This RF EMF Strength Meter monitors high frequency radiation in the 50MHz to 3.5GHz range. Ideal for mobile phones, cell phones, base stations, locating RF hotspots, wireless network (Wi-Fi) RF detection, RF"Electrosmog" detection, and microwave leakage. It features non-directional measurement with 3-channel (triaxial) measurement probe, Max Hold and Average functions, and manual store/recall of up to 99 data sets. In addition, there is an audible alarm with a user-selectable threshold. The meter comes complete with a 9V battery and carrying case.

� Ideal for EMF measurements of mobile/cell phones, base stations and microwave leakage

� Measurement optimized for 900MHz, 1800MHz and 2.7GHz

� Non-directional (isotropic) measurement with three-channel (triaxial) measurement probe

� Max Hold and Average functions

� Manual store/recall up to 99 sets

� Level exceed audible alarm with user selectable threshold

� Complete with 9V battery and carrying case

Alte produse EXTECH

EXTECH 96VFL11 1/4 DIN CONTROLER TEMEPRATURA PID CU 2 IESIRI DE RELEE

• Two relay outputs
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control

EXTECH PRC30: MULTIFUNCTION PROCESS CALIBRATOR

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• 0 to 20V DC calibration source
• Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)
• CJC - Cold Junction Compensation function
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix backlit LCD

EXTECH EX350 MULTIMETRU TRUE RMS CU 11 FUNCTII

• True RMS for accurate AC measurements
• 4000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals

EXTECH 382280 SURSA PROGRAMABILA DE PRECIZIE 200W

• High resolution (1mV and 1mA) user programmable output
• Selectable constant Voltage or Current modes
• 0 to 60 second programmable overload delay timer
• Storage/Recall memory

EXTECH PQ3470-30 KIT ANALIZOR DE PUTERE 3 FAZE 3000APQ3470 WITH PQ34-30

• Graphic Phase diagram with 3-Phase system parameters
• 3-phase Voltage or Current Unbalanced Ratio (VUR, AUR) and unbalanced factor
• Capture Transient events (including dip, swell, and outage) with programmable threshold (%)
• Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)

EXTECH 42280 DATALOGGER TEMPERATURA SI UMIDITATE

• Triple LCD displays Humidity, Temperature, and date (Year, Month, and Day)
• Programmable from keypad or PC
• Selectable data sampling rate
• User programmable audible and visual alarms
• Wall, desktop, or tripod mount
• Calibration via optional salt bottles
• Complete with Windows® compatible software, USB cable, universal AC adaptor, and four AA batteries

TESTER UMIDITATE SOL EXTECH MO750 UMIDOMETRU HIGROMETRU

• Meter with Heavy-Duty 8" (20cm) Probe
• Soil moisture content measurement from 0 to 50%
• Easy one-hand operation
• Min/Max records minimum and maximum moisture readings
• Data hold to freeze reading on display
• Water resistant

EXTECH MA150 CLESTE AMPERMETRIC 200A MINI AC CLAMP METER + DETECTOR FARA CONTACT

• 0.7" (18mm) jaw opening
• 2000 count backlit LCD display
• Non-contact AC Voltage detector (100 to 600VAC) via clamp tip
• Built-in white LED flashlight
• Continuity and Diode Test, Max Hold, Auto power off

EXTECH 380820 SURSA UNIVERSALA AC SI ANALIZOR PUTERE

• 99 memory locations for preset voltage and frequency output settings
• User-programmable Over Current Protection
• Programmable through the built-in RS-232 interface
• Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
• Complete with AC power cord, RS-232 to USB cable and software

EXTECH DL160 INREGISTRATOR DATALOGGING CU 2 CANALE TENSIUEN SI CURENT AC TRUE RMS

• Simultaneously measure two AC Voltage inputs or two AC Current inputs or one AC Voltage and one AC Current input
• Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
• LCD indicates time/date, current readings and Min/Max
• Auto Power off and battery check