Water Leak detectors | SEBAKMT

Seba KMT Sebalog Corr Multi-Correlator Logger for water leak detection and location

Code: Seba-KMT Sebalog-Corr

Datasheet

PDF, 1.2 Mb

Description

Sebalog Corr

Correlation with up to 8 sensors at the same time
GPS navigation directly to the leak
Radio communication to the sensors
No staff needed for night measurement
Sound velocity assistant (V-assistant)
Unique pinpointing mode

Sebalog Corr is the new generation of leak pinpointing. This hybrid form of a field correlator and a set of noise loggers combines the independent operation mode and the high number of the loggers sensors with the correlators ability to calculate the exact distance to the leak using the sound it makes. This form of leak detection allows the user to locate even the most difficult leaks quickly and precisely, thus saving valuable time and money. The unique pinpointing feature enables the operator to confirm correlations directly on site.

One of the most remarkable features of Sebalog Corr is the leak navigator. Just like a navigation system, the GPS-based leak navigator leads the user to the previ-ously correlated leak position. During navigation, the position of the user is continuously displayed on the map so that he knows exactly in which direction he should go to reach the leak.

Due to their small size, Sebalog Corr’s sensors fit even into the smallest valve chambers. The chamber lids can be closed during the measurement. Accident risks are thus eliminated, and measurements can be carried out with no additional protection for traffic or pedestrians.

Key benefits:

Interfata wirless USB
GPS navigation directly to the leak
Radio communication to sensors
No staff needed for night measurement
Unique pinpointing mode

Standard accessories

Scope of delivery

»» 3, 6 or 8 sensors

»» 3, 6 or 8 angle adapter

»» 3, 6 or 8 tripod adapter

»» Radio interface Sebalog RI with USB cable

»» Carrying case

»» Application software

»» GPS receiver

»» Headset

»» Manual

Recommended options

More products SEBAKMT

SEBA KMT VFL SINUS 34KV 0.1HZ SINE WAVE CABLE TEST SYSTEMS

• High test capacity of 5 µF
• Suitable for outdoor use (IP 54)
• Single-button operation easyGO
• Integrated safety system
• Reporting
• Continuous duty cycle

SEBA KMT VLOC-9800 LINE LOCATION AND TRACER FOR UNDERGROUND PIPES AND CABLES

• Clearly laid out user interface
• Automatic or manual amplification options
• Depth and amperage at the press of a button
• Distance Sensitive Left/Right GuidanceTM
• Sheath fault location (optional)

SEBA TELEFLEX-VX ADAPTER FOR SAFE OPERATION OF REFLECTOMETERS ON OVERHEAD LINES

• Very easy to operate
• Very good resolution, for both near and distant ranges
• Dangerous induction voltages reliably discharged
• Connection to a measurement system
• Test pulses up to 1,500 V for long distances
• For distances over 2,000 km

SEBA KMT CI LCI CABLE IDENTIFIER TEST SET

• Inexpensive cable selection system
• Easy to operate
• Safe handling
• Very small

SEBA KMT VFL SINUS 45KV SINE WAVE CABLE TEST SYSTEMS

• VLF sine wave 45 kV with integrated tanDelta
• compact, robust, and portable
• high-performance test and diagnostic system for medium voltage cables
• Performs cable withstand testing, cable diagnosis, and sheath fault pinpointing
• Automatically adjusts the test frequency to the cable length
• Eliminates hazards to the user and guarantees limited damage to the cable
• Easy field operation with no need for external computer

SEBA KMT FERROLUX FLE 10 AUDIO FREQUENCY RECEIVER FOR CABLE LOCATION, SELECTION, SHEATH FAULTS

• Precise direction guidance with right/left arrows
• "SignalSelect" for clear route location
• Depth and signal current intensity measurement at the push of a button
• Route sensor weighs less than 1 kg for non-tiring use
• "DirectSignal" for effective line location

SEBA KMT HVB-10 10KV CABLE FAULT LOCATION, STEATH TESTING AND PINPOINTING MEGGER HVB10

• Output voltage 0 � 10 kV DC, bi-polar
• Automatic test sequence
• Bi-polar prelocation for the elimination of external influences
• Detection and indication of wrong connections
• Touchscreen and rotary encoder
• Only one HV connection cable
• Completely independent of the parameters of auxiliary lines

SEBA FAULT SNIFFER FOR DETECTION OF BURNING GASES FROM FAULT CABLES UNDERGROUND

• Customers can stay connected
• Fault location with no supply interrupt
• Reliable avoidance of incorrect excavations
• Fast and easy location of faults
• Can be used on straight or branched networks
• Handy size, easy to transport
• No pre-location required
• Accuracy in the decimetre range
• Sensitive to several specifi c gases and therefore suitable for any insulation material

SEBA KMT VFL CR-20 VERY LOW FREQUENCY CABLE TESTING SYSTEM

• VLF Test System 20 kV
• high test capacity of 3 µF permits the simultaneous testing of all three phases
• method is officially recommended by the two VDE Standards 0276-620 and 0276-621
• VLF is the most economic method for testing PE and XLPE cables

SEBA KMT EZ-THUMP CABLE FAULT LOCATION SYSTEM ON LV/MV CABLES

• Easiest, fully automatic operation
• All in one small and portable unit
• ARM Prelocation
• Pinpointing with 500 J
• Available as 4 or 12 kV version
• Bright, brilliant colour display
• Battery operation