Extech EA33 EasyView™ Luxmetru cu memorie

• Includes CL200 meter, pH and ORP electrodes, reagent tablets, 4 plastic cups, weighted stand, pH buffer pouches, batteries and carrying case
• 4-in-1 Water Quality Meter measures Chlorine, pH, ORP plus Temperature with interchangeable flat surface electrodes (included)
• Flat surface electrodes work in liquids, semi-solids and solids
• Memory stores and recalls 15 readings and saves last calibrated value
• Large 3-1/2 digit (2000 count) Digital display with bargraph

 

• Graphic Phase diagram with 3-Phase system parameters
• 3-phase Voltage or Current Unbalanced Ratio (VUR, AUR) and unbalanced factor
• Capture Transient events (including dip, swell, and outage) with programmable threshold (%)
• Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)

 

• Troubleshoot electrical/electronic circuits and identify up to 16 local or installed lines
• MultiMeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Wire voltage check from 5 to 16VDC
• Data Hold and Max Hold, Auto power off

 

• Large LCD display with advanced illuminance functions and features
• Wide measurement range to 99,990Fc (999,900 Lux) with resolution of 0.001Fc and 0.01Lux
• Luminous intensity (candela) calculations
• Store and recall up to 50 measurements, includes relative or real time clock stamp
• Ripple function excludes the effect of stray light from the primary light source measurement
• Timed-Hold, Relative in absolute value or % deviation, and Comparator function with high low alarms

 

• 250V, 500V and 1000V Test Voltages
• Measure Insulation Resistance to 10GOhm
• Large LCD display with analog bargraph
• Lo Ohm function for testing connections

 

• Large easy to read digital display
• AC/DC Voltage, DC Current, Resistance, Continuity, Diode Test and Type K Temperature
• 1.5V and 9V Battery test function
• Complete with 9V battery, general purpose Type K bead wire probe and test leads

 

• Accurately displays light level in terms of Fc or Lux over three ranges
• Select fast (1 second) or slow (2 seconds) response time
• Analog output of 1mV per count for capturing readings to a recorder

 

• True RMS for better accuracy when measuring distorted waveforms
• 2000 count large backlit dual LCD with easy-to read digits
• Low current capability with resolution to 0.1µA
• Input fuse protection
• Max Hold, Data Hold and Auto power off
• Complete with test leads and 9V battery

 

• Use on wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Replaceable threaded measurement electrode pins
• Self-contained, pocket sized meter with belt clip

 

• Sensor wavelength range 320 to 390nm
• UV sensor with cosine correction measures irradiance from UVA light sources up to 20.00mW/cm²
• Backlit LCD to view in dimly lit areas
• Zero function
• Data Hold and Min/Max functions