Multifunction Instrument for Testing & Veryfying Single Phase Photovoltaic Installations HT Italia Solar I-V
OBSOLET PRODUCT ( * OUT OF USE )

Code: HT Italia Solar I-V


 

Datasheet PDF, 1.07 Mb

Description

  • Testing on PV installation
  • DC/AC TRMS Voltage
  • DC/AC TRMS Current
  • DC power
  • AC active power on single-phase systems
  • Solar irradiation [W/m2] with reference cell
  • Temperature environmental and module by means of probe PT1000
  • Synchronization with remote unit SOLAR-02
  • Display of real-time irradiation and temperature
  • Use of PDC compensation ratios according to environmental and module temperature
  • Recording of parameters with programmable IP (5s - 60min)
  • Internal memory for data saving
  • Recalling results on the display
  • Optical/USB port for PC connection
  • Help on line on the display

 

  • I-V curve measurement
  • Measurement of output voltage from module/string up to 1000V DC
  • Measurement of output current from module/string up to 10A DC
  • Measurement of solar irradiation [W/m2] with reference cell
  • Measurement of environmental and module temperature, automatic or by means PT1000
  • Measurement of output DC and nominal power from module/string
  • Numerical and graphical display of I-V characteristic
  • Measurement of the resistance of photovoltaic module series
  • Mechanical inclinometer for the detection of the incidence angle of solar irradiation
  • 4-terminal measuring method
  • Comparison with standard conditions (STC 1000 W/m2, 25°C)
  • Evaluation of testing result: OK / NO
  • Management of up to 30 types of photovoltaic modules in the internal database
  • Internal memory for data saving
  • Recalling results on the display
  • Optical/USB port for PC connection
  • Help on line on the display
 

Standard accessories

  • SOLAR-02: RF remote unit to record irradiation and temperature
  • KITGSC4: Kit including 4 banana cables + 4 alligator clips
  • KITPVMC3: Kit including 2 Multi-Contact 3 adapters for MC3 connectors
  • KITPVMC4: Kit including 2 Multi-Contact 3 adapters for MC4 connectors
  • HT4005K: Transducer for AC currents 200A/1V AC
  • HT4004N: Transducer for DC currents 10-100A/1V DC
  • HT304: reference cell for irradiation measurement
  • PT300N: Double temperature probe (PT1000 + environmental)
  • M304: Mechanical inclinometer
  • TOPVIEW2006: Software on CD-ROM + optical/USB connection cable C2006
  • BORSA2051: Carrying case
  • User manual on CD-ROM
  • Quick reference guide
  • Calibration certificate ISO9000
 

Recommended options

  • MPP300: Multi-string three phase adaptor
  • HT4004P: Unbatteried transducer for DC current 0-10, 0-100A, diameter 30mm (*)
  • HT96U: Transducer for AC currents 1-100-1000A/1VAC
  • HT97U: Transducer for AC currents 10-100-1000A/1VAC
  • HT98U: Transducer for AC/DC currents 1000 A AC/DC
  • HTFLEX33D: Flexible clamp AC 3000A, diameter 174mm (*)
  • HTFLEX35: Flexible clamp AC 3000A, diameter 274mm (*)
  • KITPVEXT25M: set of 2 banana cable 4mm, Green/Black, 25m lenght
  • SP-0400: Free hands kit
  • 606-IECN: Connector with magnetic clip
  • (*) to be used with MPP300 only
 

More products HT ITALIA

MACROEVTEST MULTIFUNCTION TESTER WITH POWER ANALYSIS AND ELECTRIC VEHICLE CHARGING STATIONS EVSE

• Multifunction instrument for electrical installation safety testing
• power quality analysis
• EVSE safety testing
• MACROEVTEST is the new HT instrument to perform verification and control of electric car charging stations (EVSE) safety according to IEC / EN 61851-1 and IEC / EN60364-7-722 standards

 

DIGITAL PORTABLE MULTIMETERS HT ITALIA

• DC Voltage
• AC TRMS Voltage
• DC Current
• AC TRMS Current

 

POWER ANALYZER CURRENT CLAMP METER HT ITALIA HT9022

• DC, AC + DC TRMS current up to 1000A
• DC, AC + DC TRMS voltage up to 1000V
• Resistance and continuity test
• Active, Reactive, Apparent power on Single/Three phase systems
• Active, Reactive energy on Single/Three phase systems
• Power Factor on Single/Three phase systems
• Harmonic voltage/current up to 25th with THD% calculation
• PC connection via Bluetooth

 

HT I-V500W PHOTOVOLTAIC SYSTEM ANALYZER WITH I-V CURVE TRACER 1500V 15A

• I-V Curve Tracer for maintenance and troubleshooting of photovoltaic systems.
• Measurement of I-V Curve of one or more modules or of one whole string up to 1500V/10A
• Measurement of open-circuit voltage and short-circuit current Voc/Isc
• Database of 30.000 selectable photovoltaic modules

 

THT600 INFRARED CAMERA 384X288PXL

• IR Resolution 384x288 pxl
• Temperature range -20° ÷ 650°C
• Image frequency 50Hz
• Thermal sensitivity / NETD <0.05°C @ 30°C / 50mK
• Field of view (FOV) 17° x 12.7°

 

DIGITAL PROCESS CALIBRATOR PORTABLE MULTIMETER HT ITALIA HT8000

• Generation of output voltage signal with amplitude up to 10VDC
• Voltage measurement up to 10VDC
• Generation of output current signal with amplitude up to 24mADC
• Current measurement up to 24mAVDC
• Current measurement in percentage format (4-20mA)
• Loop current measurement of external transducers

 

EARTH RESISTANCE AND LOOP IMPEDANCE RCD TESTER HT ITALIA SPEED 418

• Tripping time on RCD type A, AC General and Selective with currents 10, 30,100, 300, 500mA
• Tripping time on RCD type AC General with currents 30, 30x5, 100, 300mA
• Tripping current on RCD type A, AC General and Selective Global earth resistance without RCD tripping
• Line/Loop impedance, also with high-resolution (0.1m )( with optional accessory IMP57)
• Optical/USB interface for connection to PC

 

THT80 COMPACT INFRARED THERMOGRAPHY CAMERA 120X90PXL

• IR Resolution 120 x 90 pxl
• Temperature range -20° ÷ 550°C
• Image frequency 50Hz
• Thermal sensitivity / NETD <0.05°C @ 30°C / 50mK
• Field of view (FOV) 50° x 37°

 

HT9025T CURRENT CLAMP METER WITH INFRARD CAMERA AND 1500V DC

• TRMS
• Current measuring range 1000A
• AC/DC current AC+DC
• AC/DC voltage 1000VAC/1500VDC
• IR Resolution 120 x 120 pxl

 

INSULATION CONTINUITY MEGOHMMETER AND DIGITAL MULTIMETER HT ITALIA M72

• Insulation Resistance with 250, 500VDC
• Measurement range up to 1GOhm
• Automatic discharging object after test
• Continuity test of protective conductors with 200mA
• DC Voltage
• AC TRMS Voltage