Automotive Components
Quality Assurance/Comparative Analysis
Testing of Telephone Handsets or Mounted Transducers for Noise Quality
Insertion Measurements of Hearing Aids
Evaluation Testing of Microphones or Preamplifiers for Noise Cancellation, Conductivity and Noise Emissions
Testing Noise Emissions of Small Parts or Components
Head & Torso Testing (SD3)
IT Product Noise Testing

Product Features and Options

Model #	Chamber Dims Outside (L x W x H)	Chamber Dims Inside (L x W x H)	Features	Applications	Some Applicable Standards
SD	91.4 cm x 86.4 cm x 91.4 cm (36 in. x 34 in. x 36 in.)	71.1 cm x 66.0 cm x 71.1 cm (28 in. x 26 in. x 28 in.)	For Testing > 500 Hz Solid Steel Floor Cable Ports (2) Vibration Pads (4) AS-A504 Walls	Quality Control Comparative Analysis	ISO 3744 ISO 3746 ISO 532B ISO 11201
SD1	111.8 cm x 111.8 cm x 111.8 cm (44 in. x 44 in. x 44 in.)	91.4 cm x 91.4 cm x 91.4 cm (36 in. x 36 in. x 36 in.)	For Testing > 500 Hz Solid Steel Floor Cable Ports (2) Vibration Pads (4) AS-A504 Walls Light(1)	Sound Power and Sound Pressure of Auto Parts,Computer Parts, and Small Parts	ISO 3744 ISO 3746 ISO 532B ISO 11201 GMW7293
SD2	152.4 cm x 152.4 cm x 162.6 cm (60 in. x 60 in. x 64 in.)	121.9 cm x 121.9 cm x 132.1 cm (48 in. x 48 in. x 52 in.)	For Testing > 500 Hz Solid Steel Floor Cable Ports (2) Vibration Pads (2) AS-A506 Walls Light(1)	Engineering Test of Small Parts	ISO 3744 ISO 3746 ISO 532B ISO 11201 GMW7293 MS14011
SD3	127 cm x 127 cm x 241.3 cm (50 in. x 50 in. x 95 in.)	106.7 cm x 106.7 cm x 213.4 cm (42 in. x 42 in. x 84 in.)	For Testing > 500 Hz Solid Steel Floor Cable Ports (2) Vibration Pads (2) AS-A504 Walls Light(1)	Head & Torso Testing Speech Intelligibility Codec Scoring End to End Signal Integrity	ISO 3744 ISO 3746 ISO 532B ISO 11201

Accesorii standard

Acoustic Walls, Ceiling, and Floor
Acoustically Engineered Roof Integrated Ventilation System
Light (SD1, SD2, SD3 Only)
Sound Absorbing Perforated Steel Interior (Walls and Ceiling)
Panelized Floor (Reflective)
Floor Vibration Rails, SD2 & SD3
Floor Vibration Pads, SD & SD1
Cable Ports
-- 1 ea. 5.1 cm (2 in.)
-- 1 ea. 2.5 cm (1 in.)
Acoustic Door with Window

Optiuni recomandate

Test Stands (Not Available on SD3)
Absorptive Mini Wedges
Interior Perforated Floor
Stainless Steel Construction
Light (SD Only)
Ventilation Silencers (SD3 Only)

Alte produse ETS-LINDGREN

TESTER CAMP MAGNETIC 5..2000 HZ ETS-LINDGREN HI-3627

• 5 - 2000 Hz
• 0.2 mG - 20 G
• Three Concentric Orthogonal Field Sensors
• True RMS Detection
• Isotropic Response
• 100dB Dynamic Range

STABILIZATOARE IMPEDANTA LINIE DE RETEA ETS-LINDGREN

• Insulated Plugs for Safer Power Connections
• Coils Matched for Application
• Individually Calibrated
• One Piece, Multi-Line Design for Convenience

TESTER CAMP MAGNETIC 2..400 KHZ ETS-LINDGREN HI-3637

• 0.06 mG - 400 G (with 100X probe)
• 2 - 400 kHz
• True RMS Detection
• Three concentric orthogonal field sensors

ANTENA HORN DESCHISA CUADRI-CREASTA 2..18 GHZ ETS-LINDGREN 3164-05

• Frequency Minimum 2 GHz
• Frequency Maximum 18 GHz
• Connectors SMA Female
• Cross Polarization Isolation >24 dB
• Impedance (Nominal) 50 ?
• Maximum Power 25 W
• Pattern Type directional
• Polarization dual linear

ANTENA MONOPOL PASIV DE TRANSMISIE CAMP ELECTRIC 1 KHZ..30 MHZ ETS-LINDGREN 3303

• Frequency Minimum 1 kHz
• Frequency Maximum 30 MHz
• Connectors Type N (f)
• Impedance (Nominal) 50 ?
• Maximum Continuous Power 300 W
• Peak Power 1 W
• Polarization linear
• Switchable Two-band Transformer
• Two Year Warranty

INCINTA ECRANATA TESTARE DISPOZITIVE WIRELESS ETS-LINDGREN 5247

• Roll-About Casters
• Portable RF Shielded Enclosure for OTA measurements
• >80 dB Typical RF Isolation
• RF Absorber Lined
• Dual Polarized Horn Antenna
• 700 MHz - 10 GHz Frequency Range
• Linear & Circular Polarization

ANTENA BUCLA MAGNETICA ECRANATA FRECVENTA JOASA 30 HZ..100 KHZ ETS-LINDGREN 7605/ 7606

• Frequency Minimum 30 Hz
• Frequency Maximum 100 kHz
• Connectors Banana Jack (2) - [7605], BNC - [7606]
• Impedance (Nominal) 50 ?
• Pattern Type omnidirectional
• Polarization linear

TESTER MASURA RADIATII CAMP ELECTROMAGNETIC EMISE DE CUPTOARE MICROUNDE ETS-LINDGREN HI-1501

• Three Ranges
• Calibrated at 2450 MHz
• Battery Operated
• Extra sensitivity for Compliance Measurement

ANTENA HORN PIRAMIDAL MULTI-OCTAVA LINIAR POLARIZATA 960 MHZ..40 GHZ ETS-LINDGREN 3160

• Frequency Minimum 960 MHz
• Frequency Maximum 40 GHz
• Pattern Type directional
• Polarization linear

TESTER EMF CAMP ELECTRIC & MAGNETIC RF CONFORM CU STANDARDE INDUSTRIALE 10..42 MHZ ETS-LINDGREN HI-3408

• 13.56 MHz, 27.12 MHz, 40.68 MHz Cal Frequencies
• Field Intensity Bar Graph
• On-Board Data Logging and Review
• Low Cost EMF Detection
• Electric and Magnetic Field Strength Measurements
• Data Logging (Up to 112 Points)