Measure pressure, 0.05% of full scale with internal sensor up to 5000 PSI/345 bar sensor (5000G model)
Measure mA with 0.015% accuracy and 0.001 mA resolution, while sourcing 24V loop power
Measure pressure to 10,000 psi/700 bar using one of 29 Fluke 700Pxx Pressure Modules
1/8 NPT female pressure fitting
Compatible with non-corrosive Gases and liquids
Select eleven different engineering units
Zero, min, max, and hold functions
Calibrate P/I instruments with simultaneous pressure and current measurement
Pressure switch test function captures set, reset and Deadband values of a pressure switch
Error% calculation of mA measurements for quick pass-fail decisions
Long lasting battery life
Holster features test lead storage
Compatible with Toolpack magnetic hanging system
New switch test

Standard accessories

Protective Yellow Holster with test lead storage
Instructions Sheet (14 languages)
single 9V alkaline battery
Test Leads and Alligator Clips
NIST- traceable calibration report and data

Recommended options

Fluke 717 1G	Pressure Calibrator -1 to 1 PSI, (-689 mbar to 689 mbar, -689 to 689 kPa)
Fluke 717 30G	Pressure Calibrator -12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)
Fluke 717 100G	Pressure Calibrator -12 to 100 PSI, (-850 mbar to 7 bar, -85 to 68948 kPa)
Fluke 717 300G	Pressure Calibrator -12 to 300 PSI, (-850 mbar to 20 bar, -85 to 20684 kPa )
Fluke 717 500G	Pressure Calibrator 0 to 500 PSI, (0 mbar to 347 bar, 0 to 34474 kPa )
Fluke 717 1000G	Pressure Calibrator 0 to 1000 PSI, (0 mbar to 69 bar, 0 to 68948 kPa )
Fluke 717 1500G	Pressure Calibrator 0 to 1500 PSI, (0 bar to 1034 bar, 0 to 10342 kPa )
Fluke 717 3000G	Pressure Calibrator 0 to 3000 PSI, (0 bar to 207 bar, 0 to 20684 kPa)
Fluke 717 5000G	Pressure Calibrator 0 to 5000 PSI, (0 bar to 345 bar, 0 to 34474 kPa)

More products FLUKE

CURRENT CLAMP METER 400 A FLUKE 321

• Measures AC current to 400 A with 0.1 A resolution
• Measures AC volts to 600 V, with 0.1 V resolution to 400.0 V
• Resistance measurement to 400 O
• Precise measurements with 1.8% basic accuracy

FLUKE 179 HANDHELD DIGITAL MULTIMETER 3.5 DIGIT

• 3.5 digit
• 6000 count resolution
• 0.09% basic accuracy
• True RMS voltage and current measurements
• Digital display with analog bargraph and backlight
• Temperature measurements

CURRENT CLAMP METER TRUE-RMS AC/DC FLUKE 375

• iFlex fexible current probe compatible
• 600 A AC and DC current measurement with fxed jaw
• 2500 A AC current measurement with iFlex (sold separately)
• 600 V AC and DC voltage measurement
• True-rms AC voltage and current
• Frequency measurement to 500 Hz
• 60 k O resistance measurement
• 500 mV dc measurement range
• 1000 µF capacitance measurement

HANDHELD LOOP CALIBRATOR FLUKE 707EX

• 0 to 28 V DC Voltage measure
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• mA accuracy of 0.015%
• For use in explosion endangered areas ATEX certifed ( II 2 G Eex ia IIC T4)

LASER DISTANCE METER 100M FLUKE 424D

• The ultimate Fluke laser distance meter
• Measures up to 100 m (330 feet)
• Feature-rich meter includes tilt sensor for hard-to-reach measurements, corner angle feature and compass

FLUKE NORMA 5000 PRECISION POWER ANALYZER

• 3, 4 or 6 power phases
• Bandwidth from dc to 3 MHz / 10 MHz
• FFT analysis, vector diagram, and Digital Oscilloscope
• Voltage, current and power harmonics measured up to the 40th harmonic

FLUKE 77IV HANDHELD DIGITAL MULTIMETER 3.5 DIGIT

• 3.5 digit
• 6000 count resolution
• 0.3% basic accuracy
• Large display
• Backlight for work in dim areas

INFRARED THERMOMETER WITH CONTACT THERMOCOUPLE FLUKE 561 HVAC PRO

• IR Thermometer with K-type thermocouple capability
• IR thermometer for quick measurements up close, or at a distance, without a ladder
• Contact thermometry capability, compatible with all standard mini-connector type K thermocouples, preserves your investment in thermocouples
• Fabric hook-and-loop fastener pipe probe for superheat and sub-cooling and other contact and ambient measurements
• Single-point laser sighting
• Temperature range of -40 °C to 550 ° C (-40 °F to 1022 °F) covers most industrial and residential applications

TRUE-RMS CURRENT CLAMP METER 400 A FLUKE 325

• 400 A ac and dc current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection
• Temperature and capacitance measurement
• Frequency measurement

DOCUMENTING PROCESS CALIBRATOR FLUKE 743B

• 0 to 300 V DC/AC Voltage measure
• 0 to 15 V DC Voltage source / simulate
• 0 to 110 mA DC Current measure
• 0 to 22 mA DC Current source / simulate
• 0 to 11 kO Resistance measure / source / simulate
• 1 to 50 kHz Frequency measure / source / simulate
• PC interface and data logging