The GPR-H Series are single output, 240 to 375W, linear DC power supplies. Ranging from 8 to 300V, the GPR-H Series come in a number of different configurations to suit a variety of different needs.To protect loads, the GPR-H Series feature robust protection measures with overload and reverse polarity protection. Continuous or dynamic output is supported for pulsed current applications such as power amplifier testing. The high regulation and low ripple/noise make the GPR-H Series suitable for high-end bench-top applications requiring precision.

Features:

0.01% High Regulation
Constant Voltage and Constant Current Operation
Internal Select for Continuous or Dynamic Load
Low Ripple and Noise
Overload and Reverse Polarity Protection
3 1/2 Digit 0.5" LED Display
Internal Select for Continuous or Dynamic Load (for GPR-3510HD/GPR-6060D/GPR-7550D)

Alte produse INSTEK

ANALIZOR DE SPECTRU ANALOGIC 150KHZ..1GHZ INSTEK GSP-810

• Frequency Range: 150kHz ~1GHz
• Fully Digital Phase Locked Loop Technique Design
• High Frequency Stability:±10ppm
• RBW : 3K, 30k, 220k, 4MHz
• High Input Protection Level : +30dBm,±25VDC
• Reference Level Range : -30dBm~ +20dBm
• Two Markers for Absolute and Relative Measurement
• Support standard RS-232C Interface to connect with PC
• Options: Tracking Generator, Power Meter, Remote Control Software

GOODWILL INSTEK GOM-802

• 30000 Counts Display
• High Accuracy 0.05%
• Hi/Lo Comparator and Limit Percent Setting
• Measurement of REL, Actual and % Value
• Continuous or Triggered Measurement Mode

GOODWILL INSTEK PSB-2400L2

• Output Voltage Rating : 80V/800V
• Output Power Rating : 400W~800W
• Constant Power Output for Multi-Range(V&I)Operation
• Series and Parallel Operation(2 Units in Series or 4 Units in parallel Maximum)

GOODWILL INSTEK GAD-201G

• Automatic level & distortion measurements
• Auto or Hold function selectable
• 0.1% ~ 100% in 7 distortion measuring ranges
• 20Hz ~ 20kHz in 3 continuous ranges
• 400Hz, 1kHz, 10kHz 3 frequency spots
• 1mVrms ~ 300Vrms in 12 ACV measuring ranges

OSCILOSCOAPE DIGITALE 2/4 CANALE 150/250/350/500MHZ INSTEK GDS-3000

• GDS-3152 150MHz, 2 channel, 2.5GSa/s
• GDS-3154 150MHz, 4 channel, 5GSa/s
• GDS-3252 250MHz, 2 channel, 2.5GSa/s
• GDS-3254 250MHz, 4 channel, 5GSa/s
• GDS-3352 350MHz, 2 channel, 5GSa/s
• GDS-3354 350MHz, 4 channel, 5GSa/s
• GDS-3502 500MHz , 2 channel, 4GSa/s
• GDS-3504 500MHz , 4 Channel , 4GSa/s

GOODWILL INSTEK GSB-01 / GSB-02

• Front & rear input connector design is suitable for the GPT-9800/9900/9900A series
• A maximum of 4 scanner boxes (32 CH) can be connected to one GPT-9800/9900/9900A series
• High-intensity LED for Channel, Status & Judgment indications

GOODWILL INSTEK PSP-SERIES

• LCD display
• Output on/off control
• 3-step fan speed control
• Voltage/current/power settings

OSCILOSCOP ANALOGIC 2 X 100 MHZ GW INSTEK GOS-6103

• 100 MHz bandwidth, Delayed Sweep
• 2 analog channels
• 10 Sets Memory for Front Panel Setting Save & Recall
• Time Base Auto-range
• Cursor Readout with 7 Measurements

OSCILOSCOP ANALOGIC 2 X 50 MHZ GW INSTEK GOS-6051

• 50 MHz bandwidth
• 2 analog channels
• 1mV/div ~ 20V/div
• Cursor Measurement, 6 Digit Frequency Counter, 10 sets Memory for Front Panel Setting Save & Recall

GOODWILL INSTEK GDM-8135

• High Voltage 1000V and 20A Current Range
• All Range with Protection Circuit
• 0.1% DCV Accuracy
• Auto Zero Circuit