In the field, the FTV200 is ideal for checking solar panels. The FTV200 can be used to carry out tests in compliance with the EN 62446 standard on a panel or string of panels. With the FTV200, all the measurements are performed according to the IEC / EN 60891 standard. To comply with this standard, the inclinometer must be used.

Advantages:

- Better graphical resolution of the I-V curves

- Larger integrated library of panels

- More measurements stored

- Possibility of measuring on all solar panel technologies PV (crystalline, thin-film, etc.)

- The instrument indicates the result: GO-NOGO

- Tests and measurements in compliance with the international standards

- Operation while charging

Measurements:

I-V curve with cursor
Voltage measurement up to 1,000 VDC
Current measurement up to 10 ADC
Pyranometer up to 2,000 W/m2
MPP curve with cursor
More than 500 points per curve
PMAX power measurement
Mesure of résistance Rs
80 MB internal storage capacity
More than 10,000 different panel references
Possibility of external USB key for storage
Bluetooth communication

Standard accessories

FTV200 I-V TRACER With pyranometer and Pt100 .. P01160740

Carrying bag, set of 3 m cables, set of

MC4 adapters (red/black), MC4/ ½ 4

mm banana adapter, magnetic stylus

for touch screen, USB key, professional

pyranometer, Pt100 probe for ambient

temperature, 1 mains adapter, set of

flexible test probes, operating manual, PC

software and certificate of conformity.

FTV200 I-V TRACER .. P01160745

Carrying bag, set of 3 m cables, set of

MC4 adapters (red/black), cable with

MC4/4 mm plug, magnetic stylus for

touch screen, USB key, 1 mains adapter,

set of flexible test probes, operating

manual, PC software and certificate of

conformity.

Recommended options

Pyranometre ................................... P01160730

Pt100 ambient temperature probe .......................... P01160731

Pt100 contact temperature probe .......................... P01160732

FTV remote unit .................................. P01160736

FTV200 Bluetooth communication kit ........................ P01160739

Carrying bag ................................... P01298066

USB/RS232 adapter ..................................HX0055

Inclinometer ................................... P01102115

Flexible test probes ................................ P01102116

Stylus for touch screen

More products CHAUVIN ARNOUX

EARTH GROUND RESISTANCE TESTER ON PYLONS CHAUVIN ARNOUX CA6474

• Ideal for earth measurements on pylons
• measurement range: 0.001 O to 99.99 kO
• resolution: 0.001 to 10 O
• no-load voltage: 16 or 32 VRMS
• measurement frequency: 41 Hz to 5,018 Hz
• measurement of resistance of earth stakes: 0.01 O to 100kO
• leakproofing: IP53

EARTH GROUNDING RESISTANCE TESTER CHAUVIN ARNOUX CA6462

• 3-in-1 tester: resistivity, earth, coupling
• measurement range: 0.00 to 2,000? (3 automatic calibres)
• change from 4-wire method to 3-wire method thanks to 1 removable captive bar between E and ES
• 3 fault presence indicators to validate measurement
• measurement frequency: 128Hz

EARTHING RESISTANCE TESTER CHAUVIN ARNOUX CA6471

• extensive measurement ranges: 0.001? to 100 k?
• adjustment of the measurement frequency between 41 Hz and 512 Hz
• 10 times greater accuracy due to its 4-pole measurement method
• measuring soil resistivity
• calculate r automatically by the Wenner or Schlumberger methods
• Ergonomic, comprehensive and accurate

EARTH AND LOOP RESISTANCE TESTER CHAUVIN ARNOUX CA6456

• loop resistance and impedance: L-N, L-L, and L-PE from 0.20 to 4 kO
• short-circuit current displayed up to 40 kA by calculation (Uref/ZL-PE)
• clamp measurement of current and leakage current (option)
• Cat. III, 600V

ENERGY POWER ANALYZER AND MOTOR DIAGNOSTIC TESTER CHAUVIN-ARNOUX CA8220

• Voltage and current with instant display
• TRMS AC+DC value
• peak values and THD
• Short-term flicker measurement
• offers instant display of the waveform
• comprehensive power and energy analysis on both single-phase and three-phase systems
• Up to several days½ recording
• Customization of alarm settings

EARTH RESISTANCE DIGITAL TESTER CHAUVIN ARNOUX CA6423

• earth resistance: 0.00 to 2,000O (3 cal.)
• 3 fault presence indicators to validate the measurement
• measurement frequency: 128Hz
• connection of rods to colour-coded terminals
• a removable captive connection strip between H and S for measurement of 2-wire resistance
• large 2,000-count digital display with 18mm digits: excellent readability

INSULATION RESISTANCE MEGOHMMETER 1KV CHAUVIN ARNOUX CA6541

• insulation: up to 4TO (5 cal.) at 50/100/250/500 and 1,000V DC
• automatic calculation of insulation quality ratios: DAR and PI
• programmable test period and plotting of the R(t) curve (automatic memorisation of 20 samples)
• automatic indication of voltage before and after measurement: 1 to 1000V AC/DC
• resistance: from 0.01O to 400kO
• continuity: 0.01O to +40O (audible beep and lead compensation)
• automatic measurement capacity after each insulation measurement: 0.005 to 4.999 ½F

MEGOHMMETER 10KV CHAUVIN ARNOUX CA6550

• Wide measurement range from 10 kohm to 25 Tohm
• Fixed or programmable test voltage from 40V to 10 kV
• 5mA max charging current
• Large backlit LCD screen with digital display, bargraph and R(t)+u(t), i(t) and i(u) graphs
• Automatic ratio calculation: DAR / PI / DD / DR (ppm/V)

DIGITAL INSULATION MEGOHMMETER 5KV CHAUVIN ARNOUX CA6547

• wide range from 30k? to 10T? !
• 4 fixed test voltages: 500 / 1,000 / 2500 and 5,000V
• programmable test voltage position: from 40 to 5,100V in increments of 10V or 100V
• giant backlit LCD screen with digital display + bargraph
• qualitative analysis of insulation: automatic calculation of DAR, PI and DD (dielectric discharge) ratios
• plotting of the R(t) curve

MULTIFUNCTION ELECTRICAL MACHINE TESTER CHAUVIN ARNOUX CA6155

• Measurements in compliance with the IEC 60204 Ed.5 / VDE701/702 / IEC 61439 (IEC 60439) standards
• 200 mA and 10 A continuity measurements
• Insulation resistance at 250 VDC and 500 VDC
• Dielectric test at 1,000 V / 1,890 V / 2,500 V
• Leakage current measurement by substitution method
• Differential leakage current
• Contact leakage current
• Mains power-lead polarity test