Calibrator portabil de bucla Fluke 707Ex

Cod: Fluke 707Ex


 

Brosura produs PDF, 0.53 Mb

Descriere

  • 0 to 28 V DC Voltage measure
  • 0 to 24 mA Current measure
  • 0 to 20 mA Current source / simulate
  • mA accuracy of 0.015%, superior to other loop calibrators in this price range
  • For use in explosion endangered areas ATEX certifed (  II 2 G Eex ia IIC T4)

  • Large display and simple, quick-click interface for easy one-handed operation
  • Simultaneous mA and % readout for quick, easy interpretation of readings
  • 1 µA resolution for mA source, simulate and measure
  • Push button 25% steps for fast, easy linearity checks
  • 0-100% "span check" for fast confirmation of zero and span
  • Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests
  • 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM
  • Single 9V battery that is easily changed without braking calibration seal
  • 0 - 20 mA or 4 - 20 mA default start up modes
  • Innovative output adjustment dial with 1 µA and 100 resolution
  • HART ™ mode connects 250 O resistor in series with 24 V loop for compatibility with HART communicators
 

Accesorii standard

  • AC70A Alligator Clips
  • C10 protective yellow holster with Flex-Stand™
  • Instruction sheet
  • TL75 safety-designed test lead set
  • NIST- traceable calibration report and data
 

Alte produse FLUKE

CALIBRATOR DE PRESIUNE FLUKE 718EX

• ATEX II 1G Ex ia IIC T4 Compliant
• Built-in pressure / vacuum hand pump
• Pressure measurement to 0.05%
• Pressure measurement to 200

 

TERMOMETRU INFRAROSU PENTRU INDUSTRIA ALIMENTARA FLUKE FOOD PRO

• Infrared temperature range from -35 to 275 ºC
• HACCP check lights for instant recognition of safe/unsafe temperatures
• LED target illumination highlights the entire measurement spot for accurate targeting
• Hand washable (IP54 sealed)
• Probe temperature range -40 to 200 ºC(Fluke Food Pro Plus)

 

MULTIMETRU DIGITAL PORTABIL IZOLAT ATEX 4.5 DIGIT FLUKE 87V EX

• 4.5 digit
• 6000 count resolution for precise measurements
• 0.05% basic accuracy
• True-rms ac voltage and current for accurate measurements on non linear signals
• Selectable filter for accurate voltage and frequency measurements on motor drives
• Built in thermometer lets you carry one less tool (TC probe included)
• ATEX safety rating Ex II 2 G Eex ia IIC T4

 

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 753

• Measure volts, mA, RTDs, thermocouples, frequency
• ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure
• Power transmitters during test using loop supply with simultaneous mA measurement

 

KIT CALIBRARE HIDRAULICA PRESIUNE FLUKE 700HTPK

• Combine with any Fluke-700G Series Gauge, 1,000 psi range or greater, to make a complete pressure testing kit
• Generates pressure up to 10,000 psi range or greater, to make a complete pressure testing kit
• Connect the 700G Series gauge directly to the HTP-2 hand pump
• Includes 700HTH-1 hose kit and adapters for connecting to the pressure device to be tested
• Hard case protects pump and gauge and allows gauge to remain connected to the pump

 

CALIBRATOR PORTABIL DE TEMPERATURA FLUKE 724

• -10 to 75 mV, 0 to 10 V Voltage source
• -10 to 75 mV, 0 to 30 V Voltage measure
• 0 to 24 mA Current measure
• 0 to 3200 O Resistance measure / source

 

KIT MASURA CURENT AC LA DISTANTA CU CLESTE AMPERMETRIC FLUKE FLK-CNX A3000 KIT

• Masuratori de tensiune c.a. si c.c. true-RMS pâna la 1.000 V
• Curent c.a. ?i c.c. true-RMS cu rezolu?ia de 0,01 mA
• Masuratori de curent c.a. true-RMS la 400 A
• Înregistrare în memorie a pâna la 65.000 de masuratori
• CAT III 600 V; IP42


SISTEM INDUSTRIAL MASURA TENSIUNE SI CURENT FLUKE CNX 3000 IND

• masuratori de tensiune c.a. si c.c. true-rms, la 1.000 V
• curent c.a. si c.c. true-RMS, cu o rezolutie de 0,01 mA
• Masuratori de curent c.a. true-RMS la 2500 A
• Masuratori de tensiune c.a. true-RMS pâna la 1000 V
• CAT III 1000, CAT IV 600 V, CAT III 1000 V; IP42


CALIBRATOR CURENT DE BUCLA CU PRECIZIE FLUKE 709

• Functions: mA source, mA simulate, mA read, mA read/loop power and volts read
• Best-in-class accuracy at 0.01% reading
• Small rugged design operates on (6) standard AAA batteries
• Intuitive user interface with Quick-Set knob for fast setup, easy use
• Built in selectable 250 ? resistor for HART communication

 

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 741B

• 0 to 300 V DC/AC Voltage measure
• 0 to 15 V DC Voltage source / simulate
• 0 to 110 mA DC Current measure
• 0 to 22 mA DC Current source / simulate
• 0 to 11 kO Resistance measure / source / simulate
• 1 to 50 kHz Frequency measure / source / simulate