The PD LOC system solves the problem of pinpointing for mixed cables (XLPE / PILC) and for PD in joints of single core cables. The exact location of the joints in the field is generally not known, and these joints cannot be localised using audio frequency methods.

The system has an impulse transmitter that uses a induc-tive coupler to inject a signal into the cable.

The receiving and evaluating unit consists of an input amplifier for proc-essing the signal and a control unit in the pelicase. The visualisation of the distance system's transmitter location is performed by using a TDR T30-E PD reflectometer in a separate menu, by means of an additional PD software function.

Key Benefits:

Foil keyboard with LEDs for selecting the pulse width
Impulse couplers 42 and 64 mm
Very easy to handle and operate
24 hours of operation with one battery charge
Evaluation identical to the OWTS pre-location
Cable identification option

Standard accessories

Standard set

Tele? ex T 30-E PD

Cable set VL T 30-E

Charger LG 12

Impulse transmitter PD-TX in

the rugged case

Coupler 42 mm

BNC cable 75 cm

Adapter BNC on a pole clamp

Measuring line, 2 m

Recommended options

Optional accessories

Coupler 64 mm

LK 12, 12 V vehicle charging

cable

Mounted coupler 36 mm

Mounted coupler 61 mm

Upgrade Set T 30-E

More products SEBAKMT

SEBA KMT PD LOC PARTIAL DISCHARGE PINPOINTING SYSTEM FOR RPECISE LOCATION OF PD FAULTS IN MEDIUM VOLTAGE CABLES

• Precise PD pinpointing in mixed cable networks
• Location of faults in joints of single core cables
• Easy handling in the ?eld

SEBA KMT HPG 50..110-H DC & AC HIGH VOLTAGE CABLE TESTING SETS

• HPG 50-H, AC testing up to 35 kVRMS / DC-testing up to 50 kV
• HPG 70 / 80-H, AC testing up to 50 / 58 kVRMS / DC-testing up to 70 / 80 kV
• HPG 110-H, AC testing up to 78 kVRMS / DC-testing up to 110 kV
• Suitable for AC-testing and DC-testing
• Compact, cast-resin high-voltage transformers
• Separate control and HV-units
• Voltage continuously adjustable
• Powerful system: 1,2 kVA continuous operation, up to 3 kVA 60 min. short-time operation

SEBA KMT VCAM-5 SEWER PIPELINE VIDEO INSPECTION CAMERA

• One touch recording
• Lightweight and compact design
• Records to USB, SD or HDD
• JPEG still image capture
• Wi-Fi and Ethernet interface

SEBA KMT HV TESTER 25KV HIGH VOLTAGE DC TESTER

• DC output voltage of 0 - 25 kV
• Portable HV Tester
• DC and insulation testing of cables, joints, electrical fixtures, etc.
• High flexibility with built-in battery

SEBA KMT CDS CABLE DIAGNOSTIC SYSTEM FOR THREE PHASE IRC AND RVM DIAGNOSTICS

• Absolutely non-destructive condition evaluation of PE / XLPE / paper-oil insulated cable systems
• Simple operation and automatic measurement procedures
• Three-phase parallel measurement for current and voltage - duration of a complete measurement 1 hour
• Extended dynamic range for IRC measurement for long cable segments
• Measurement of charging current during formation

SEBA KMT HPG 70-K 70KV DC HIGH VOLTAGE HIPOT TESTER

• fully insulated test set for DC testing up to 70 kV
• Testing of cables, switchgear, current-transformers, MV plant/ component testing,
• Highest safety thanks to fully insulated design
• Compact and lightweight
• Separate control and HV-unit
• Voltage continuously adjustable
• Expandable with a VLF CR attachment for VLF testing on MV cables

SEBA SMART THUMP 16 CABLE FAULT LOCATION SYSTEM ON LOW AND MEDIUM VOLTAGE CABLES

• 1500J at 8 / 16 kV, 16 kV DC-HV proof test 23/46mA Burning
• Integrated ARM and ICE Prelocation
• Easy Go - automatic sequence to proof test, pre-locate & pinpoint
• Automatic interpretation of test results
• Sunlight readable, transflective 5.7" TFT colour display
• Safe OP Check protects user from incorrect or faulty lead connections
• USB interface for trace export via USB flash drive

SEBA KMT SEBALOG CORR MULTI-CORRELATOR LOGGER FOR WATER LEAK DETECTION AND LOCATION

• Correlation with up to 8 sensors at the same time
• GPS navigation directly to the leak
• Radio communication to the sensors
• No staff needed for night measurement
• Sound velocity assistant (V-assistant)
• Unique pinpointing mode

SEBA KMT VLOCCAM2 LOCATION SYSTEM FOR LOCATION AND DEPTH MEASUREMENT OF SEWER TV CAMERAS

• Directional compass for fast and precise location of camera heads or sondes
• Continuous depth measurement
• Passive frequencies (current and radio signal) to prevent cable damage
• Sunlight-compatible colour display

SEBA KMT LPD MONITOR ON-LINE PD PARTIAL DISCHARGE MONITORING SYSTEM FOR MV AND HV

• Portable online PD measuring system for monitoring MV and HV systems
• 16 channels
• Allows ef? cient forward planning of necessary maintenance work
• Quick and easy to install
• Integrated automatic knowledge-based evaluation of measured PD levels
• Current status can be viewed at any time via remote access