4.5 digit
6000 count resolution for precise measurements
0.05% basic accuracy
True-rms ac voltage and current for accurate measurements on non linear signals
Selectable filter for accurate voltage and frequency measurements on motor drives
Built in thermometer lets you carry one less tool (TC probe included)
ATEX safety rating Ex II 2 G Eex ia IIC T4
Measure up to 1000 V ac and dc
Measure up to 10 A, 20 A for up to 30 seconds
Frequency to 200 kHz and % duty cycle
Resistance, continuity and diode test
10,000 µF capacitance range for components and motor caps
Min/Max-Average recording with Min/Max Alert to capture variations automatically
Peak capture to record transients as fast as 250 µs
Relative mode to remove test lead interference from low ohms measurements
Auto and manual ranging for maximum flexibility
Touch Hold to capture stable readings avoiding noisy signals
Large display digits and two-level bright white backlight for increased visibility
Analog bargraph for fast changing or unstable signals
Input Alert provides audible warning against wrong use of input jacks
Improved selectable sleep mode for long battery life
Access door for fast battery changes without breaking the calibration seal
"Classic" design with new removable holster with built in test lead and probe storage
Lifetime warranty

Accesorii standard

TL75 test leads
AC72 alligator clips
yellow holster (H80M excl. TPAK)
80BK temperature probe
9 V battery (installed)
CD-ROM user’s manual and technical notes
operator’s guide

Alte produse FLUKE

CALIBRATOR MULTIFUNCTIONAL DE PROCES CU HART FLUKE 754

• Measure volts, mA, RTDs, thermocouples, frequency
• ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure
• Power transmitters during test using loop supply with simultaneous mA measurement
• HART Capabilities

FLUKE 123B 123B/S SCOPEMETER OSCILOSCOP PORTABIL 2X20MHZ

• 2-canale 20MHz
• Osciloscop digital cu intrare dublă şi multimetru
• Lătime de bandă a osciloscopului de 40 MHz sau 20 MHz
• Două multimetre digitale true-RMS cu limită de numărare de impulsuri 5000
• Măsurarea energiei (W, VA, VAR, PF, DPF, Hz)
• Tensiune, curent şi armonice de energie
• Adaptor WiFi optional conectat la port USB intern pentru transfer wireless de informatii către PC, laptop sau aplicatia mobilă Fluke Connect�®*1

POMPA HIDRAULICA CALIBRARE PRESIUNI FLUKE 700HTP-2

• hand operated hydraulic pressure pump
• designed to generate calibration pressures up to 10,000 psi/690 bar
• Variable size stroke adjustment, allows the user to vary the volume and pressure per stroke
• Integral pressure adjustment vernier knob for fine pressure adjustment
• Directly connection to pressure modules consolidates two separate pieces into one when performing pressure calibration and testing
• Two ¼ inch NPT pressure ports, one for reference (pressure module or gauge), one for UUT
• Improved priming
• Improved stroke limiting mechanism

TELEMETRU LASER PORTABIL 100M FLUKE 424D

• The ultimate Fluke laser distance meter
• Measures up to 100 m (330 feet)
• Feature-rich meter includes tilt sensor for hard-to-reach measurements, corner angle feature and compass

TESTER VIBRATII FLUKE 805

• measures overall vibration as well as specific variables like bearing condition and temperature
• calculate bearing condition and overall vibration
• Sensor sensitivity can read a wide range of frequencies (10 to 1,000 Hz and 4,000 to 20,000 Hz)
• Exportable data via USB
• Crest Factor+

CLESTE AMPERMETRIC CURENT TRUE-RMS 400A FLUKE 325

• 400 A ac and dc current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection
• Temperature and capacitance measurement
• Frequency measurement

MEGOHMETRU DIGITAL MULTIMETRU IZOLATIE 500/ 1000V FLUKE 1503

• Insulation test range: 0.1 MO to 2000 MO
• Insulation test voltages: 500 V, 1000 V

CALIBRATOR DE PRESIUNE FLUKE 719PRO CU POMPA INTEGRATA

• Fluke-719Pro-30G -12 to 30 PSI / -0.8 to 2 bar
• Fluke-719Pro-150G -12 to 150 PSI / -0.8 to 10 bar
• Fluke-719Pro-300G -12 to 300 PSI / -0.8 to 20 bar
• Unique integrated electric pump for one handed pressure calibration
• Pressure measurement from internal or external sensor
• Sourced/simulated or measured mA values
• Temperature measured by optional RTD probe

TELEMETRU LASER PORTABIL 80M FLUKE 419D

• Instantly measures up to 80m (260 ft) with accuracy of +/- 1mm
• 3-line display plus storage for 20 complete displays
• Tripod mountable

MULTIMETRU DIGITAL PORTABIL CU DATA LOGGING 4.5 DIGIT FLUKE 287

• 4.5 digit large ¼ VGA display with white backlight
• 50,000 count
• 0.025% basic accuracy
• Logging function with TrendCapture