel connection of inputs for increased load capacity
• Parallel connection of inputs for static and dynamic tests
• OPP/OCP/OVP/OTP protections

GOODWILL INSTEK LCR-6000 SERIES

• Consecutive test frequency
• Basic accuracy : 0.05%
• Measuring speed up to 25ms (max.)
• Full frequency range or spot OPEN/SHORT

GOODWILL INSTEK GCT-9040

• AC 40A Ground Bond Tester
• Measuring Resistance from 1mO~650mO
• Connect with the GPT-9800/9900 series to become a multifunctional test or simultaneous test system
• 240x64 Ice Blue Dot Matrix LCD
• Function Key for quick selecting

GOODWILL INSTEK GUT-6600A

• Easy-Operating Tester, Particularly be Designed for the Digital IC
• Supported Device:74/54/40/45 Serial, Drive 2xxx
• Small, Portable, Light and Power-Saving, Usable With Battery
• Average Search Time: 0.6 Second
• Display: 16 Characters in 1 Line LCD
• Test Pins: 14~24 Pins