Extech CO10: Carbon Monoxide (CO) Meter

Cod: Extech CO10


 

Brosura produs PDF, 0.91 Mb

Descriere

Faster response measurements to 1000ppm

Checking co levels is as easy as pushing just 1 button on the model C010, which measures up to 1,000 ppm. An audible indicator increases in tone starting at 35 ppm. The higher the concentration of co, the faster the alarm will sound. Above 200 ppm, the alarm will sound continuously. A backlight on the display can be used for low light areas. Additional features include: max hold, data hold, and auto-power-off. The meter comes complete with a 9-volt battery, protective holster, and case.

 

·         Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm

·         1ppm resolution with ±5% or ±10ppm basic accuracy (whichever is greater)

·         Utilizes a stabilized electrochemical gas specific (CO) fast response sensor

·         Audible alarm starts at 35ppm

·         Backlight for low light conditions

 

Alte produse EXTECH

CAMERA INSPECTII VIDEO CU DISPLAY WIRELESS EXTECH BR200

• Memory card for capturing images (JPEG) or video (AVI) for viewing on your PC
• Detachable wireless 3.5" color TFT LCD display can be viewed from a remote location up to 32ft (10m) from the measurement point
• 39" (1m) flexible gooseneck with waterproof camera (17mm diameter) and 2 built-in bright LED lights for illuminating dark areas

 

EXTECH RH25 PSIHROMETRU INDEX INCALZIRE

• Built-in multiparameter sensor measures Heat Index, Wet Bulb Globe Temperature (WBGT), Humidity, Ambient Temperature, Temperature, Dew Point and Wet Bulb
• User Programmable Heat Index/WBGT alarm
• MIn/Max/Average
• Data Hold, Auto Power Off with disable
• Complete with CR2032 battery

 

EXTECH EX320 MULTIMETRU CU 8 FUNCTII SI DETECTOR TENSIUNE FARA CONTACT

• Autoranging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Large-digit 2,000 count LCD display

 

EXTECH 407750 SONOMETRU CU INTERFATA PC

• Meets ANSI & IEC 651 Type 2 standards
• Background noise absorber for machine noise measurements filters ambient noise
• 30 to 130dB measurement range with ±1.5dB accuracy
• Large display with backlighting and analog bargraph

 

EXTECH HD780 MANOMETRU DIGITAL DIGITAL

• Dual differential inputs for pressure and temperature
• Displays 5 types of pressure units
• For use with R22 and R410A refrigerants
• Standard 1/4 NPT male flare fittings

 

EXTECH MG310 TESTER DIGITAL IZOLATIE

• Test Voltages of 250V, 500V, and 1000V
• Measure Insulation Resistance to 5.5GOhm (autoranging)
• AC Voltage measurement from 30 to 600V
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)

 

EXTECH CO250 TESTER PORTABIL CALITATEA AERULUI PENTRU INTERIOR

• Checks for Carbon Dioxide (CO2) concentrations
• Calculates statistical weighted averages of TWA (8 hour time weighted average) and STEL (15 minute short term exposure limit)
• Maintenance free NDIR (non-dispersive infrared) CO2 sensor

 

EXTECH EMF510 MULTIMETRU RADIATII ELECTRICE MAGNETICE

• Measure EMF/ELF levels in milliGauss (mG) or microTesla (µT) up to 2000mG (200µT) with two ranges to choose from
• Built-in single axis sensor provides basic accuracy reading of ±5%
• 30 to 300Hz bandwidth
• Backlit display to view in dimly lit areas
• Data Hold and Min/Max functions

 

EXTECH SDL400 LUXMETRU CU INREGISTRARE DATALOGGING

• Wide range to 10,000Fc or 100kLux
• Cosine and color-corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Offset adjustment used for zero function to make relative measurements
• Adjustable data sampling rate

 

EXTECH CT40 TESTER CU IDENTIFICATOR DE CABLU

• Troubleshoot electrical/electronic circuits and identify up to 16 local or installed lines
• MultiMeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Wire voltage check from 5 to 16VDC
• Data Hold and Max Hold, Auto power off