0 to 300 V DC/AC Voltage measure
0 to 15 V DC Voltage source / simulate
0 to 110 mA DC Current measure
0 to 22 mA DC Current source / simulate
0 to 11 kO Resistance measure / source / simulate
1 to 50 kHz Frequency measure / source / simulate
PC interface and data logging
Integrated HART communication functions, permitting you to monitor, control, and calibrate HART instrumentation
Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
Power transmitters during test using loop supply with simultaneous mA measurement
Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
Measure and source simultaneously with one compact, rugged, reliable tool
Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
Easy to use
Three year warranty
Bright white display. Read both sourced and measured parameters
Multi lingual interface
Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1msec.

Standard accessories

BC7217 battery charger
BP7217 battery pack
Instruction manual
NIST-traceable calibration report and data
One set of TP220 test probes
Two sets of AC220 test clips
Two sets of TL224 industrial test leads

More products FLUKE

DOCUMENTING PROCESS CALIBRATOR-HART FLUKE 753

• Measure volts, mA, RTDs, thermocouples, frequency
• ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure
• Power transmitters during test using loop supply with simultaneous mA measurement
• HART Capabilities

PROCESS MULTIMETER FLUKE 789

• 0 to 1000 V DC/AC Voltage measure
• 0 to 1 A Current measure
• 0 to 20 mA, 4 to 24 mA Current source
• DMM and loop calibrator in one tool
• HART mode setting with loop power

FLUKE 1735 THREE PHASE POWER LOGGER

• Record power and associated parameters for up to 45 days
• Measure harmonic distortion caused by electronic loads
• Voltage event capture
• View graphs and generate reports

FLUKE 279 FC TRMS DIGITAL THERMAL MULTIMETER WITH TERMOVISION

• Full-featured multimeter with built-in thermal imager
• 15 measurement functions including: AC voltage with low-pass filter, DC voltage, Resistance, Continuity, Capacitance, Diode test, Min/Max/Avg, AC current (with iFlex), Frequency
• Image resolution-80 x 60
• 3.5 in /8.89 cm color LCD screen
• CAT III 1000 V, CAT IV 600 V measurement category

LASER DISTANCE METER 100M FLUKE 421D

• Ability to measure up to 100 m (330 ft)
• Instant measurement with one-button operation.
• Easy targeting with bright laser.
• Quick calculation of area and volume.
• Easy addition and subtraction of measurements.

FLUKE 83V HANDHELD DIGITAL MULTIMETER 3.75 DIGIT

• 3.75 digit
• 6000 count resolution
• 0.1% basic accuracy

RTD TEMPERATURE CALIBRATOR FLUKE 712

• -200 to 800�C Range Measure / simulate RTD (Pt 100)
• 0 to 3200 O Range Measure / simulate resistance
• 0.1 O, 0.1 �C Resolution

FLUKE 113 HANDHELD DIGITAL MULTIMETER 3 1/2 DIGIT

• 3.5 digit
• 6000 count
• 0.5% accuracy
• True-rms for accurate ac measurements on non-linear loads
• VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity

FLUKE 1630 EARTH GROUND CLAMP METER

• resistance range from 0.025 O to 1500 O
• large jaw opening of 35 mm
• ground leakage current, from 0.2 mA to 1000 mA
• ac current measurement range from 0.2 A to 30 A

FLUKE 123B 123B/S INDUSTRIAL SCOPEMETER HAND-HELD OSCILLOSCOPE 2X20MHZ

• 2-channel 20MHz
• Dual-input digital oscilloscope and multimeter
• 40 MHz or 20 MHz oscilloscope bandwidth
• Two 5,000-count true-rms digital multimeters
• Power measurements (W, VA, VAR, PF, DPF, Hz)
• Voltage, current and power harmonics
• Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect�® mobile app*