Fluke brings its test and measurement equipment expertise to the foodservice industry with contact and non-contact temperature measurement solutions. The new Fluke FoodPro Thermometer Series provides a complete temperature measurement and monitoring solution for foodservice professionals. It includes two useful temperature inspection tools, which are designed to enable foodservice professionals to quickly and accurately measure food product temperatures and to help detect potential food safety problems.

The Fluke FoodPro non-contact thermometer is the first line of defense against improper receiving, storage and holding temperatures. Using an infrared measurement technique, the highly accurate FoodPro quickly reads surface temperatures, allowing workers to make rapid and frequent temperature measurements - faster than contact units and without fear of cross contamination. The easy-to-see illumination light shows you the measurement area.

The Fluke FoodPro Plus combines the same infrared surface temperature scanner, as well as a probe thermometer and integrated countdown timer for complete inspections of food temperatures and monitoring cooking and cooling intervals.

Both FoodPro Series thermometers are hand-washable and feature unique HACCP check lights, which immediately indicate safe or potentially unsafe holding temperatures with either green or red lights.

Useful applications

Receiving: Use FoodPro Series thermometers to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program.
Food holding: Easily monitor hot and cold food holding. HACCP check lights provide instant recognition of safe/unsafe temperatures.
Inspection: Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements.
Equipment Calibration: Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs.
Dining room: Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste.

Fluke FoodPro Food Safety Thermometer

The easy-to-use and highly accurate Fluke FoodPro non-contact thermometer instantly measures surface temperature, allowing users to make rapid and frequent non-contact temperature measurements without risk of cross contamination.

Infrared temperature range from -35 to 275 �C
HACCP check lights for instant recognition of safe/unsafe temperatures
LED target illumination highlights the entire measurement spot for accurate targeting
Hand washable (IP54 sealed)

Fluke FoodPro Plus Food Safety Thermometer

The Fluke FoodPro Plus combines an infrared non-contact thermometer for surface scans with a probe thermometer for internal temperature readings. An integrated countdown timer with alarm monitors line checks as well as cooking and cooling intervals.

Includes all of the FoodPro features, plus the following:

Built-in fold-out probe for measuring internal food temperatures
Probe temperature range -40 to 200 �C
Countdown timer to monitor cooking, cooling and HACCP exposure times
Backlit display for clear readings in poorly lit areas
MAX temperature displayed for quick reference

Accesorii standard

Fluke FoodPro Food Safety Thermometer
Includes:

AA battery
Quick Start guide

Fluke FoodPro Plus Food Safety Thermometer
Includes:

Built-in contact probe
9 V alkaline battery
Quick start guide
Operator's guide
Soft carry pouch

Optiuni recomandate

Field Replacement Probe
Replacement Probe for FoodPro Plus Thermometer

Alte produse FLUKE

KIT CALIBRARE PNEUMATICA PRESIUNI FLUKE 700PTPK

• Combine with any Fluke-700G Series Gauge, 1,000 psi (69 bar) or less, to make a complete pressure testing kit
• Generate pressure up to 600 psi, 40 bar with the 700PTP-1 test pump
• Connect the 700G Series gauge directly to the included PTP-1 hand pump
• Includes hoses and adapters for connecting to the pressure device to be tested
• Hard case protects pump and gauge and allows gauge to remain connected to the pump

CALIBRATOR MULTIFUNCTIONAL DE PROCES CU HART FLUKE 754

• Measure volts, mA, RTDs, thermocouples, frequency
• ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure
• Power transmitters during test using loop supply with simultaneous mA measurement
• HART Capabilities

CALIBRATOR PORTABIL DE BUCLA FLUKE 707

• 0 to 28 V DC Voltage measure
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• mA accuracy of 0.015%

INDICATOR SUCCESIUNE FAZE MOTOR FLUKE 9062

• 3 phase indication
• Indication of phase rotation
• Indication of motor rotation direction
• Contact free determination of the rotation direction of running motors

MULTIMETRU DIGITAL PORTABIL HVAC 3.5 DIGIT FLUKE 116

• 3.5 digit
• 6000 count
• 0.5% accuracy
• Built-in thermometer for HVAC applications
• Microamps to test flame sensors

SISTEM MENTENANTA SI INTRETINERE INSTALATII INDUSTRIALE FLUKE CNX 3000 GM

• • masuratori de tensiune c.a. si c.c. true-rms, la 1000 V
• • curent c.a. si c.c. true-RMS, cu o rezolutie de 0,01 mA
• • Masuratori de tensiune c.a. true-RMS pâna la 1000V
• • Masuratori de curent c.a. true-RMS la 2500 A

DETECTOR DE TENSIUNE FLUKE 2AC VOLTALERT

• Voltage detection from 200 to 1000 V AC
• Category IV - 1000 V overvoltage rated product

FLUKE TIS65 CAMERA DE TERMOVIZIUNE 260X195

• Fluke TiS10 80x60 pixels
• Fluke TiS20 120x90 pixels
• Fluke TiS40 160x120 pixels
• Fluke TiS45 160x120 pixels
• Fluke TiS50 220x165 pixels
• Fluke TiS55 220x165 pixels
• Fluke TiS60 260x195 pixels
• Fluke TiS65 260x195 pixels

RLC-METRU 50 HZ..100 KHZ FLUKE 6304/ 6304C

• 50, 60, 100, 120 Hz, 200 Hz to 20 kHz (100 Hz steps), 100 kHz test frequencies
• 0.1 % basic accuracy (0.05 % for PM 6304C)
• Easy to use, at-a-glance display

TERMOMETRU CU INFRAROSU DIGITAL PORTABIL FLUKE 62

• High-resolution optics
• High accuracy: 1 % and repeatability: 0.5 %
• MAX temperature display
• Laser targeting
• Backlit display
• Expanded measurement range up to 535 °C (999 °F)