Description
GSC60
One instrument for all electrical safety tests and Power Quality analysis
ELECTRICAL SAFETY TESTING CEI 64-8 › Earth Resistance with voltammetric method with 2
or 3 points in TT, TN and IT systems, overall earth
resistance measurement via outlet and with T2100
voltammetric clamp (optional)
› Ground resistivity with Wenner 4-wire method. › Differential tests type A, AC, B, B+, F up to 1A
› General, Selective and Delayed
› Tests on RCD with split toroid up to 10A
› Differential trip time and current › Insulation Resistance measurement with test voltage
up to 1000V DC
› Protective conductor continuity measurement with
test current 200mA
› Protective conductor continuity measurement with
current >10A (with optional EQUITEST accessory)
› Advanced Loop Magnetothermal protection, fuse
testing and cable sizing
› Measurement of voltage drop on line › Phase sequence (SEQ) testing › Leakage current measurement and recording over
time
› TopView software for data download and report
generation
NETWORK AND ENERGY CONSUMPTION
ANALYSIS › Measurement and recording of electrical
parameters (Voltages, Currents, Powers, Energies,
cosphi, etc.) in Single-phase and Three-phase systems
› 9 types of available electric systems › 632 parameters recordable for more than two
months
› Real-time display of waveforms, harmonics, vector
diagrams and phase summary function
› Voltage anomalies (sags, swells) with a minimum
duration of 20ms
One instrument for all electrical safety tests and Power Quality analysis
GSC60 was designed with the aim of making safety of electrical installations visible and valuable, easily and quickly.
Thanks to the new HTOS™ system the unit displays a message OK - NOT OK after completing the test.
The user interface, totally updated under HTOS™, permits to set and carry out measurements in few steps.
You can store all recorded data and create folders and subfolders for each kind of test adding comments and notes by means of virtual keyboard.
GSC60 is also a three-phase power and energy consumption analyzer boasting, as unique feature, its FREE APP HTAnalysis compatible with iOS and Android.
Test results can be transferred through Wi-Fi onto smartphone or tablet enclosing a picture, a video or a voice note to each measurement. You can transfer everything onto HT Cloud and make data available in real time for your colleagues all over the world.
GSC60 makes the job of installer, electrician or consultant easy, rapid and cost-effective.
HTOS™Control the Power.
Get access through touchscreen to your measurement. Quickly set measurement parameters and press GO. Here it is, HTOS™, designed to make your work easier. Its’ result options OK and NOT OK as well as its Help OnLine will make it your best partner and save you time.
Evolution of saving.
Virtual keyboard to enter comments
Saving on file structure
New detailed reports with TopView software
Electrical safety measurements
AUTO Function to work easier.
Rapid setting of limit values and test voltages
through virtual keyboard
Setting of Timer for the test where is available.
Earth Resistance
Earth resistance with 2- or 3-pole volt-ampere method in TT, TN and IT systems.
Soil resistivity with 4-pole Wenner method.
Stackless earth ground resistance measurement with T2100
Non-trip earth loop impedance measurement
Power Quality and energy analysis
9 types of electrical systems available.
632 parameters can be recorded for over two months.
Real-time display of all waveforms, harmonics, vector diagrams as well as summary function on phases for a quick reading of the most important parameters.
Detection of voltage anomalies with a resolution of 20ms.
Measures and record the electrical absorption of all the equipment connected to the main power supply.
Full Batteries at All Times.
GSC60 is so compact that a new power technology had to be designed to charge batteries.
You just need to power the unit and it will charge the batteries.
Or you can always start working by simply replacing them with standard AA batteries.
All in real time!
Wi-Fi connection allows you to display on your tablet/smartphone/PC in real time:
Waveforms
Vector Diagrams
Harmonics
All parameters of each phase
Zoom, Zoom, Zoom! Enlarge, Jump, Analyze. Two finger needed.
With HTAnalysis™ you can:
Analyze the full recording on your device
Compare up to 16 quantities at the same time Immediately analyze
events like voltage dips and peaks
Use the JUMP function to know the energy consumption anytime
Use again the JUMP function to display to display the harmonicsin
any point of the recording
HTAnalysis™ and the electrical safety
During the measures campaigns you can:
Add text and vocal comments
Add to each measure photos and videos
Customize your measurements
HT Cloud™ Share.
Whenever, whatever and wherever.
Install App HTanalysis to avail yourself of HTCloud™ database and share measurement results and recordings with your colleagues anytime and from any place on the planet.
Function with THD%
Voltage/current vector diagram
Voltage/current waveforms
Tables or histograms of Harmonics and THD%
Summary table of main electric parameters
Help on line on the display
Protection categoryCAT IV
ELECTRICAL SAFETY TESTING CEI 64-8 › Earth Resistance with voltammetric method with 2 or 3 points in TT, TN and IT systems, overall earth
resistance measurement via outlet and with T2100
voltammetric clamp (optional)
› Ground resistivity with Wenner 4-wire method. › Differential tests type A, AC, B, B+, F up to 1A
› General, Selective and Delayed
› Tests on RCD with split toroid up to 10A
› Differential trip time and current › Insulation Resistance measurement with test voltage
up to 1000V DC
› Protective conductor continuity measurement with
test current 200mA
› Protective conductor continuity measurement with
current >10A (with optional EQUITEST accessory)
› Advanced Loop Magnetothermal protection, fuse
testing and cable sizing
› Measurement of voltage drop on line › Phase sequence (SEQ) testing › Leakage current measurement and recording over
time
› TopView software for data download and report
generation
NETWORK AND ENERGY CONSUMPTION
ANALYSIS › Measurement and recording of electrical
parameters (Voltages, Currents, Powers, Energies,
cosphi, etc.) in Single-phase and Three-phase systems
› 9 types of available electric systems › 632 parameters recordable for more than two
months
› Real-time display of waveforms, harmonics, vector
diagrams and phase summary function
› Voltage anomalies (sags, swells) with a minimum
duration of 20ms
Datasheet
PDF, 0.4 Mb
