Metrel MI6201 MULTINORM Class 1 and Class 2 Sound Level Meter with Environement Parameters Testing
OBSOLET PRODUCT ( * OUT OF USE )

• 1000V AC, DC voltage measurement;
• 8A AC, DC current measurement;
• 600O..60MO Resistance measurement;
• 60nF..3mF Capacitance measurement;
• 5Hz..1MHz Frequency Measurement
• Temperature measurement(thermocouple type K included)

 

• meets overvoltage category CAT IV 1000 V
• TRMS AC, DC voltage measurement;
• TRMS AC, DC current measurement;
• Capacitance measurement;
• Resistance measurement;
• Diode test;
• Frequency measurement;
• Electric field detection;
• Continuity test (acoustic signaling);
• Temperature measurement.

 

• DC insulation resistance with test voltages up to 1000V
• PE conductor continuity test
• Loop and Line impedance also without RCD triggering
• RCD test
• Illumination
• Phase sequence in 3-phase systems
• Measurements on earthling and lightning systems with included 2-clamp method (without junctions disassembling).
• Electrical power and consumption measurement,
• current and voltage harmonics measurement,
• phase angle

 

• Wiring check
• DC insulation resistance
• Continuity test
• Line and Loop resistance
• RCD test
• Phase sequence
• Pass/Fail visual and audio presentation of results

 

• Five pre-set test voltages: 250V, 500V, 1000V, 2500V and 5000V
• up to 1 T? for insulation resistance
• 600 V for voltage measurements
• Quick setting - Quick & Easy test voltage selection
• Faster testing - 5 mA current source for quick charging of capacitive loads
• Safe - High CAT IV, 600 V voltage protection
• Easy to read - Large, bright LCD display with backlight

 

• Adjustable test voltage from 250 V to 5000 V in 50 V steps.
• Resistance measuring range 5 T?.
• Adjustable measuring time from 1 second to 90 minutes.
• Automatic PI, DAR and DD index calculation and capacitance measurement up to 50µF.
• Automatic load discharge after completed measurement.
• Guard terminal for elimination of insulation surface currents.
• AC and DC voltage measurement up to 600 V.

 

• Simulation of common electrical installation usually met in an individual house or apartment
• Various test methods supported by different test instruments can be presented.
• Acceptable or faulty parameters can be preset by five »fault« switches.
• Some real elements of electrical installation are placed on the front panel like RCD protection device, ON/OFF switch

 

• large 2-line 500.000 counts LCD display
• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 50nF..25mF Capacitance measurement;
• 500O..50MO Resistance measurement;
• Diode test;
• 5Hz..1MHz Frequency of digital signals measurement
• Temperature measurement(thermocouple type K included)

 

• Field proven instrument for under-wall low voltage installation tracing
• fuse finding
• short-circuit spot determination and metal installation tracing
• Can be used on energized or voltage-free systems.
• Tips and detailed descriptions of connection schemes for various combinations from everyday practice.

 

• DC insulation resistance,
• PE conductor continuity test,
• Line and Loop resistances with Fuse evaluation table built-in,
• RCD test with Trip lock function, phase sequence in 3-phase systems,
• on-line voltage monitor,
• 3-wire Earth resistance test with built-in battery operated generator,
• Leakage Current test,
• test of Luminance with optional LUX meter probe.