Analizator portabil de calitate energie electrica Fluke 435 II

Cod: Fluke 435-II 435II


 

Brosura produs PDF, 0.82 Mb
   

Descriere

  • Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp.
  • PowerWave data capture: Capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
  • Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses.
  • Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.
  • Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
  • Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex design to fit into the tightest places.
  • Automatic Trending: Every measurement is always automatically recorded, without any set-up.
  • System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard.
  • Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals.
  • View graphs and generate reports: With included analysis software.
  • Battery life: Seven hours operating time per charge on Li-ion battery pack.
 

Accesorii standard

  • BC430 Power Adapter
  • International plug adapter set
  • BP290 (Single capacity Li-ion battery) 28 Wh (8 hours or more)
  • TLS430 Test lead and Alligator clip set
  • WC100 color coding clips and regional decals
  • i430flex-TF, 24 inch (61 cm) length, 4 flexible current probes
  • 8 GB SD card
  • PowerLog on CD (includes operator manuals in PDF format)
  • USB cable A - Mini B
 

Optiuni recomandate

Clips

AC285

AC285 SureGrip™ Alligator Clip Set

 

Batteries, Chargers and Adapters

BP290

2400 mAh Li-ion battery for Fluke 190-series II

BP291

4800 mAh High capacity Li-ion battery ) for Fluke 190-seriesII

BC430

BC430 Line Voltage Adapter/Battery Charger

EBC290

EBC290 External Battery Charger, charges BP291 while outside instrument

 

Cables and Hardware

GPS430

GPS430 Time Synchronization Module

 

Current clamps

90i-610s

90i-610s AC/DC Current Probe (600 A)

i30s

Fluke i30s AC/DC Current Clamp

i1000s

i1000s AC Current Clamp (1000 A)

i200s

i200s AC Current Clamp

i3000s

i3000s AC Current Clamp

i400s

i400s AC Current Clamp

i5sPQ3

i5sPQ3 AC Current Clamp, 3-pack

 

Options

HH290

Hanging Hook for ScopeMeter 190-Series II

 

Test Leads

TLS430

TLS430 Test Leads and Alligator Clips set

WC100

WC100 Color Localization Set

 

Alte produse FLUKE

CALIBRATOR TERMOCUPLE FLUKE 714B

• measure and simulate (17) different thermocouple types and millivolts
• Measure 4 to 20 mA signals while simultaneously sourcing a temperature signal
• Configurable 0 % and 100 % source settings for quick 25 % linearity checks
• Linear ramp and 25 % step auto ramp based on 0 % and 100 % settings
• Dual inputs and backlit display for easy interpretation of measurements
• Power down settings remembered at power up for easy restart of tests
• 1-year and 2-year specifications and traceable certification of calibration

 

TESTER PRIZA DE PAMANT FLUKE 1621

• 3-pole Fall-of-Potential earth testing for basic measurements
• 2-pole resistance measurements for added versatility
• 600 V Cat II

 

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 725

• 0 to 100 mV, 0 to 30 V DC Voltage measure
• 0 to 100mV, 0 to 10 V DC Voltage source / simulate
• 0 to 24 mA Current measure / source / simulate
• 0 to 3200 O Resistance measure / source / simulate
• 1 to 10 kHz Frequency measure / source / simulate
• RTDs, thermocouples measure / source / simulate
• pressure measure

 

TERMOMETRU INFRAROSU CU TERMOCUPLU DE CONTACT FLUKE 566/ FLUKE 568

• Measure -40 °C to 800 °C /-40 °F to 1472 °F (568) or -40 °C to 650 °C/-40 °F to 1202 °F (566)
• Easily access advanced features with the soft-key buttons and dot-matrix display
• Measure smaller objects from further away, with a distance-to-spot ratio of 50:1 (568) or 30:1 (566)
• Compatibility with all standard miniconnector Type-K thermocouples allow you to preserve your thermocouple investments

 

ESA710 ANALIZOR SECURITATE ELECTRICA APARATURA MEDICALA

• Ecran tactil de 5” cu interfață intuitivă pentru utilizator
• Design mic, portabil, ergonomic, cu mâner integrat
• Automatizarea fluxului de lucru activată de OneQA elimină necesitatea unui laptop
• Capacitatea wireless vă permite să rulați proceduri de testare pe teren și să sincronizați automat rezultatele

 

CLESTE FLEXIBIL DE CURENT AC WIRELESS FLUKE CNX I3000 IFLEX

• Masuratori de curent c.a. true-RMS la 2.500 A
• Precizie de 3%
• Înregistrare în memorie a pâna la 65.000 de masuratori
• Sonda de curent iFlex permite patrunderea în spatii înguste, dificile
• Afisaj LCD cu lumina de fundal
• CAT IV 600 V, CAT III 1000 V


FLUKE 125B 125B/S SCOPEMETER OSCILOSCOP PORTABIL 2X40MHZ

• 2-canale 40MHz
• Osciloscop digital cu intrare dublă şi multimetru
• Lătime de bandă a osciloscopului de 40 MHz sau 20 MHz
• Două multimetre digitale true-RMS cu limită de numărare de impulsuri 5000
• Măsurarea energiei (W, VA, VAR, PF, DPF, Hz)
• Tensiune, curent şi armonice de energie
• Adaptor WiFi optional conectat la port USB intern pentru transfer wireless de informatii către PC, laptop sau aplicatia mobilă Fluke Connect®*1

 

FLUKE 190-202 190-202/S OSCILOSCOP PORTABIL DIGITAL 2X200 MHZ

• 2-canale izolate 200MHz
• Clasa de protectie CAT III 1000 V, CAT IV 600 V
• Multimetru digital dedicat cu 5000 de numărări la modele cu două canale
• Măsurători automate avansate, energie (Vpwm, VA, W, PF) ™ timp (mAs, V/s, w/s)
• Clasa de protectie IP-51 pentru praf şi lichide pentru a rezista in medii dificile
• Porturi USB izolate

 

MULTIMETRU DIGITAL PORTABIL 3.5 DIGIT FLUKE 77IV

• 3.5 digit
• 6000 count resolution
• 0.3% basic accuracy
• Large display
• Backlight for work in dim areas

 

TESTER VIBRATII FLUKE 805

• measures overall vibration as well as specific variables like bearing condition and temperature
• calculate bearing condition and overall vibration
• Sensor sensitivity can read a wide range of frequencies (10 to 1,000 Hz and 4,000 to 20,000 Hz)
• Exportable data via USB
• Crest Factor+