iFlex fexible current probe included, 18-inch circumference
2500 A AC current measurement with iFlex
1000 A AC current measurement with fxed jaw
1000 V AC and DC voltage measurement
True-rms AC voltage and current
Frequency measurement to 500 Hz
60-k O resistance measurement
Min/Max/Avg and inrush recording
500 mV DC measurement range
1000 µF capacitance measurement
CAT IV 600 V, CAT III 1000 V safety rating
Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
Ergonomic design fits in your hand and can be used while wearing protective equipment
Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
Three-year warranty
Soft carrying case

Accesorii standard

18-inch iFlex™ flexible current probe
Coated instruction card
Safety information sheet
Soft carrying case
TL75 test leads
Two AA Alkaline batteries

Optiuni recomandate

i2500-18 iFlex™ Flexible Current Probes 2500 A
i2500-10 iFlex™ Flexible Current Probes 2500 A
TL223 SureGrip™ Electrical Test Lead Kit
TL71 Test Lead Set
TL224 SureGrip™ Silicone Test Lead Set
AC72 Alligator Clip Set
AC285 SureGrip™ Alligator Clip Set
AC220 SureGrip™ Alligator Clip Set
AC87 Heavy Duty Bus Bar Clips
AC89 Heavy Duty Insulation Piercing Test Clip
TL75 Hard Point Test Lead Set
TP1 Slim Reach Test Probe (flat blade)
Fluke MeterCleaner Wipes
H3 Holster (330 Series)
C33 Soft Carrying Case
C1600 Gear Box for Meter and Accessories
C550 Tool Bag
LVD2 Volt Light
L206 Deluxe LED Hat Light
LVD1 Volt Light

Alte produse FLUKE

TERMOMETRU INFRAROSU CU TERMOCUPLU DE CONTACT FLUKE 566/ FLUKE 568

• Measure -40 °C to 800 °C /-40 °F to 1472 °F (568) or -40 °C to 650 °C/-40 °F to 1202 °F (566)
• Easily access advanced features with the soft-key buttons and dot-matrix display
• Measure smaller objects from further away, with a distance-to-spot ratio of 50:1 (568) or 30:1 (566)
• Compatibility with all standard miniconnector Type-K thermocouples allow you to preserve your thermocouple investments

CLESTE AMPERMETRIC CURENT TRUE-RMS 400A FLUKE 323

• 400 A ac current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection

TESTER INSTALATII ELECTRICE 50V-1000V FLUKE 1653B

• Test voltage: 50V, 250V, 500V, 1000V
• Two measurements at once and a dual display
• PEFC/PSC and loop impedance
• Fast voltage measurement between L-N, L-PE and N-PE
• PASS/FAIL indication for RCD test results
• Earth resistance

CLESTE AMPERMETRIC DE CURENT TRUE-RMS AC/DC 200A FLUKE 365

• 200 A AC and DC current measurement with detachable jaw
• 600 V AC and DC voltage measurement
• True-rms AC voltage and current
• 6000 O resistance measurement

CALIBRATOR DE PRESIUNE FLUKE 718

• Pressure Source and Milliamp Measurement
• Best in class mA accuracy of 0.015 %
• 1, 30, 100 & 300 PSI ranges available

TESTER TENSIUNE SI CONTINUITATE FLUKE T100

• Display: 12 LED's
• Voltage test
• Optical and acoustical continuity test

FLUKE TI400 CAMERA INFRAROSU TERMOVIZIUNE 320X240

• Rezolutie detector : 320 X 240 pixeli
• Domeniu masura temepratura: -20 °C si +1200 °C
• Precizie : ± 2 °C sau 2%
• Sensibilitate : = 0,05 °C
• Banda spectru : 7,5 µm si 14 µm
• Ecran tactil capacitiv, rezistent, cu înalta rezolutie de 640x480

ESA710 ANALIZOR SECURITATE ELECTRICA APARATURA MEDICALA

• Ecran tactil de 5” cu interfață intuitivă pentru utilizator
• Design mic, portabil, ergonomic, cu mâner integrat
• Automatizarea fluxului de lucru activată de OneQA elimină necesitatea unui laptop
• Capacitatea wireless vă permite să rulați proceduri de testare pe teren și să sincronizați automat rezultatele

CALIBRATOR DE PRESIUNE FLUKE 719PRO CU POMPA INTEGRATA

• Fluke-719Pro-30G -12 to 30 PSI / -0.8 to 2 bar
• Fluke-719Pro-150G -12 to 150 PSI / -0.8 to 10 bar
• Fluke-719Pro-300G -12 to 300 PSI / -0.8 to 20 bar
• Unique integrated electric pump for one handed pressure calibration
• Pressure measurement from internal or external sensor
• Sourced/simulated or measured mA values
• Temperature measured by optional RTD probe

CALIBRATOR DE PRESIUNE FLUKE 721

• 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor
• 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Measures 4 to 20 mA signals
• Internal 24 V loop power supply can power a transmitter under test
• Measure up to 30 V dc, check 24 V loop power supplies