Pompa pneumatica calibrare presiuni -95%~ 140 bar ConST162

Descriere

Pneumatic pressure pump ConST162

The Model ConST162 Pneumatic pressure calibration Pump is a dual pressure source with the ability to easily adjust and stabilize. This calibration pump possesses both 95% vacuum and pressure 1800psi; uses air as the media, and can adjust the pressure easily and stably. Since it is attached inner gas-liquid isolator and shut-off valve (for releasing dirt), ConST162 is totally free from humidity and dirt..

The adjusting resolution is up to 10 Pa (0.1 mbar). These features make the ConST162 ideal for calibrating pressure transducers, precision pressure gages, and other pressure instruments.

Features

• Pressure up to 120bar by air
• Both vacuum and positive pressure is available.
• High pressure resolution and high pressure stability
• Easy to get the high pressure by using long and tough pressure lever

The adjusting resolution is up to 10 Pa (0.1 mbar). These features make the ConST162 ideal for calibrating pressure transducers, precision pressure gages, and other pressure instruments.

SPECIFICATIONS
Media: Air.
Generated Pressure Range: 14psi (0.95bar) vacuum to 1800psi (120bar) positive pressure
Pressure Resolution: 10 Pa/ 0.1 mbar
Material:
Ram/adapters: 316 SS;
Body: Steel/aluminum;
Seals: Buna-N.
Test Gage Connection: M20*1.5;
Reference Gage Connection: M20*1.5
Dimensions:
Height: 16.53 inch(130 mm);
Base: 147.64 inch(375 mm) x 124.02inch (315 mm).
Weight: 3.31 lb (7.5 kg). 

PRECAUTIONS
1. Please don’t add any oil or water into the pipeline.
2. To avoid damaging the airproof surface, please don’t operate the shut-off valve aggressively.
3. This product can not directly calibrate pressure meters that are used under acid or alkali conditions. If necessary, you must make sure the meters are cleansed by CCl
4 Solvent or melted oil spray to avoid any corrosion damage to the test pump.

MAINTENANCE
Upon final installation of the Model CONST162 Low Pressure Calibration Pump, no routine maintenance is required. A periodic check of system calibration is recommended. The Model CONST1162 is not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return goods authorization number before shipping.